RSP-200 200W Single Output with PFC Function series ¡½ Features : ¡EUniversal AC input / Full range ¡ Built-in active PFC function, PF>0.95 E ¡ High efficiency up to 90% E ¡ Protections: Short circuit / Overload / Over voltage / Over temperature E ¡ Cooling by free air convection E ¡ 1U low profile 30mm E ¡ Optional conformal coating models (RSP-200-¡¼CC) E ¡ LED indicator for power on E ¡ 3 years warranty E SPECIFICATION MODEL RSP-200-2.5 RSP-200-3.3 RSP-200-4 RSP-200-5 RSP-200-7.5 RSP-200-12 DC VOLTAGE 2.5V 3.3V 4V 5V 7.5V 12V RATED CURRENT 40A 40A 40A 40A 26.7A 16.7A CURRENT RANGE 0 ~ 40A 0 ~ 40A 0 ~ 40A 0 ~ 40A 0 ~ 26.7A 0 ~ 16.7A RATED POWER 100W 132W 160W 200W 200.25W 200.4W 100mVp-p 100mVp-p 150mVp-p 150mVp-p 150mVp-p 2.97 ~ 3.8V 3.7 ~ 4.3V 4.5 ~ 5.5V 6 ~ 9V 10 ~ 13.2V VOLTAGE TOLERANCE Note.3 ¡Ó2.0% ¡Ó2.0% ¡Ó2.0% ¡Ó2.0% ¡Ó2.0% ¡Ó1.0% LINE REGULATION ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.3% LOAD REGULATION ¡Ó1.5% ¡Ó1.5% ¡Ó1.0% ¡Ó1.0% ¡Ó1.0% ¡Ó0.5% SETUP, RISE TIME 1500ms, 50ms/230VAC HOLD UP TIME (Typ.) 8ms at full load RIPPLE & NOISE (max.) Note.2 100mVp-p OUTPUT VOLTAGE ADJ. RANGE 2.35 ~ 2.85V 230VAC /115VAC VOLTAGE RANGE Note.4 88 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz INPUT 124 ~ 370VDC POWER FACTOR (Typ.) PF>0.95/230VAC EFFICIENCY (Typ.) 81.5% 2A/115VAC AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. 20A/115VAC 3000ms, 50ms/115VAC at full load PF>0.98/115VAC at full load 84% 1.1A/230VAC 85.5% 87% 3.5A/115VAC 89% 1.7A/230VAC 89% 40A/230VAC <1mA / 240VAC 105 ~ 135% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 2.88 ~ 3.5V 3.8 ~ 4.62V 4.5 ~ 5.6V 5.75 ~ 7V 9.4 ~ 10.9V 13.8 ~ 16.2V Protection type : Shut down o/p voltage, re-power on to recover 110¢J ¡Ó5¢J(TSW1) detect on heatsink of main power output choke Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -30 ~ +70¢J (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85¢J, 10 ~ 95% RH TEMP. COEFFICIENT ¡Ó0.03%/¢J (0 ~ 45¢J) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 5) EMC EMISSION OTHERS NOTE UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25¢J/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF 224.5K hrs min. DIMENSION 215*115*30mm (L*W*H) PACKING 0.72Kg; 15pcs/11.8Kg/0.78CUFT MIL-HDBK-217F (25¢J) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¢J of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the derating curve for more details. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:RSP-200-SPEC 2012-12-28 RSP-200 200W Single Output with PFC Function series ¡½ Features : ¡EUniversal AC input / Full range ¡ Built-in active PFC function, PF>0.95 E ¡ High efficiency up to 90% E ¡ Protections: Short circuit / Overload / Over voltage / Over temperature E ¡ Cooling by free air convection E ¡ 1U low profile 30mm E ¡ Optional conformal coating models (RSP-200-¡¼CC) E ¡ LED indicator for power on E ¡ 3 years warranty E SPECIFICATION MODEL RSP-200-13.5 RSP-200-15 RSP-200-24 RSP-200-27 RSP-200-36 RSP-200-48 DC VOLTAGE 13.5V 15V 24V 27V 36V 48V RATED CURRENT 14.9A 13.4A 8.4A 7.5A 5.56A 4.2A CURRENT RANGE 0 ~ 14.9A 0 ~ 13.4A 0 ~ 8.4A 0 ~ 7.5A 0 ~ 5.56A 0 ~ 4.2A RATED POWER 201.15W 201W 201.6W 202.5W 200.16W 201.6W 150mVp-p 150mVp-p 200mVp-p 220mVp-p 240mVp-p 13.5 ~ 18V 20 ~ 26.4V 26 ~ 31.5V 32.4 ~ 39.6V 41 ~ 56V VOLTAGE TOLERANCE Note.3 ¡Ó1.0% ¡Ó1.0% ¡Ó1.0% ¡Ó1.0% ¡Ó1.0% ¡Ó1.0% LINE REGULATION ¡Ó0.3% ¡Ó0.3% ¡Ó0.2% ¡Ó0.2% ¡Ó0.2% ¡Ó0.2% LOAD REGULATION ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% SETUP, RISE TIME 1500ms, 50ms/230VAC HOLD UP TIME (Typ.) 8ms at full load 90% 90% RIPPLE & NOISE (max.) Note.2 150mVp-p OUTPUT VOLTAGE ADJ. RANGE 12 ~ 15V 230VAC /115VAC VOLTAGE RANGE Note.4 88 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz INPUT 3000ms, 50ms/115VAC at full load 124 ~ 370VDC POWER FACTOR (Typ.) PF>0.95/230VAC EFFICIENCY (Typ.) 89% 3.5A/115VAC 89.5% 1.7A/230VAC 20A/115VAC 40A/230VAC AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. PF>0.98/115VAC at full load 89.5% 89% <1mA / 240VAC 105 ~ 135% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 15.7 ~ 18.4V 18.8 ~ 21.8V 27.6 ~ 32.4V 32.9 ~ 38.3V 41.4 ~ 48.6V 58.4 ~ 68V Protection type : Shut down o/p voltage, re-power on to recover 110¢J ¡Ó5¢J(13.5V,15V), 100¢J ¡Ó5¢J(24V ~ 48V)(TSW1) detect on heatsink of main power output choke Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -30 ~ +70¢J (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85¢J, 10 ~ 95% RH TEMP. COEFFICIENT ¡Ó0.03%/¢J (0 ~ 45¢J) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 5) EMC EMISSION OTHERS NOTE UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25¢J/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF 224.5K hrs min. DIMENSION 215*115*30mm (L*W*H) PACKING 0.72Kg; 15pcs/11.8Kg/0.78CUFT MIL-HDBK-217F (25¢J) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¢J of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the derating curve for more details. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:RSP-200-SPEC 2012-12-28 RUSSPP--2320205 200W Single Output with PFC Function Mechanical Specification Case No.207B ssee rr iieess Unit:mm 215 32.5 150 LED +V ADJ. 9 8 50 115 9.5 135 4-M4 L=5mm 7 6 5 4 32.5 8 3 2 16 1 15 32.5 150 Terminal Pin No. Assignment : 12.5 30 Pin No. 1 2 3 Pin No. Assignment 4~6 DC OUTPUT -V 7~9 DC OUTPUT +V Assignment AC/L AC/N FG 4-M4(Both Sides) L=5mm Block Diagram PFC fosc : 100KHz PWM fosc : 100KHz ACTIVE INRUSH CURRENT LIMITING EMI FILTER I/P RECTIFIERS FG O.L.P. RECTIFIERS & FILTER POWER SWITCHING DETECTION CIRCUIT PWM & PFC CONTROL O.V.P. O.T.P. Derating Curve Static Characteristics 100 100 2.5V~4V 90 80 80 70 5V~48V LOAD (%) LOAD (%) 60 40 20 -30 +V -V 60 50 40 0 10 20 30 40 45 50 AMBIENT TEMPERATURE (¢J) 60 70 (HORIZONTAL) 88 90 95 100 115 135 155 175 195 230 264 INPUT VOLTAGE (VAC) 60Hz File Name:RSP-200-SPEC 2012-12-28