N Male Right Angle Connector Clamp/Solder Attachment For 1/2 inch Helical TECHNICAL DATA SHEET PE44554 N Male Right Angle Connector Clamp/Solder Attachment For 1/2 inch Helical Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style N Male 1/2 inch Helical Clamp/Solder Right Angle Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 2.77 [70.36] 0.75 [19.05] 1.725 [43.82] Weight, lbs [Kg] 6.9 [3.13] Connector Type Contact Material and Plating Coupling Nut Material and Plating Hex Size, in. Torque, in-lbs [Nm] Body Material and Plating Dielectric Type N Male Gold Brass, Tri-Metal 3/4 12 [1.36] Brass, Tri-Metal PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level N Male Right Angle Connector Clamp/Solder Attachment For 1/2 inch Helical from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: N Male Right Angle Connector Clamp/Solder Attachment For 1/2 inch Helical PE44554 URL: http://www.pasternack.com/n-male-standard-1-2-inch-helical-connector-pe44554-p.aspx PE44554 REV 01 1 © 2013 Pasternack Enterprises All Rights Reserved SCREW CLAMP NUT ONTO CABLE UNTIL EDGES OF NUT & OUTER CONDUCTOR ARE FLAT. SLIDE O-RING OVER THREAD AND SEAT INTO PLACE. GREASE O-RING. HOLD CLAMP NUT STEADY & SCREW BODY TIGHTLY ONTO CABLE. 4. 5. PUT THE SCREW GASKET ONTO CABLE, PAY ATTENTION TO THE CORRECT DIRECTION OF THE SCREW GASKET (ANGLE DIRECTION TOWARDS THE FRONT). WIPE THE GASKET WITH GREASE. 2. 3. STRIP CABLE AS SHOWN, CHAMFER CENTER CONDUCTOR & DEBURR CABLE. 1. ASSEMBLY PROCEDURES PE44554 REV 01 FSCM NO. 53919 PE44554 DWG TITLE CAD FILE 081308 SCALE N/A SIZE A 147 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. N Male Right Angle Connector Clamp/Solder Attachment For 1/2 inch Helical PE44554 CAD Drawing 2