General Description This device contains three independent gates, each of which performs the logic AND function. Ordering Code: See Section 0 Commercial Military Package Package Description Number 74F11PC N14A 14-Lead (0.300" Wide) Molded Dual-In-Line J14A 14-Lead Ceramic Dual-In-Line 74F11SC (Note 1) M14A 14-Lead (0.150" Wide) Molded Small Outline, JEDEC 74F11SJ (Note 1) M14D 14-Lead (0.300" Wide) Molded Small Outline, EIAJ 54F11FM (Note 2) W14B 14-Lead Cerpack 54F11LM (Note 2) E20A 20-Lead Ceramic Leadless Chip Carrier, Type C 54F11DM (Note 2) 54F/74F11 54F/74F11 Triple 3-Input AND Gate 54F/74F11 Triple 3-Input AND Gate December 1994 DSXXX Note 1: Devices also available in 13" reel. Use suffix = SCX and SJX. Note 2: Military grade device with environmental and burn-in processing. Use suffix = DMQB, FMQB and LMQB. Logic Symbol IEEE/IEC DS009459-3 TRI-STATE ® is a registered trademark of National Semiconductor Corporation. © 1997 National Semiconductor Corporation www.national.com DS009459 PrintDate=1997/08/26 PrintTime=16:09:23 9520 ds009459 Rev. No. 1 cmserv Proof 1 1 Connection Diagrams Pin Assignment for DIP, SOIC and Flatpak Pin Assignment for LCC DS009459-2 DS009459-1 Unit Loading/Fan Out See Section 0 for U.L. definitions DSXXX 54F/74F Pin Names Description U.L. Input IIH/IIL HIGH/LOW Output IOH/IOL An, Bn, Cn Inputs 1.0/1.0 20 µA/−0.6 mA On Outputs 50/33.3 −1 mA/20 mA www.national.com PrintDate=1997/08/26 PrintTime=16:09:25 9520 ds009459 Rev. No. 1 2 cmserv Proof 2 Absolute Maximum Ratings Current Applied to Output in LOW State (Max) (Note 3) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Storage Temperature Ambient Temperature under Bias Junction Temperature under Bias Plastic VCC Pin Potential to Ground Pin Input Voltage (Note 4) Input Current (Note 4) Voltage Applied to Output in HIGH State (with VCC = 0V) Standard Output TRI-STATE ® Output −65˚C −55˚C −55˚C −55˚C to to to to twice the rated IOL (mA) Recommended Operating Conditions +150˚C +125˚C +175˚C +150˚C Free Air Ambient Temperature Military Commercial Supply Voltage Military Commercial −0.5V to +7.0V −0.5V to +7.0V −30 mA to +5.0 mA −55˚C to +125˚C 0˚C to +70˚C +4.5V to +5.5V +4.5V to +5.5V Note 3: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 4: Either voltage limit or current limit is sufficient to protect inputs. −0.5V to VCC −0.5V to +5.5V DC Electrical Characteristics Symbol Parameter 54F/74F Min Typ Units VCC Conditions Max VIH Input HIGH Voltage VIL Input LOW Voltage 0.8 V VCD Input Clamp Diode Voltage −1.2 V Min V Min V Min µA Max IOL = 20 mA IOL = 20 mA VIN = 2.7V µA Max VIN = 7.0V µA Max VOUT = VCC V 0.0 IID = 1.9 µA VOH VOL IIH IBVI ICEX VID 2.0 Output HIGH 54F 10% VCC 2.5 Voltage 74F 10% VCC 2.5 74F 5% VCC 2.7 V Output LOW 54F 10% VCC 0.5 Voltage 74F 10% VCC 0.5 Input HIGH 54F 20.0 Current 74F 5.0 Input HIGH Current 54F 100 Breakdown Test 74F 7.0 Output HIGH 54F 250 Leakage Current 74F 50 Input Leakage 74F 4.75 Recognized as a HIGH Signal Test IOD Output Leakage 74F Input LOW Current 3.75 µA 0.0 −0.6 mA Max All other pins grounded VIN = 0.5V IOS Output Short-Circuit Current −150 mA Max ICCH Power Supply Current 4.1 6.2 mA Max ICCL Power Supply Current 6.5 9.7 mA Max −60 IOH = −1 mA IOH = −1 mA IOH = −1 mA All other pins grounded VIOD = 150 mV Circuit Current IIL Recognized as a LOW Signal IIN = −18 mA VOUT = 0V VO = HIGH VO = LOW AC Electrical Characteristics See Section 0 for Waveforms and Load Configurations Symbol DSXXX 74F TA = +25˚C VCC = +5.0V Parameter 54F TA, VCC = Mil CL = 50 pF 74F TA, VCC = Com CL = 50 pF Fig. Units No. ns kk-kk CL = 50 pF Min Typ Max Min Max Min tPLH Propagation Delay 3.0 4.2 5.6 2.5 7.5 3.0 6.6 tPHL An, Bn, Cn to On 2.5 4.1 5.5 2.0 7.5 2.5 6.5 3 PrintDate=1997/08/26 PrintTime=16:09:27 9520 ds009459 Rev. No. 1 Max DSXXX Book Extract End www.national.com cmserv Proof 3 THIS PAGE IS IGNORED IN THE DATABOOK 4 PrintDate=1997/08/26 PrintTime=16:09:28 9520 ds009459 Rev. No. 1 cmserv Proof 4 Ordering Information The device number is used to form part of a simplified purchasing code where the package type and temperature range are defined as follows: DS009459-4 Physical Dimensions inches (millimeters) unless otherwise noted 20-Lead Ceramic Leadless Chip Carrier (L) NS Package Number E20A 5 PrintDate=1997/08/26 PrintTime=16:09:28 9520 ds009459 Rev. No. 1 www.national.com cmserv Proof 5 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Ceramic Dual-In-Line Package (D) NS Package Number J14A 14-Lead (0.150" Wide) Molded Small Outline, JEDEC (S) NS Package Number M14A www.national.com PrintDate=1997/08/26 PrintTime=16:09:29 9520 ds009459 Rev. No. 1 6 cmserv Proof 6 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead (0.300" Wide) Molded Small Outline, EIAJ (SJ) NS Package Number M14D 14-Lead (0.300" Wide) Molded Dual-In-Line Package (P) NS Package Number N14A 7 PrintDate=1997/08/26 PrintTime=16:09:30 9520 ds009459 Rev. No. 1 www.national.com cmserv Proof 7 7 54F/74F11 Triple 3-Input AND Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Ceramic Flatpak (F) NS Package Number W14B LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into sonably expected to cause the failure of the life support the body, or (b) support or sustain life, and whose faildevice or system, or to affect its safety or effectiveness. ure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: [email protected] www.national.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: [email protected] Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Français Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. PrintDate=1997/08/26 PrintTime=16:09:31 9520 ds009459 Rev. No. 1 cmserv Proof 8