75 Ohm SMC Jack Connector Clamp/Solder Attachment For RG179, RG187 TECHNICAL DATA SHEET PE4929 75 Ohm SMC Jack Connector Clamp/Solder Attachment For RG179, RG187 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style SMC Jack RG179,RG187 Clamp/Solder Straight Electrical Specifications Impedance, Ohms 75 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 0.71 [18.03] 0.344 [8.74] Weight, lbs [g] 0.013 [5.9] Connector Type Contact Material and Plating Body Material and Plating Dielectric Type SMC Jack Gold Brass, Nickel PTFE . Compliance Certifications (visit www.Pasternack.com for current document) Plotted and Other Data Notes: Values at 25 °C, sea level 75 Ohm SMC Jack Connector Clamp/Solder Attachment For RG179, RG187 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm SMC Jack Connector Clamp/Solder Attachment For RG179, RG187 PE4929 URL: http://www.pasternack.com/smc-jack-standard-rg179-rg187-connector-pe4929-p.aspx PE4929 REV 01 1 © 2013 Pasternack Enterprises All Rights Reserved PE4929 REV 01 SLIDE CLAMP NUT (1) OVER CABLE AS SHOWN IN A. SLIDE COMPRESSION WASHER (2) OVER BRAID & SEAT AGAINST JACKET. FLAIR BRAID OVER COMPRESSION WASHER (2). SLIDE BRAID CLAMP (3) OVER DIELECTRIC & UNDER BRAID. PUSH INTO WASHER UNTIL IT STOPS. STRIP CABLE AS SHOWN IN B. TRIM EXCESS BRAID FLUSH WITH SURFACE SOLDER CONTACT (5) TO CENTER CONDUCTOR. INSERT CABLE ASSEMBLY INTO BODY & TIGHTEN. 1. 2. 3. ASSEMBLY PROCEDURES FSCM NO. 53919 PE4929 DWG TITLE CAD FILE 061402 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. 75 Ohm SMC Jack Connector Clamp/Solder Attachment For RG179, RG187 PE4929 CAD Drawing 2