47 Watts LCT43-E Series Total Power: 47 Watts Input Voltage: 85-264 VAC 120-300 VDC # of Outputs: Triple Electrical Specs Input Input range 85-264 VAC 120-300 VDC 47-63 Hz <20 A peak @ 115 VAC; <40 A peak @ 230 VAC, cold start @ 25°C 1 A max. (RMS) @ 115 VAC 70% typical at full load FCC Class B conducted and radiated CISPR 22 Class B conducted and radiated EN55022 Class B conducted and radiated Bellcore GR-1089-core Class B conducted Frequency Inrush current Input current Efficiency EMI filter Special Features • • • • • • • Totally enclosed Universal input Quick Installation Built-in EMI filter Low output ripple Overvoltage protection Overload protection Safety ground leakage current Output Maximum power Cross regulation Hold-up time Overload protection Environmental Operating temperature: 0° to 50°C ambient; derate each output at 2.5% per degree from 50° to 70°C Overvoltage protection Electromagnetic susceptibility: designed to meet IEC 1000-4, -2, -3, -4, -5, -6, 8, 11 Level 3 Humidity: Operating; non-condensing 5% to 90% Vibration: .41 G from 3 to 500 Hz Spectral break points of .0065 G2/Hz at 10 Hz and 200 Hz and 5 db/octave roll off at each end, 2 hours per axis <3.5 mA @ 50/60 Hz, 264 VAC input 47 W with 12 CFM forced air ±2% on output 1; ±5% on outputs 2, 3 10 ms @ 47 W load, 100 VAC input Short circuit protection on all outputs. Case overload protected @ 110135% above peak rating 5.50-6.75 VDC on main output Safety VDE UL CSA CB CE 0805/EN60950 (IEC950) UL1950 CSA 22.2-234 -950-95-M90 Certificate and report Mark (LVD) 21310-3336-0003 E186249 6593 Storage temperature: -40° to 85°C Temperature coefficient: ±.04% per °C MTBF demonstrated: >300,000 hrs @ full load and 25°C ambient conditions rev 8.11.04 90 Technical Support: (888) 41-ASTEC or (407) 241-2752 Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662 AMERICAS EUROPE ASIA 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44(1384) 843-355 Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Model Number Output Voltage Minimum Load Maximum Load with Convection Cooling Maximum Load with 12 CFM Forced Air Peak Load1 Regulation2 Ripple P/P (PARD)3 LCT43-E +5 V +12 V -12 V 1.0 A 0.1 A 0A 4A 1A 0.5 A 7A 1.2 A 0.5 A 8A 1.5 A 0.6 A +4 / -2% ±5% ±5% 50 mV 120 mV 120 mV 1. 2. 3. 4. LCT43-E Series Ordering Information Peak current lasting <30 seconds with a maximum 10% duty cycle. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. Minimum Loads are required. Pin Assignments Connector LCT43-E SK1-1 SK1-2 SK1-3 AC Line Ground AC Neutral SK2-1 SK2-2 SK2-3 SK2-4 SK2-5 SK2-6 -12 V Com +5 V +5 V Com +12 V Mating Connectors AC Input: IEC 320 DC Outputs: Molex 15-48-0406 (USA) Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ±.02”. 3. Specifications are for convection rating at factory settings at 115 VAC input, 25°C unless otherwise stated. 4. Warranty: 1 year 5. Weight: 1.25 lb. / 0.57 kg www.astecpower.com 91