ECO-PACTM 2 CoolMOS Power MOSFET ID25 VDSS RDSon PSMI 40/06 in ECO-PAC 2 N-Channel Enhancement Mode Low RDSon, High VDSS MOSFET Package with Electrically Isolated Base = 38 A = 600 V Ω = 70 mΩ 1) L4 L6 K12 L9 P18 R18 NTC Preliminary Data Sheet K13 MOSFET Symbol VDSS VGS ID25 ID90 dv/dt Features Conditions TVJ = 25°C to 150°C EAS EAR TC = 25°C TC = 90°C VDS < VDSS; IF ≤ 50A;diF/dt≤ 200A/µs TVJ = 150°C ID = 10 A; L = 36 mH; TC = 25°C ID = 20 A; L = 5 µH; TC = 25°C Symbol Conditions RDSon VGSth IDSS IGSS Qg Qgs Qgd td(on) tr td(off) tf VF RthJC Maximum Ratings 600 V ±20 V 38 A 25 A 6 V/ns 1.8 1 J mJ Characteristic Values (TVJ = 25°C, unless otherwise specified) min. typ. max. VGS = 10 V; ID = ID90 70 m Ω VDS = 20 V; ID = 3 mA; 3.5 5.5 V VDS = VDSS; VGS = 0 V; TVJ = 25°C 25 µA TVJ = 125°C 60 µA VGS = ±20 V; VDS = 0 V 100 nA 220 nC 55 nC VGS= 10 V; VDS = 350 V; ID = 50 A 125 nC 30 ns 95 ns VGS= 10 V; VDS = 380 V; 100 ns ID = 25 A; RG = 1.8 Ω 10 ns (reverse conduction) IF = 20 A; VGS = 0 V 0.9 1.1 V per MOSFET 0.45 K/W • ECO-PAC 2 with DCB Base - Electrical isolation towards the heatsink - Low coupling capacitance to the heatsink for reduced EMI - High power dissipation - High temperature cycling capability of chip on DCB - solderable pins for DCB mounting • fast CoolMOS power MOSFET - 2nd generation - High blocking capability - Low on resistance - Avalanche rated for unclamped inductive switching (UIS) - Low thermal resistance due to reduced chip thickness • • Enhanced total power density UL registered, E 148688 Applications • • • • • Switched mode power supplies (SMPS) Uninterruptible power supplies (UPS) Power factor correction (PFC) Welding Inductive heating Advantages • • • Data according to IEC 60747 refer to a single diode or transistor unless otherwise stated • • Caution: These Devices are sensitive to electrostatic discharge. Users should observe proper ESD handling precautions. 1) Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight CoolMOS is a trademark of Infineon Technologies AG. 2004 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-PACTM 2 Temperature Sensor NTC Symbol Conditions R25 B25/50 T = 25°C Characteristic Values min. typ. max. 4.75 5.0 5.25 kΩ 3375 K Dimensions in mm (1 mm = 0.0394") Module Symbol TVJ Tstg VISOL Md Conditions a Max. allowable acceleration Symbol Conditions dS dA Weight Creepage distance on surface (Pin to heatsink) Strike distance in air (Pin to heatsink) IISOL ≤ 1 mA; 50/60 Hz; t = 1 s Mounting torque (M4) Maximum Ratings -40...+150 -40...+125 3600 1.5 - 2.0 14 - 18 50 °C °C V~ Nm lb.in. m/s 2 Characteristic Values min. typ. max. 11.2 mm 11.2 mm 24 g 2004 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20