N Male Connector Clamp/Solder Attachment For 7/8 inch Helical TECHNICAL DATA SHEET PE44553 N Male Connector Clamp/Solder Attachment For 7/8 inch Helical Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style N Male 7/8 inch Helical Clamp/Solder Straight Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 2.49 [63.25] 1.355 [34.42] Connector Type Contact Material and Plating Coupling Nut Material and Plating Hex Size, in. Body Material and Plating Dielectric Type N Male Silver Brass, Tri-Metal 13/16 Brass, Tri-Metal PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level N Male Connector Clamp/Solder Attachment For 7/8 inch Helical from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: N Male Connector Clamp/Solder Attachment For 7/8 inch Helical PE44553 URL: http://www.pasternack.com/n-male-standard-7-8-inch-helical-connector-pe44553-p.aspx PE44553 REV 01 1 ASSEMBLY PROCEDURES © 2013 Pasternack Enterprises All Rights Reserved PE44553 REV 01 HOLD CLAMP NUT STEADY & SCREW BODY TIGHTLY ONTO CABLE. CENTER CONDUCTOR WILL PROPERLY SEAT INSIDE THE CABLE CENTER CONDUCTOR. SLIDE O-RING OVER THREAD AND SEAT INTO PLACE. GREASE O-RING. INSTALL CLAMP NUT ONTO CABLE. FLAIR OUT INNER & OUTER CONDUCTOR. DEBURR INNER & OUTER CONDUCTOR. STRIP CABLE AS SHOWN. SLIDE LARGE O-RING ONTO CABLE AND SEAT AGAINST THE JACKET. GREASE O-RING. FSCM NO. 53919 PE44553 DWG TITLE CAD FILE 081208 SCALE N/A SIZE A 147 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. N Male Connector Clamp/Solder Attachment For 7/8 inch Helical PE44553 CAD Drawing 2