2.0x1.25mm SMD CHIP LED LAMP APTC2012YC YELLOW Features Description !2.0mmx1.25mm SMT LED,0.75mm THICKNESS. The Yellow source color devices are made with !LOW Gallium Arsenide Phosphide on Gallium Phosphide POWER CONSUMPTION. ! WIDE VIEWING ANGLE. Yellow Light Emitting Diode. !IDEAL FOR BACKLIGHT AND INDICATOR. ! VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD0956 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE:MAR/22/2003 DRAWN: S.J.HOU PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e APTC2012YC Iv (m c d ) @ 20 m A L en s Ty p e YELLOW (GaAsP/GaP) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 2.6 8 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er λpeak Peak Wavelength Yellow λD Dominate Wavelength ∆λ1/2 D ev i c e Ty p . Un it s Tes t Co n d it io n s 590 nm I F =20mA Yellow 588 nm I F =20mA Spectral Line Half-width Yellow 35 nm I F =20mA pF VF=0V;f=1MHz 2.5 V I F =20mA 10 uA V R = 5V C Capacitance Yellow 20 VF Forward Voltage Yellow 2.1 IR Reverse Current Yellow Max . Absolute Maximum Ratings at T)=25°°C P ar am e t e r Yello w Un it s Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0956 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE:MAR/22/2003 DRAWN: S.J.HOU PAGE: 2 OF 4 Yellow APTC2012YC SPEC NO: DSAD0956 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE:MAR/22/2003 DRAWN: S.J.HOU PAGE: 3 OF 4 APTC2012YC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD0956 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE:MAR/22/2003 DRAWN: S.J.HOU PAGE: 4 OF 4