54ACTQ04 Quiet Series Hex Inverter General Description The ’ACTQ04 contains six inverters and utilizes NSC Quiet Series technology to guarantee quiet output switching and improved dynamic threshold performance. FACT Quiet Series™ features GTO™ output control and undershoot corrector in addition to a split ground bus for superior ACMOS performance. n Guaranteed simultaneous switching noise level and dynamic threshold performance n Improved latch-up immunity n Minimum 4 kV ESD protection n Outputs source/sink 24 mA n ’ACTQ04 has TTL-compatible inputs n Standard Microcircuit Drawing (SMD) 5962-8973401 Features n ICC reduced by 50% Logic Symbol Connection Diagrams IEEE/IEC Pin Assignment for DIP and Flatpak DS010890-1 DS010890-2 Pin Names Description An Inputs On Outputs Pin Assignment for LCC DS010890-3 GTO™ is a trademark of National Semiconductor Corporation. FACT™ and FACT Quiet Series™ are trademarks of Fairchild Semiconductor Corporation. © 1998 National Semiconductor Corporation DS010890 www.national.com 54ACTQ04 Quiet Series Hex Inverter September 1998 Absolute Maximum Ratings (Note 1) CDIP If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (VCC) DC Input Diode Current (IIK) VI = −0.5V VI = VCC + 0.5V DC Input Voltage (VI) DC Output Diode Current (IOK) VO = −0.5V VO = VCC + 0.5V DC Output Voltage (VO) DC Output Source or Sink Current (IO) DC VCC or Ground Current per Output Pin (ICC or IGND) Storage Temperature (TSTG) DC Latch-up Source or Sink Current Junction Temperature (TJ) 175˚C Recommended Operating Conditions (Note 2) −0.5V to +7.0V Supply Voltage (VCC) ’ACTQ Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) 54ACTQ Minimum Input Edge Rate (dV/dt) ’ACTQ Devices VIN from 0.8V to 2.0V VCC @ 4.5V, 5.5V −20 mA +20 mA −0.5V to VCC + 0.5V −20 mA +20 mA −0.5V to VCC + 0.5V ± 50 mA 4.5V to 5.5V 0V to VCC 0V to VCC −55˚C to +125˚C 125 mV/ns Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation outside of databook specifications. ± 50 mA −65˚C to +150˚C Note 2: All commercial packaging is not recommended for applications requiring greater than 2000 temperature cycles from −40˚C to +125˚C. ± 300 mA DC Characteristics for ’ACTQ Family Devices Symbol Parameter VCC 54ACTQ TA = (V) −55˚C to +125˚C Units Conditions Guaranteed Limits VIH VIL VOH Minimum High Level 4.5 2.0 Input Voltage 5.5 2.0 Maximum Low Level 4.5 0.8 Input Voltage 5.5 0.8 Minimum High Level 4.5 4.4 Output Voltage 5.5 5.4 V VOUT = 0.1V V or VCC − 0.1V VOUT = 0.1V V or VCC − 0.1V IOUT = −50 µA (Note 3) VIN = VILor VIH VOL 4.5 3.70 5.5 4.70 Maximum Low Level 4.5 0.1 Output Voltage 5.5 0.1 V IOH = −24 mA V IOH = −24 mA IOUT = 50 µA (Note 3) VIN = VILor VIH IIN Maximum Input 4.5 0.50 5.5 0.50 V IOL = 24 mA ± 1.0 µA IOL = 24 mA VI = VCC, GND 5.5 5.5 1.6 mA VI = VCC − 2.1V Leakage Current ICCT Maximum ICC/Input IOLD Minimum Dynamic 5.5 50 mA IOHD Output Current (Note 4) 5.5 −50 mA VOLD = 1.65V Max VOHD = 3.85V Min ICC Maximum Quiescent 5.5 40.0 µA VIN = VCC 5.0 1.5 V 13 Supply Current VOLP Quiet Output Maximum or GND (Note 5) Dynamic VOL www.national.com (Note 6) 2 DC Characteristics for ’ACTQ Family Devices Symbol Parameter (Continued) VCC 54ACTQ TA = (V) −55˚C to +125˚C Units Conditions Guaranteed Limits VOLV Quiet Output Minimum 5.0 -1.2 V Dynamic VOL Figures 2-12, 13 (Note 6) Note 3: All outputs loaded; thresholds on input associated with output under test. Note 4: Maximum test duration 2.0 ms, one output loaded at a time. Note 5: ICC for 54ACTQ @ 25˚C is identical to 74ACTQ @ 25˚C. Note 6: Max number of outputs defined as (n). Data inputs are 0V to 3V. One output @ GND. Note 7: Max number of data inputs (n) switching. (n−1) inputs switching 0V to 3V (’ACTQ). Input-under-test switching: 3V to threshold (V ILD), 0V to threshold (VIHD), f = 1 MHz. AC Electrical Characteristics Symbol tPLH Parameter Propagation Delay VCC (V) (Note 8) 54ACTQ TA = −55˚C Fig. No. to +125˚C CL = 50 pF Units Min Max 5.0 1.0 9.5 ns 5.0 1.0 9.5 ns Data to Output tPHL Propagation Delay Data to Output Note 8: Voltage Range 5.0 is 5.0V ± 0.5V. Note 9: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH to LOW (tOSHL) or LOW to HIGH (tOSLH). Parameter guaranteed by design. Capacitance Symbol CIN CPD Typ Units Input Capacitance Parameter 4.5 pF Power Dissipation 75 pF Conditions VCC = OPEN VCC = 5.0V Capacitance 3 www.national.com Physical Dimensions inches (millimeters) unless otherwise noted 20-Terminal Ceramic Leadless Chip Carrier (L) NS Package Number E20A 14-Lead Ceramic Dual-In-Line Package (D) NS Package Number J14A www.national.com 4 54ACTQ04 Quiet Series Hex Inverter Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Ceramic Flatpak (F) NS Package Number W14B LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into sonably expected to cause the failure of the life support the body, or (b) support or sustain life, and whose faildevice or system, or to affect its safety or effectiveness. ure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: [email protected] www.national.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: [email protected] Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Français Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: [email protected] National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.