NLP250 Series Single output AC/DC POWER SUPPLIES • • • • • • • • • • • • 1 250 W AC/DC Universal Input Switch Mode Power Supplies NEW Product Active PFC and EN61000-3-2 compliant 250 W on main channel with forced air Low profile fits 1U applications U-Channel for maximum thermal performance 5 V standby output 12 V fan output Integrated ORing diode Active current sharing Integrated control and monitoring features Overcurrent, overvoltage and overtemperature protection Compliance to EN55022-B conducted noise standard Available RoHS compliant The NLP250 series offers up to 250 W in a U-Channel power supply. Its form-factor makes it suitable for use in low-profile applications, such as 1U rack equipment. The main output channel is compatible with systems that implement distributed power and point-of-load architectures. It can also be used to power electromechanical devices such as relays, motors and print-heads. An auxiliary output is also available for those systems that require "standby" operation. The features of this power supply make it suitable for use in Information Technology Equipment (ITE) and light industrial systems. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25 °C unless otherwise stated. OUTPUT SPECIFICATIONS EMC CHARACTERISTICS (continued) Total regulation (line and load) Main output Auxiliary outputs ±2.0% ±5.0% Turn-on delay @ 120 Vac Input 2.0 s max. Transient response Main output 50-100% step at 0.5 A/µs 5.0% or 250 mV max. dev., 1 ms max. recovery to 1% Temperature coefficient ±0.02%/°C Overvoltage protection Main outputs 115%, ±5% Short circuit protection Cyclic operation Continuous Minimum output current Singles Auxiliary outputs (See Note 8) 5 Vsb 12 V (fan) 0A 5 V @ 1.0 A 12 V @ 0.3 A INPUT SPECIFICATIONS Input voltage range Input surge current 264 Vac (cold start) Safety ground leakage current 264 Vac, 50 Hz Input current 120 Vac @ 250 W 230 Vac @ 250 W Input fuse UL/IEC127 EMC CHARACTERISTICS 40 A max. EN55022, FCC part 15 EN61000-3-2 Efficiency 115 Vac @ 250 W 230 Vac @ 250 W 84% typ. 86% typ. Isolation voltage Input/output Input/chassis 3000 Vac 1500 Vac Safety approvals (See Note 6) EN61000-4-2 EN61000-4-2 650g (22oz) Telcordia SR-332 MIL-HDBK-217F ENVIRONMENTAL SPECIFICATIONS 317,000 hours min. 158,000 hours min. (4) Thermal performance Operating ambient, 0° C to +70 °C (See derating curve) Non-operating -40 °C to +85 °C 250 W 0 °C to 50 °C ambient, 200 LFM forced air 175 W 0 °C to 50 °C ambient, convection cooled 50 °C to 70 °C ambient, Derate linearly to 50% load convection cooled Relative humidity Non-condensing Altitude Operating Non-operating Vibration (See Note 7) 5-500 Hz Shock per MIL-STD-810E T6.3 AH, 250 Vac Level 3 Level 3 20 ms @ 250 W UL/cUL UL60950-1, VDE EN60950-1 CAN/CSA22.2 No. 60950-1 Weight 2.78 A rms 1.36 A rms Level B Compliant 3 3 3 3 85 Vac @ 60 Hz 1 mA (5) Level Level Level Level Hold-up time 85-264 Vac 47-63 Hz EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 GENERAL SPECIFICATIONS MTBF (@ 25 °C) Universal input Input frequency range Conducted emissions Harmonic current Correction ESD air ESD contact Radiated immunity Fast transients Surge Conducted immunity (8) 5-95% RH 10,000 feet max. 30,000 feet max. 2.4 G rms peak 516.4 Part IV File Name: nlp250.pdf Rev: 29 May 2006 NLP250 Series Single output AC/DC POWER SUPPLIES For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT CURRENT OUTPUT RIPPLE VOLTAGE MIN 12 V 0A 24 V 48 V 2 250 W AC/DC Universal Input Switch Mode Power Supplies TOTAL MODEL REGULATION NUMBERS (9,10) (3) MAX (free air) (1,4) MAX (forced air) (2,4) NEW Product 14.6 A 21 A 120 mV ±2.0% NLP250R-96S12J 0A 7.3 A 10.5 A 240 mV ±2.0% NLP250R-96S24J 0A 3.65 A 5.25 A 480 mV ±2.0% NLP250R-96S48J Notes DERATING CURVE Output Power (Watts) Free air convection. Maximum continuous output power not to exceed 175 W. Refer to Figure 1 for the derating curve. 2 200 LFM forced air cooling from the longer side. Maximum continuous output power not to exceed 250 W. 3 Figure is peak-to-peak for room temperature rating. Output noise measurements are made across a 20 MHz bandwidth using a 6 inch twisted pair, terminated with a 10 µF tantalum capacitor and a 0.1 µF ceramic capacitor. 4 CAUTION: Allow a minimum of 1 second after disconnecting line power when making thermal measurements. For optimum reliability no part of the heatsink should exceed 115 °C and no semi-conductor case temperature should exceed 120 °C. 5 No external filtering required during conducted emissions testing but some applications may require additional filtering to achieve system compliance. Compliance with radiated EMI specifications may require mounting in a suitable enclosure. 6 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 7 Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G 8 5 V sb (standby) output is available whenever AC is present, regardless of remote ON/OFF signal status. 12 V (fan) present when main output is present. 9 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 10 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. 1 All Models Forced Air 250 W 24/48 V Free Air 200 LFM (1.0 m/s) FORCED AIR COOLING 12 V Free Air 175 W 125 W NATURAL FREE AIR 87 W 75 W 0W 0 °C 10 °C 20 °C 30 °C 40 °C 50 °C 60 °C 70 °C Figure 1: Derating Curve CUSTOMER MOUNTING HOLES MAX. SCREW PENETRATION 0.08IN 6-32 1.140 (28.96) J3 JP1 J4 J2 1 M3.0 5.850 (148.59) 1 0.25 (6.35) 6.250 (158.75) M3.0 4 PLACES 7.000 [177.80] 6-32 4 PLACES 2.500 (63.50) VR7 4.000 (101.60) 1 0.750 (19.05) J1 G L N 4.700 (119.38) 5.500 (139.70) 1.500 [38.10] BOTTOM VIEW Figure 2: Mechanical Drawing File Name: nlp250.pdf Rev: 29 May 2006 NLP250 Series Single output AC/DC POWER SUPPLIES 250 W AC/DC Universal Input Switch Mode Power Supplies For the most current data and application support visit www.artesyn.com/powergroup/products.htm CONNECTOR TYPE NEW Product CONNECTOR AND MATING CONNECTOR TYPES MATING CONNECTOR TYPE J1 Molex 09-65-2058 (5273 series) void pins 2 and 4 or equivalent Molex 09-52-4054 (5239 series) or equivalent with Molex 08-52-0072 (2478 series) or equivalent crimp terminals J2 Molex 22-23-2021 (6373 series) or equivalent Molex 22-01-3027 (2695 series) or equivalent with Molex 08-50-01113 (2759 series) or equivalent crimp terminals J3 Molex terminal block 387007504 or equivalent Terminal block contains #6-32 screw with clamp washer suitable for wire size 12-22 awg (0.5-2.5 mm2). Max Torque tp 1.36 Nm (12 in.lb) J4 Molex 22-23-2091 (6373 series) or equivalent Molex 22-01-3097 (2695 series) or equivalent with Molex 08-50-0113 (2759 series) or equivalent crimp terminals J1 PIN CONNECTIONS Pin 1 Ground/Earth Pin 2 Live Pin 3 Neutral Pin Pin Pin Pin 1 2 3 4 3 J3 PIN CONNECTIONS Vo +Main Output Vo +Main Output RTN Main Return RTN Main Return Pin 1 Pin 2 Pin Pin Pin Pin Pin Pin Pin Pin Pin 1 2 3 4 5 6 7 8 9 J2 PIN CONNECTIONS +12 V Fan Voltage SGND Return J4 PIN CONNECTIONS +S +Vo Remote Sense -S -Vo Remote Sense LS Load Share Signal PS OFF Remote ON/OFF signal NO PS ON Remote ON/OFF signal NC SGND Signal Common PW OK Power Good 5 Vsb DC OK Stand-by Voltage DC Power Good Signal International Safety Standard Approvals VDE0805/EN60950-1/IEC950/IEC60950-1 File No. 1040100-3336-0210 UL/cUL 60950-1/CSA-C22.2 60950-1 File No. E135734 Certificate No. 40014041 IECEE CB Ref DE1-32468 Datasheet © Artesyn Technologies® 2006 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: 4 Application Note www.artesyn.com File Name: nlp250.pdf Rev: 29 May 2006