QP-1000 1000W Quad Output Power Supply Features : ry Universal AC input / Full range AC input active surge current limiting Built-in active PFC function, PF>0.95 na Protections: Short circuit / Overload / Over voltage/Over temperature Forced air cooling by built-in DC Fan Built-in remote ON-OFF function for CH3,CH4 and the whole unit Isolate output Built-in remote sense function(CH3,CH4) Built-in external voltage control function(CH3,CH4) Built-in output current monitor signal(CH3,CH4) SPECIFICATION MODEL QP-1000 OUTPUT NUMBER CH1 CH2 CH3 DC VOLTAGE 12V 5V 24V 24V RATED CURRENT 8.4A 6A 12.5A 25A CURRENT RANGE 0 ~ 8.4A 0 ~ 6A 0 ~ 12.5A 0 ~ 25A 300W 600W 80mVp-p 100mVp-p 200mVp-p 4.5 ~ 5.5V 21.5 ~ 26.5V 21.5 ~ 26.5V RATED POWER (convection) 1000W(max.) RIPPLE & NOISE (max.) Note.2 120mVp-p 10.8 ~ 13.2V VOLTAGE ADJ. RANGE mi OUTPUT 130.8W(max.) CH4 REMOTE PROGRAMMING (PV) CH3,CH4 10% ~ 120% adjustable by 0.5 ~ 6VDC external control VOLTAGE TOLERANCE Note.3 2.0% 2.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 1.0% 1500ms, 50ms/230VAC SETUP, RISE TIME 16ms/230VAC HOLD UP TIME (Typ.) VOLTAGE RANGE 16ms/115VAC at full load 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR EFFICIENCY(Typ.) PF 0.95/230VAC 86% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 12A/115VAC 6A/230VAC COLD START 25A/115VAC LEAKAGE CURRENT <2mA / 240VAC PF 0.97/115VAC at full load 40A/230VAC eli INPUT Note.5 90 ~ 264VAC 1500ms, 50ms/115VAC at full load OVERLOAD 105 ~ 135% rated output power CH1, CH2 : Protection type : Shut down o/p voltage, re-power on to recover CH3, CH4 : Protection type : Constant current limiting, unit will shut down after 3 sec., re-power on to recover PROTECTION OVER VOLTAGE OVER TEMPERATURE REMOTE CONTROL TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE EMC (Note 4) OTHERS NOTE 30 ~ 34.8V 30~ 34.8V Protection type : Shut down o/p voltage, recovers automatically after temperature goes down Turn ON/OFF CH3,CH4 and the whole power supply RC+/RC-: Short , Power ON ; RC+/RC-: Open , Power OFF Signal provides an output of 0 ~ 5V which applies over 10 ~ 100% of rated load. CURRENT MONITOR OUTPUT VOLTAGE EXTERNAL CONTROL Please see the Function Manual -20 ~ +70 (Refer to output load derating curve) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY SAFETY & 5.75 ~ 6.75V Protection type : Shut down o/p voltage, re-power on to recover 75 5 detect on heatsink of power transistors Pr FUNCTION 13.8 ~ 16.2V -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 45 ) 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes Design refer to UL60950-1,TUV EN60950-1 I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC / 25 / 70% RH ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61000-6-2, EN61204-3 MTBF K hrs min. MIL-HDBK-217F (25 278*177.8*63.5mm (L*W*H) Kg DIMENSION PACKING ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Derating may be needed under low input voltage. Please check the derating curve for more details. File Name:QP-1000-SPEC 2008-12-05 QP-1000 1000W Quad Output Power Supply Mechanical Specification Unit:mm ry Case No. 278 245 8-M4(Both Sides) L=8mm 63.5 38 12.5 18 18 Pin No. 1 2 3 1 2 3 8 ADJ LED 4 5 6 ADJ2 ADJ1 LED LED + 1 7 2 8 ADJ LED 2 3 TB1 1 CN1 10 9 8 7 24 + + 13 13 mi AC Input Terminal Pin No. Assignment (TB1) 7 TB2 CN2 1 2 + CN3 10 Air flow direction 13max. 9 162 4-M4 L=5mm 11 7.9 na 245 16max. DC Output Terminal Pin No. Assignment (TB2) Assignment FG AC/N AC/L Pin No. 1,2 3,4 5 6 Assignment +V4 -V4 +V1 -V1 Pin No. 7 8 9 10 Assignment -V2 +V2 +V3 -V3 Control Pin No. Assignment(CN1) for CH3: HRS DF11-8DP-2DS or equivalent 1 2 3 4 Assignment +S -S +RC PS Pin No. 5 6 7,8 Assignment PV Im G Mating Housing Terminal HRS DF11-8DS or equivalent HRS DF11-**SC or equivalent eli Pin No. +S : +Remote Sensing PV : Voltage Control -S : -Remote Sensing Im : Output Current Monitor +RC : +Remote OF/OFF G : GND PS : Reference Voltage Terminal Control Pin No. Assignment(CN2): HRS DF11-4DP-2DS or equivalent Pin No. 1 2 3,4 Assignment VCC +RC COM Mating Housing Terminal HRS DF11-4DS or equivalent HRS DF11-**SC or equivalent Pr +RC : +Remote OF/OFF VCC : 12V/0.1A auxiliary output for remote control Control Pin No. Assignment(CN3) for CH4: HRS DF11-8DP-2DS or equivalent Pin No. 1 2 3 4 Assignment +S -S +RC PS Pin No. 5 6 7,8 Assignment PV Im G Mating Housing Terminal HRS DF11-8DS or equivalent HRS DF11-**SC or equivalent +S : +Remote Sensing PV : Voltage Control -S : -Remote Sensing Im : Output Current Monitor +RC : +Remote OF/OFF G : GND PS : Reference Voltage Terminal File Name:QP-1000-SPEC 2008-12-05 QP-1000 1000W Quad Output Power Supply ry Block Diagram REMOTE CONTROL FAN AUX POWER RECTIFIERS & FILTER RECTIFIERS & PFC I/P REMOTE CONTROL RECTIFIERS & FILTER POWER SWITCHING O.T.P Aux Power 12V/0.1A +S +V3 -V3 -S DETECTION CIRCUIT PWM CONTROL PFC CONTROL FG RECTIFIERS & FILTER POWER SWITCHING na EMI FILTER RC RC(V3) +S O.V.P. O.L.P. PWM CONTROL mi DETECTION CIRCUIT eli 100 80 50 40 20 -20 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 (HORIZONTAL) O.L.P. RECTIFIERS & FILTER +V1 RECTIFIERS & FILTER +V2 -V1 -V2 O.V.P. O.V.P. Output Derating VS Input Voltage Ta=25 100 90 80 70 LOAD (%) LOAD (%) Pr 60 RC(V4) O.V.P. MA & CONTROL PWM CONTROL Derating Curve -S REMOTE CONTROL MA & CONTROL POWER SWITCHING O.L.P. +V4 -V4 60 50 40 90 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:QP-1000-SPEC 2008-12-05 QP-1000 Quad Output Power Supply ry Function Manual 1.Remote ON/OFF The PSU by using the "Remote ON/OFF" function A. For CH3 (CN1) or CH4 (CN3) SW +RC G Output Status SW ON (Short) ON SW OFF (Open) OFF na Between +RC(pin3) and G(pin7,8) B. For CH1 ~ CH4 (CN2) SW +RC COM Between +RC(pin1) and COM(pin2,4) ON SW OFF (Open) mi SW ON (Short) Output Status OFF 2.External Voltage Control by CH3,CH4 Vout 120 +S LOAD 80 Non-Linear -S PV 1~6V Pr -S 60 40 20 1 2 3 4 5 EXTERNAL VOLTAGE (DC) 6 V OUTPUT CURRENT (%) -V eli -V 100 100 +V OUTPUT VOLTAGE (%) +V 80 60 40 20 20 40 60 80 100 120 V OUTPUT VOLTAGE (%) File Name:QP-1000-SPEC 2008-12-05