75 Ohm BNC Female Connector Clamp/ Solder Attachment For RG179, RG187 TECHNICAL DATA SHEET PE4615 75 Ohm BNC Female Connector Clamp/Solder Attachment For RG179, RG187 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style BNC Female RG179,RG187 Clamp/Solder Straight Electrical Specifications Impedance, Ohms 75 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 1.13 [28.7] 0.57 [14.48] Weight, lbs [g] 0.048 [21.77] Connector Type Contact Material and Plating Body Material and Plating BNC Female Silver Brass, Nickel . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level 75 Ohm BNC Female Connector Clamp/Solder Attachment For RG179, RG187 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm BNC Female Connector Clamp/Solder Attachment For RG179, RG187 PE4615 URL: http://www.pasternack.com/bnc-female-standard-rg179-rg187-connector-pe4615-p.aspx PE4615 REV 1 SLIDE CLAMP NUT (1), WASHER (2) & GASKET (3) OVER CABLE. STRIP CABLE AS SHOWN. DO NOT NICK BRAID WHILE CUTTING JACKET. TAPER END OF BRAID TO PERMIT ASSEMBLY OF BRAID CLAMP BRAID & SEAT AGAINST CABLE. (4). SLIDE BRAID CLAMP (4) OVER FORM BRAID OVER CLAMP NUT (4). TRIM BRAID BACK TO SHOULDER. CUT DIELECTRIC & CENTER CONDUCTOR TO DIMENSION SHOWN. DO NOT NICK CENTER CONDUCTOR. SLIDE COMPRESSION WASHER (5) OVER THE DIELECTRIC. SLIDE PTFE (6) OVER DIELECTRIC & RESTING AGAINST COMPRESSION WASHER (5). SOLDER CONTACT TO CENTER CONDUCTOR. REMOVE EXCESS SOLDER. DO NOT OVER HEAT DIELECTRIC. INSERT CABLE ASSEMBLY INTO BODY & TIGHTEN. 1. 2. ASSEMBLY PROCEDURES © 2013 Pasternack Enterprises All Rights Reserved PE4615 REV FSCM NO. 53919 PE4615 DWG TITLE CAD FILE 090408-A SCALE N/A SIZE A XXXX NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. 75 Ohm BNC Female Connector Clamp/Solder Attachment For RG179, RG187 PE4615 CAD Drawing 2