ADSL Magnetics Tioga • TM01364 Designed to comply with the requirements of GR1089, UL1950, EN60950, BABT and CSA950 to provide a supplementary insulation barrier with a working voltage of 250V • UL File Number E150991 • Footprint compatible with EP7 surface mount package • Minimum interwinding breakdown voltage of 1500 Vrms • Operating and storage temperature range: -40° to +85° C • Meets IEC 695, 2-2 flammability requirements • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias ELECTRICAL SPECIFICATIONS AT 25° C Turns Ratio ±2% Inductance1 µH ±10% Leakage Inductance3 µH max Chip : Line Line Side Line Side Chip Side Line Side 30 kHz +10 dBm on 100 Ω load on Line Side 1:1 280 1.5 3.4 3.4 85 Part Number S560-6611-09 DCR Ω max Harmonic Distortion2 dB max All measurements are made with pins 2 and 3 connected and pins 6 and 7 connected 1. Inductance measured at 10 kHz, 0.1 Vac 2. Measurements made with 100Ω source and 100Ω load impedance 3. Leakage inductance measured at 100 kHz, 0.1 Vac SCHEMATIC S560-6611-09 8 1 6 3 7 2 5 4 Chip Line ©2001 Bel Fuse Inc. Specifications subject to change without notice. 08.01 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 ADSL Magnetics Tioga TM01364 MECHANICAL Terminal Dimensions 0.339 [8.61] S560-6611-09 0.046 [1.17] 0.098 [2.50] 0.046 [1.17] 0.028 [0.71] 0.082 [2.08] Suggested PCB Pad Layout 0.460 [11.68] max 0.004 [0.10] 8 Edges 0.385 [9.78] max 0.460 [11.68] max Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. Tape and Reel Packaging 32 mm wide by 16 mm pitch; 13 inch OD, 4 inch ID 300 components per reel, maximum Meets ANSI/EIA 481-2 Carrier Tape Standards User Feed Direction Orientation of Component Inside Pocket ©2001 Bel Fuse Inc. Specifications subject to change without notice. 08.01 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2