AFS2400 and AFS4800 Rack Mountable Power Shelves • • • • • Front-end shelves for AFE1200 series power supplies Distributed power architecture UL and TUV approval Hot-swap power system N+1 redundancy The AFS2400 and AFS4800 power shelves are designed to house Artesyn standard AFE1200 series front-end power supplies. The shelves mount into standard 19 inch racks. The power shelves accept full range (85 to 264VAC) AC power and deliver a regulated DC bus voltage generated from the AFE1200 power supplies. The power shelf provides input filtering and protection, and individual 20 Amp circuit breakers for each AFE1200 power supply are provided on the front end of the shelf. An output bus bar on the rear of the unit is provided for distribution of the main output to system payload. Control, diagnostic and protection signals and the auxiliary output from AFE1200 power supplies are routed through the power shelf to a parallel interface connector on the rear of the unit. Clearance is provided on the rear of the unit to maintain adequate airflow and cooling of the AFE1200 power supplies mounted within the shelf. [ 2 YEAR WARRANTY ] POWER SHELF MAIN OUTPUT POWER N+1 REDUNDANT POWER HEIGHT AFE1200 POWER SUPPLIES SIGNAL INTERFACE AFS2400-2U2P 2400W 1200W 2U (3.5 inch) 2 Parallel via 25 pin D type connector AFS4800-4U4P 4800W 3600W 4U (7.0 inch) 4 Parallel via 37 pin D type connector AFS Power Shelf Characteristics POWER MODULE POWER SHELF AFE1200-96S48NA AFE1200-96S24NA AFS2400-2U2P 48V @ 50A 24V @ 100A 12V @ 2A AFS4800-4U4P 48V @ 100A 24V @ 200A 12V @ 4A AFE1200 Output Configurations with AFS Power Shelves Nominal Input Voltage Line Current (Typical) 85VAC 17.5A rms 120VAC 12.1A rms 220VAC 6.5A rms 240VAC 6.0A rms AC Input Line Cord Current (for each AFE1200 module within power shelf) PAGE 1 AFS2400/4800 Power Shelves AFS2400 and AFS4800 Rack-mountable power shelves for AFE1200 series modules Mechanical Notes for AFS2400-2U2P Interface Drawing 1 All dimensions in inches (mm). 13.81 (350.77) AFS 2400-2U2P MODLAR POWER SYSTEM TWO 1200W HOT PLUGGABLE POWER SUPPLIES OPTIONAL SYSTEM CONTROL MODULE 2U HIGH, 19 INCH SHELF DESIGN CUSTOMER SIGNAL CONNECTOR 25 POSITION DSUB RECEPTACLE MATE - 25 POS DSUB PLUG CUSTOMER AC INPUT CONNECTORS MATE - HUBBELL H320C DC OUTPUT TERMINALS #10 STUDS NORMAL 17.33 (440.18) AIR FLOW ALLOW 6.0" MIN CLEARANCE BOTH FRONT AND BACK FOR ADEQUATE COOLING POS NEG REAR VIEW OF SHELF WITH COVER REMOVED FOR CLARITY 0.12 (3.05) POWER SYSTEM OPTIONAL CARD SLOT 1200 WATT HOT PLUGGABLE POWER SUPPLIES AC SECTION BREAKERS / LINE FILTERS 1.50 (38.10) REF 0.500 (12.700) 0.265 (6.731) AC POWER A A MODULE AC POWER B V+ V+ AC GOOD AC GOOD FAIL FAIL PWR GOOD PWR GOOD V- V- OPEN FULLY-INSERT UNIT 0.93 (2.362) REF CLEARANCE TO ACCOMMODATE CABINET RAIL MTG/SUPPORT MOUNTING BRACKETS OPTIONAL LOCATION B 3.000 (76.200) MODULE 3.47 (88.14) OPEN FULLY-INSERT UNIT 18.2 (462.3) 0.235 (5.969) 18.98 (482.09) ALL MEASUREMENTS INCHES (MM) International Safety Standard Approvals AFS4800-4U4P safety approval is pending EN60950/IEC950 File No. E9972397 UL1950 File No. E135734 Please consult our website for the following items: ✔ Application Note http://www.artesyn.com PAGE 2 AFS2400/4800 Power Shelves AFS2400 and AFS4800 Rack-mountable power shelves for AFE1200 series modules Mechanical Notes for AFS4800-4U4P Interface Drawing All dimensions in inches (mm). 17.32 BATTERY MANAGEMENT INTERFACE CUSTOMER MAIN POSITIVE OUTPUT POWER BUS ACCESS (10-32 STUDS) CHASSIS GND CUSTOMER @$) VAC INPUTS HUBBELL H320BL MATE - HUBBELL M320C 14.50 .012 AIR FLOW NORMAL 1 AC SECTION BREAKERS/LINE FILTERS MODULE SIGNAL/CONTROL INTERFACE CUSTOMER MAIN POSITIVE OUTPUT POWER BUS ACCESS 2 PLACES (10-32 STUDS) 1.62 MAX VIEW A-A REAR VIEW ALLOW 6.0" MIN CLEARANCE BOTH FRONT AND BACK FOR ADEQUATE COOLING AFE1200 Series HOT PLUGGABLE POWER SUPPLIES POWER SYSTEM CONTROL MODULE A 0.27 1.75 6.97 5.25 1.75 1.75 17.97 18.44 0.09 A 18.98 PAGE 3 DS_AFS2400_4800_20010403.PDF Data Sheet © Artesyn Technologies® 2001 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.