ECO-PACTM 2 PSBM 24/05 Power MOSFET Stage ID25 VDSS RDS(on) for Boost Converters Module for Power Factor Correction K Preliminary Data Sheet GH CM L = 35 A = 500 V = 0.12 Ω VX VRSM VRRM Type (V) (V) 600 500 PSBM 24/05 1 MOSFET Symbol Test Conditions VDSS VDGR VGS ID ID IDM PD IS ISM TVJ = 25 °C to 150 °C Maximum Ratings 500 V TVJ = 25 °C to 150 °C, RGS = 10 Ω 500 V continuous ±20 V TS = 85 °C 24 A TS = 25 °C 35 A Symbol Test Conditions TS = 25 °C, pulse width limited by TVJ 95 A 170 W VGS = 0 V, TS = 25 °C 24 A VGS = 0 V, TS = 25 °C, pulse width limited by TVJ 95 A TS = 85 °C Characteristic Values TVJ = 25 °C, unless otherwise specified VDSS VGS(th) VGS(th) IGSS IDSS RDS(on) RGint gfs VDS td(on) td(off) Ciss Coss Crss Qg RthJH Symbol TVJ TJM Tstg Visol Md Weight Features • • • • • High level of integration - only one power semiconductor module required for the whole PFC rectifier Isolation voltage 3600 V∼ Planar glass passivated chips Ultrafast boost diode VGS = 0 V, ID = 2mA min. 500 V VDS = 20 V, ID = 20 mA min. 2 V VDS = 20 V, ID = 20 mA max. 5 V VGS = ±20 V, VDS = 0 V max. ±500 nA VDS = 500 V, VGS = 0 V max. 2 mA TVJ = 25 °C max. 0.12 Ω TVJ = 25 °C max. 1.5 Ω VDS = 15 V, IDS = 12 A typ. 30 S IDS = 24 V, VGS = 0 V max. 1.5 V VDS = 250 V, IDS = 12 A, VGS = 10 V max. 100 ns max. 220 ns typ. 8.5 nF typ. 0.9 nF typ. 0.3 nF Advantages VDS = 250 V, ID = 12 A, VGS = 10 V typ. 350 nC 0.38 K/W • • • } Zgen. = 1 Ω, L-load } Module 2 NTC optional VDS = 25 V, f = 1 MHz, VGS = 0 V max. Test Conditions Maximum Ratings -40...+150 °C 150 °C -40...+150 °C V∼ 50/60 Hz t = 1 min 3000 Iisol ≤ 1 mA t=1s 3600 V∼ 1.5-2.0 Nm 24 g Mounting torque (M 4) typ. • • Leads suitable for PC board soldering Thermistor (optional) UL registered, E 148688 Applications • • Power factor pre-conditioner for SMPS, UPS, battery chargers and inverters Boost topology for SMPS including • 1∼ rectifier bridge Power supply for welding equipment • • Easy to mount with two screws Space and weight savings high temperature and power cycling capability Small and light weight 3 functions in one package Caution: These Devices are sensitive to electrostatic discharge. Users should observe proper ESD handling precautions. Data according to IEC 60747 refer to a single diode unless otherwise stated 2002 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-PACTM 2 Boost Diode Symbol VRRM IFAV IFSM Test Conditions Maximum Ratings TS = 85 °C, rectangular δ =0.5 TVJ = 45 °C, T = 10 ms (50Hz) 600 V 40 A 300 A T = 8.3 ms (60Hz) 320 A TVJ = 150 °C, T = 10 ms (50Hz) 260 A T = 8.3 ms (60Hz) 280 A 36 W P TS = 85 °C Symbol Test Conditions Package style and outline Dimensions in mm (1mm = 0.0394“) Characteristic Values TVJ = 25 °C, unless otherwise specified VF IR IF = 22 A, TVJ = 25 °C max. 1.65 V TVJ = 150 °C max. 1.4 V TVJ = 25 °C max. 1.5 mA TVJ = 25 °C max. 0.25 mA TVJ = 125 °C max. 7 mA for power-loss calculations only max. 1.14 V TVJ = 125 °C max. 10 mΩ IF = 30 A, -diF/dt = 240 A/µs max. 11 A VR = 350 V, TVJ = 100 °C typ. 10 A max. 1.8 K/W VR = 600 V, VR = 480 V, VT0 rT IRM } RthJH Rectifier Diodes Symbol VRRM IdAV IFSM Test Conditions Maximum Ratings 800 TS = 85 °C, sinus 180 ° V 40 A T = 10 ms (50Hz) 300 A T = 8.3 ms (60Hz) 320 A TVJ = 150 °C, T = 10 ms (50Hz) 260 A T = 8.3 ms (60Hz) 280 A 33 W TVJ = 45 °C, P TS = 85 °C Symbol Test Conditions Characteristic Values TVJ = 25 °C, unless otherwise specified VF IF = 20 A, IR VR = 800 V, VR = 640 V, VT0 rT RthJH Module TVJ = 25 °C max. TVJ = 125 °C max. 1.4 V TVJ = 25 °C max. 0.25 mA TVJ = 125 °C max. 2 mA for power-loss calculations only max. 1.05 V TVJ = 125 °C max. 16 mΩ max. 2.0 K/W Symbol Test Conditions ds dA a R25* Creeping distance on surface Creeping distance in air Max. allowable acceleration NTC @ 25 °C 1.4 V Characteristic Values 11.2 5.6 50 470.000 mm mm m/s² Ω *NTC will be changed in future to 5.000 Ω. 2002 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20