3.8x2.0mm DOME LENS SMD CHIP LED LAMP APED3820SYC SUPER BRIGHT YELLOW Features Description !3.8mmx2.0mm SMT LED,3.2mm THICKNESS. The Super Bright Yellow source color devices are !LOW made with DH InGaAlP on GaAs substrate Light POWER CONSUMPTION. !IDEAL FOR BACKLIGHT AND INDICATOR. ! VARIOUS COLORS AND LENS TYPES AVAILABLE. ! PACKAGE : 500PCS / REEL. Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAB0338 APPROVED : J. Lu REV NO: V.5 CHECKED :Allen Liu DATE:APR/04/2003 DRAWN: L.ZHANG PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e APED3820SYC Iv (m c d ) @ 20 m A L en s Ty p e SUPER BRIGHT YELLOW(InGaAIP) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ 1/2 110 250 60° (H) 35° (V) Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°°C Sy m b o l P ar am et er D ev i c e λpeak Peak Wavelength Super Bright Yellow λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un its Tes t Co n d it io n s 590 nm I F =20mA Super Bright Yellow 588 nm I F =20mA Spectral Line Half-width Super Bright Yellow 28 nm I F =20mA C Capacitance Super Bright Yellow 25 pF V F =0V;f=1MHz VF Forward Voltage Super Bright Yellow 2.0 2.5 V I F =20mA IR Reverse Current Super Bright Yellow 10 uA V R = 5V Absolute Maximum Ratings at TA=25°°C P ar am et er Su p er B r ig h t Yello w Un its Power dissipation 125 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB0338 APPROVED : J. Lu REV NO: V.5 CHECKED :Allen Liu DATE:APR/04/2003 DRAWN: L.ZHANG PAGE: 2 OF 4 Super Bright Yellow SPEC NO: DSAB0338 APPROVED : J. Lu APED3820SYC REV NO: V.5 CHECKED :Allen Liu DATE:APR/04/2003 DRAWN: L.ZHANG PAGE: 3 OF 4 APED3820SYC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAB0338 APPROVED : J. Lu REV NO: V.5 CHECKED :Allen Liu DATE:APR/04/2003 DRAWN: L.ZHANG PAGE: 4 OF 4