Preliminary SF2163E • SAW Filter for Digital Television • Complies with Directive 2002/95/EC (RoHS) 1076.06 MHz SAW Filter Pb Characteristics : Balance-to-Balanced Operation Terminating Source/Load Impedance : ZS = 150 Ω Maximum Rating Value Units Input Power Level Rating 0 dBm DC Voltage on any Non-ground Terminal 3 V Operating Temperature Range -40 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C 265 °C Maximum Soldering Profile, 5 cycles/ 10 seconds maximum SM3030-8 Electrical Characteristics Characteristic Sym Center Frequency fC 1076.06 ILMAX 3.5 Maximum Insertion Loss, 1056.06 to 1096.06 MHz Notes Min Typ 1.5 dB Bandwidth 52 Amplitude Ripple, 1056.06 to 1096.06 MHz 1.0 Max Units MHz 5.5 dB MHz 2.2 dB Attenuation, Referenced to ILMAX 50 to 994.04 MHz 45 53 1158.20 to 3150 MHz 40 50 3150 to 6000 MHz 18 20 Group Delay Ripple, 1056.06 to 1096.06 MHz 15 Case Style dB 40 nsP-P SM3030-8 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator Standard Reel Quantity 859, YWWS Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Electrical Connection Port 1 Port 2 Connection Balanced Input Balanced Output Ground Terminals 1,2 5,6 All Others Dot Indicates Pin 1 CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 1 of 6 SF2163E - 7/19/10 Filter S11, S22 and S21 Plots Filter Near-in Rejection www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 2 of 6 SF2163E - 7/19/10 Filter Broadband Rejection Filter Passband Amplitude and Group Delay Detail www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 3 of 6 SF2163E - 7/19/10 Tuning Network, 150 ohm Balanced Source/Load L1 L2 22 nH 24 nH www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 4 of 6 SF2163E - 7/19/10 8-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension J J I J K N I A B C D E F G H I J K L M N O L M N mm Nom 3.0 3.0 1.27 0.92 0.75 0.60 0.60 1.20 3.19 0.81 0.96 0.81 1.39 0.23 0.38 Min 2.87 2.87 1.14 0.79 0.62 0.47 0.47 1.07 Max 3.13 3.13 1.40 1.05 0.88 0.73 0.73 1.33 Min 0.113 0.113 0.045 0.031 0.024 0.018 0.018 0.042 Inches Nom 0.118 0.118 0.050 0.036 0.029 0.024 0.024 0.047 0.126 0.032 0.038 0.032 0.055 0.009 0.015 Max 0.123 0.123 0.055 0.041 0.034 0.029 0.029 0.052 Case Materials Materials K O O Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free PCB Footprint Top View TOP VIEW BOTTOM VIEW 1 2 3 8 7 859 YWWS A E C B 8 7 1 6 2 H 6 G 5 5 4 4 D www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. 3 F Page 5 of 6 SF2163E - 7/19/10 Tape and Reel Specifications "B" REF. 100 REF. “B” Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao Bo Ko Pitch W 2.0 4.0 PIN #1 A 1.50 1.75 0.3 ± 0.05 3.35 mm 3.35 mm 1.40 mm 8.0 mm 12.0 mm Bo B Ao 12.0 5.5 RO.3 (MAX.) B Pitch A Ko R0.5 (MAX.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 6 of 6 SF2163E - 7/19/10