SMC Jack Bulkhead Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4365 SMC Jack Bulkhead Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Specification Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style Mount Method SMC Jack MIL-C-39012 RG178,RG196 Crimp/Solder Straight Bulkhead Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Temperature Operating Range, deg C -65 to +165 Size Length, in [mm] Width/Dia., in [mm] 1.21 [30.73] 0.25 [6.35] Weight, lbs [g] 0.006 [2.72] Connector Type Contact Material and Plating Contact Plating Specification Body Material and Plating Dielectric Type SMC Jack Gold MIL-G-45204 Brass, Nickel Teflon . Compliance Certifications (visit www.Pasternack.com for current document) Plotted and Other Data Notes: Values at 25 °C, sea level SMC Jack Bulkhead Connector Crimp/Solder Attachment For RG178, RG196 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMC Jack Bulkhead Connector Crimp/Solder Attachment For RG178, RG196 PE4365 URL: http://www.pasternack.com/smc-jack-standard-rg178-rg196-connector-pe4365-p.aspx PE4365 REV 1 © 2013 Pasternack Enterprises All Rights Reserved PE4365 REV FERRULE: .128" HEX CRIMP TOOL 4. INSERT ASSEMBLY 1 & 2 INTO CONNECTOR BODY (3) AND TIGHTEN. CRIMP FERRULE (1) TO CABLE. 3. SOLDER CENTER CONDUCTOR TO CONTACT (2). THRU HOLE IN CONTACT. 2. FLAIR BRAID INSERT EXTENSION (2)OVER DIELECTRIC AND UNDER BRAID UNTIL IT STOPS. SLIDE FERRULE (1) OVER BRAID AND BUTT AGAINST EXTENSION (2). 1. SLIDE FERRULE (1) OVER CABLE. STRIP CABLE AS SHOWN. ASSEMBLY PROCEDURES REV. A CAD FILE 091008 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4365 DWG TITLE SMC Jack Bulkhead Connector Crimp/Solder Attachment For RG178, RG196 PE4365 CAD Drawing 2