NLP65-3334J Single output (adjustable) LOW POWER AC/DC POWER SUPPLIES • • • • • • • • • 50 W AC/DC Universal Input Switch Mode Power Supplies 1 5.0 x 3.0 inch card and 1.26 inch package (1U applications) Smallest industry standard package EN61000-3-2 compliance (HCC) Overvoltage and short circuit protection 50W with free air convection cooling EN55022, EN55011 conducted emissions level B EN61000-4-2,-3,-4, -5, -6 immunity compliant Adjustable output between 4.5 V and 5.5 V Available RoHS compliant The NLP65-3334J is a 50 W universal input ac-dc power supply on a 5 x 3 inch card with a maximum component height of 1.26 inches for use in 1U applications. This model has input harmonic current correction making the series ideal for product designs that will need to comply with EN61000-3-2 legislation. The NLP65-3334J provides 50 W of output power with free air convection cooling which can be boosted to 55 W with 20 CFM of air. The NLP65, with full international safety approval, meets conducted emissions EN55022 level B and has immunity compliance to EN61000-4-2,3,-4, -5, -6. The NLP65 series is designed for use in low power data networking, computer and telecom applications such as hubs, routers, POS terminals, internet servers, cable modems and PABX’s. This list is not exclusive as the generic feature set of the NLP65 series with industry standard output configurations provides a solution for most low power applications including many industrial applications. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25 °C unless otherwise stated OUTPUT SPECIFICATIONS EMC CHARACTERISTICS (continued) Total regulation Line and load Rise time At turn-on Transient response Main output 25% step at 0.1 A/µs ±100 mV 1.0 s, max. 5.0% or 250 mV max. dev., 1 ms max. recovery to 1% Temperature coefficient ±0.02%/°C Overvoltage protection 6.25 V ±0.5 V Short circuit protection Minimum output current Cyclic operation Yes, indefinite Single (See Note 6) Universal input 85-264 Vac 120-370 Vdc INPUT SPECIFICATIONS Input voltage range (See Note 1) Input frequency range 47-63 Hz Input surge current (cold start) 110 Vac 230 Vac Safety ground leakage current 110 Vac, 60 Hz 230 Vac, 50 Hz Inrush current 230 Vac Input current 110 230 110 230 Input fuse UL/IEC127 EMC CHARACTERISTICS Conducted emissions Radiated emissions ESD air ESD contact Surge Fast transients Vac, Vac, Vac, Vac, 17 A max. 32 A max. 0.7 mA 1.4 mA 32 A max. with PFC with PFC without PFC without PFC 1.05 0.51 1.40 0.80 A A A A rms rms rms rms 250 Vac S 3.15 A Radiated immunity Conducted immunity Surge Fast transients Radiated immunity Conducted immunity Level B Level A criteria 1 criteria 1 criteria 3 criteria 1 level level level level level level 3 3 2 3 3 3 Perf. Perf. Perf. Perf. Perf. Perf. criteria criteria criteria criteria criteria criteria 2 2 1 1 2 2 GENERAL SPECIFICATIONS Hold-up time 230 Vac, 50 Hz Efficiency Input/output Input/chassis Switching frequency Fixed Approvals and standards (See Notes 9 and 12) 3000 Vac 1500 Vac 100 kHz, ±5 kHz EN60950, UL1950, cUL equivalent of CSA C22.2 No. 950 Weight MTBF 78 ms @ 50 W 72% typical Isolation voltage 283 g (10 oz) MIL-HDBK-217F 150,000 hours min. ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Notes 1, 4 and 10) Operating temperature 0 °C to +50 °C Non-operating -40 °C to +85 °C 50 °C to 70 °C ambient, 1.65 W/°C convection cooled Peak (0 °C to +50 °C, 60 s) See table Relative humidity Non-condensing 5% to 95% RH Altitude Operating Non-operating 10,000 m max. 30,000 m max. Vibration (See Note 5) 5-500 Hz 2.4 G rms peak Shock per MIL-STD-810E (11,12) EN55022, FCC part 15 (Note 11) EN55022, FCC part 15 (Note 11) EN61000-4-2, level 3 Perf. EN61000-4-2, level 4 Perf. EN61000-4-5, level 3 Perf. EN61000-4-4, level 3 Perf. EN61000-4-3, EN61000-4-6, EN61000-4-5, EN61000-4-4, EN61000-4-3, EN61000-4-6, (11,12) 516.4 Part IV File Name: nlp65-3334.pdf Rev (02): 07 Nov 2005 NLP65-3334J Single output (adjustable) LOW POWER AC/DC POWER SUPPLIES 50 W AC/DC Universal Input Switch Mode Power Supplies 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT CURRENT OUTPUT VOLTAGE 4.5-5.5 V RIPPLE MAX (4) PEAK 10 A (2) FAN 12 A (3) (10) 11 A 50 mV N 1 9 3 4 5 6 7 8 When the input voltage is less than 90 Vac the operating temperature range is 0 °C to +40 °C. The ripple and regulation specifications may not be met. Peak output current lasting less than 60 seconds with duty cycle less than 5%. During peak loading, output voltage may exceed total regulation limits. Figure is peak-to-peak for convection power rating. Output noise measurements are made across a 20 MHz bandwidth using a 6 inch twisted pair, terminated with a 10 µF electrolytic capacitor and a 0.1 µF ceramic capacitor. Maximum continuous output power must not exceed 50 W. Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G rms 5 Hz to 500 Hz. Minimum load: 1 A. For optimum reliability, no part of the heatsink should exceed 120 ºC, and no semiconductor case temperature should exceed 130 ºC. CAUTION: Allow a minimum of 1 second after disconnecting line power when making thermal measurements. PIN Pin 1 Pin 2 Pin 3 Pin 1 INPUT CONNECTIONS J1 AC Line No Pin AC Neutral J2 Safety Ground OUTPUT PIN CONNECTIONS J3 TRIPLE Pin 1 +5V Pin 2 +5V Pin 3 +5V Pin 4 Return Pin 5 Return Pin 6 Return OVP (6) ±100 mV Notes 2 TOTAL REGULATION 10 11 12 13 14 MODEL NUMBER 6.25 V ± 0.5 V (13,14) NLP65-3334J This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. Maximum continuous output power for this model must not exceed 55 Watts with 20 CFM forced air cooling. For system EMI compliance the unit must be mounted within a metal chassis. All models require a minimum mounting stand-off of 0.25 inches (6.35 mm) in the end use product. The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. Input and output connectors Mating connectors AC (J1) connector type Molex 26-60-4030 type. AC (J1) mating connector type Molex 09-50-3031 or equivalent with Molex 08-50-0105 or equivalent crimp terminals. DC (J3) connector type Molex 26-60-4060 type. DC (J3) mating connector type Molex 09-50-3061 with Triurcon 6838 or equivalent crimp terminals. DERATING CURVE Output Power (Watts) 55W 50W 20 CFM FORCED AIR COOLING NATURAL CONVECTION COOLING 0°C 10°C 20°C 30°C 40°C 22W 17W 50°C 60°C 70°C File Name: nlp65-3334.pdf Rev (02): 07 Nov 2005 NLP65-3334J Single output (adjustable) LOW POWER AC/DC POWER SUPPLIES 50 W AC/DC Universal Input Switch Mode Power Supplies 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm 5.00 (127.00) 4.550 (115.57) 3 N 0.225 (5.715) 1 J1 L 1 J3 6 3.00 (76.20) 2.550 (64.770) T1 J2 C19 Mounting ALL DIMENSIONS IN INCHES (mm) Hole Diameter 0.156 (4.00) MAXIMUM COMPONENT HEIGHT 1.26 (32.00) TOLERANCE: .xxx .xx ± ± 0.005" 0.02" International Safety Standard Approvals VDE0805/EN60950/IEC950 File No. 1040100-3336-0096 Licence No. 114404 cUL, UL1950 File No. E136005 Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. www.artesyn.com File Name: nlp65-3334.pdf Rev (02): 07 Nov 2005