FGM-3,FGM-6 Data sheet Sensing element/Gauge Features Applications . Very small surface mountable package, Easy to mount on PCB . Vacuum pressure measurable . Industrial instrumentation . Pressure switch, Pneumatic device . Non-corrosive liquid measurable(FGMC-3, FGMC-6 available) . Medical device . Turbo boost pressure measurement for Automotive system Part number for ordering FGM C - 3 07P G S R Terminal leads direction(See Outline Diagram) Rated pressure R: (PSI) Model Length of the pressure port FGM Terminal leads configuration 3 : 3mm S : Surface mount package Pressure type 6 : 6mm G : Gauge pressure Available pressure media No mark : Non-corrosive gas only C : Non-corrosive gas and liquid Pressure type Gauge pressure FGM-3 FGM-6 Surface mount package, 3mm pressure port Surface mount package, 6mm pressure port Model Package configuration Measurable pressure range (kPa) 13.79 13.79 34.47 34.47 48.26 48.26 98.07 103.4 98.07 206.8 98.07 344.7 98.07 482.6 98.07 827.4 Part number for ordering FGMC-302PGSR FGM-602PGSR FGMC-305PGSR FGM-605PGSR FGMC-307PGSR FGM-607PGSR FGMC-315PGSR FGM-615PGSR FGMC-330PGSR FGM-630PGSR FGMC-350PGSR FGM-650PGSR FGMC-370PGSR FGM-670PGSR FGMC-3120PGSR FGM-6120PGSR FGM-302PGSR FGM-305PGSR FGM-307PGSR FGM-315PGSR FGM-330PGSR FGM-350PGSR FGM-370PGSR FGM-3120PGSR FGMC-602PGSR FGMC-605PGSR FGMC-607PGSR FGMC-615PGSR FGMC-630PGSR FGMC-650PGSR FGMC-670PGSR FGMC-6120PGSR Specifications Model/Rated pressure 02PG 05PG 07PG 15PG 30PG 50PG 70PG Accuracy Recommended operating conditions Pressure type Gauge pressure 13.79 34.47 48.26 103.4 206.8 344.7 482.6 Rated pressure 0.141 0.352 0.492 1.055 2.109 3.516 4.922 13.79 34.47 48.26 98.07 98.07 98.07 98.07 Measurable pressure range 13.79 34.47 48.26 103.4 206.8 344.7 482.6 Pressure media FGM : Non-corrosive gas only, FGMC : Non-corrosive gas and liquid Excitation current (Constant) 1.5 Absolute maximum rating Maximum load pressure Twice of rated pressure Maximum excitation current 3 Operating temperature 20 100 Storage temperature 40 120 Operating humidity 30 80 (No dew condensation) Electric performances/characteristics (Excitation current I=1.5mA constant, Ambient temperature Ta=25 ) Full scale span voltage 60 140 Offset voltage 20 Bridge impedance 4000 6000 Mechanical response time 2 (For the reference) Temperature sensitivity of offset (TSO) 5 Temperature coefficient of sensitivity (TCS) 2.5 Linearity 0.5 0.3 0.5 Pressure hystersis 0.4 0.2 ) Please consult us available liquid pressure media when you chose the C models. 1 120PG Unit 827.4 8.437 98.07 827.4 kPa kg/cm2 kPa mADC 1.5times of rated pressure mADC RH mV mV 0.6 0.4 msec FS/0 50 FS/0 50 FS FS FGM-3,FGM-6 Data sheet Sensing element/Gauge Outline dimensions unit(mm) FGM-3 2.54 2.54 0.8 Pressure port 2 6 5 3 7 1 4 7 3 Vent hole 0.25 X. 15 0.8 6.5 3.5 0.15 3 Index MA 10.3 5 Recommended footprint for PCB 4 Labelled faceplate 1.7 1 2.54 2.54 1.4 6 1 2 9.4 Land-pads 3 unit(mm) unit(mm) FGM-6 2.54 2.54 0.8 Pressure port 2 6 5 3 7 1 4 7 Vent hole 3 0.5 Projections 5 4 2-R0.5 Recommended footprint for PCB 1.7 1 1 Projections 2 2- 1(Holes for projections) 2 3 Labelled faceplate Land-pads 6.2 6 2.54 2.54 10.3 1.4 0.8 MA 0.25 X. 15 3.5 9.5 6 Index 6.2 9.4 unit(mm) FGM-3,FGM-6 Data sheet Sensing element/Gauge Connection diagram unit(mm) FGM i 1.5mA 2 Output voltage R2 Constant current source R1 1 3 6 R3 R4 5 1 VR0 6 Zero balancing trimmer (VR0) is available. VR0 :200 Note ; Please read instruction “Notes” before using the sensor. Fujikura reserves the right to change specifications without notice. If you have any questions regarding technical issues or specifications, please contact us. Sensor Engineering Department 5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan Phone +81-(0)3-5606-1072 Fax. +81-(0)3-5606-1538 3 E-mail : [email protected]