5.0mm x 6.0mm FULL COLOR LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Part Number: AAF5060PBESURVGA BLUE HYPER RED GREEN Description OUTSTANDING MATERIAL EFFICIENCY. The Blue source color devices are made with InGaN on SiC RELIABLE AND RUGGED. Light Emitting Diode. WATER CLEAR LENS. The Hyper Red source color devices are made with DH LOW POWER CONSUMPTION. InGaAlP on GaAs substrate Light Emitting Diode. ONE BLUE, ONE RED AND ONE GREEN CHIPS IN The Green source color devices are made with InGaN on ONE PACKAGE. G-SiC Light Emitting Diode. CAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, Static electricity and surge damage the LEDS. INCLUDING WHITE LIGHT. It is recommended to use a wrist band or anti-electrostatic MOISTURE SENSITIVITY LEVEL : LEVEL 4. glove when handling the LEDs. All devices, equipment and machinery must be electrically RoHS COMPLIANT. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from package. 4. Specifications are subject to change without notice. SPEC NO: DSAG5859 REV NO: V.1 DATE: JUN/22/2006 PAGE: 1 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002376 Selection Guide Dice Part No. Iv (mcd) [2] @30mA *50mA Lens Type BLUE (InGaN) HYPER RED (InGaAIP) AAF5060PBESURVGA WATER CLEAR GREEN (InGaN) Min. Typ. 110 250 *380 *500 180 350 Viewing Angle [1] 2 θ 1/2 100° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. *Luminous intensity with asterisk is measured at 50mA; Luminous intensity / luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue Hyper Red Green λD [1] Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 465 640 520 nm IF=20mA Blue Hyper Red Green 470 628 525 nm IF=20mA Spectral Line Half-width Blue Hyper Red Green 25 27 35 nm IF=20mA C Capacitance Blue Hyper Red Green 110 45 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue Hyper Red Green 3.7 1.9 3.2 4.3 2.5 4.0 V IF=20mA IR Reverse Current Blue Hyper Red Green 10 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Power dissipation [1] Hyper Red Green 350 Units mW DC Forward Current 30 50 50 mA Peak Forward Current [2] 160 185 100 mA 5 5 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [3] 260°C For 3 Seconds Lead Solder Temperature [4] 260°C For 5 Seconds Notes: 1. Within 350mW at all chips are lightened. 2. 1/10 Duty Cycle, 0.1ms Pulse Width. 3. 2mm below package base. 4. 5mm below package base. SPEC NO: DSAG5859 REV NO: V.1 DATE: JUN/22/2006 PAGE: 2 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002376 AAF5060PBESURVGA Blue SPEC NO: DSAG5859 REV NO: V.1 DATE: JUN/22/2006 PAGE: 3 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002376 Hyper Red SPEC NO: DSAG5859 REV NO: V.1 DATE: JUN/22/2006 PAGE: 4 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002376 Green SPEC NO: DSAG5859 REV NO: V.1 DATE: JUN/22/2006 PAGE: 5 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002376 PACKING & LABEL SPECIFICATIONS AAF5060PBESURVGA SPEC NO: DSAG5859 REV NO: V.1 DATE: JUN/22/2006 PAGE: 6 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002376