DTU19P10 www.din-tek.jp P-Channel 100 V (D-S) MOSFET FEATURES PRODUCT SUMMARY VDS (V) RDS(on) (Ω) - 100 ID (A) 0.195 at VGS = - 10 V - 19 0.210 at VGS = - 4.5 V - 17 Qg (Typ.) 11.7 • Halogen-free According to IEC 61249-2-21 Definition • TrenchFET® Power MOSFET • 100 % Rg and UIS Tested • Compliant to RoHS Directive 2002/95/EC APPLICATIONS • Power Switch • DC/DC Converters S TO-252 G Drain Connected to Tab G D S D Top View P-Channel MOSFET ABSOLUTE MAXIMUM RATINGS TC = 25 °C, unless otherwise noted Symbol Limit Drain-Source Voltage VDS - 100 Gate-Source Voltage VGS ± 20 Parameter Continuous Drain Current (TJ = 150 °C) TC = 25 °C TC = 70 °C IDM Pulsed Drain Current Avalanche Current Single Avalanche Energya Maximum Power Dissipationa Operating Junction and Storage Temperature Range ID L = 0.1 mH TC = 25 °C TA = 25 °Cc V - 19 - 12.1 - 45 IAS - 18 EAS 16.2 PD Unit 32.1 A mJ b 2.5 W TJ, Tstg - 55 to 150 °C Unit THERMAL RESISTANCE RATINGS Parameter Symbol Limit Junction-to-Ambient (PCB Mount)c RthJA 50 Junction-to-Case (Drain) RthJC 3.9 °C/W Notes: a. Duty cycle ≤ 1 %. b. See SOA curve for voltage derating. c. When Mounted on 1" square PCB (FR-4 material). 1 DTU19P10 www.din-tek.jp SPECIFICATIONS TJ = 25 °C, unless otherwise noted Parameter Symbol Test Conditions Min. VDS VDS = 0 V, ID = - 250 µA - 100 VGS(th) VDS = VGS, ID = - 250 µA -1 Typ. Max. Unit Static Drain-Source Breakdown Voltage Gate Threshold Voltage IGSS Gate-Body Leakage Zero Gate Voltage Drain Current On-State Drain Currenta Drain-Source On-State Resistancea Forward Transconductancea IDSS - 2.5 VDS = 0 V, VGS = ± 20 V ± 250 VDS = - 100 V, VGS = 0 V -1 VDS = - 100 V, VGS = 0 V, TJ = 125 °C - 50 VDS = - 100 V, VGS = 0 V, TJ = 150 °C - 250 VDS ≤ - 10 V, VGS = - 10 V ID(on) RDS(on) gfs - 15 V nA µA A VGS = - 10 V, ID = - 3.6 A 0.162 0.195 VGS = - 4.5 V, ID = - 3.4 A 0.175 0.210 VDS = - 15 V, ID = - 3.6 A 12 Ω S Dynamicb Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Total Gate Chargec Qg Gate-Source Chargec Qgs Gate-Drain Chargec Qgd Rise Timec VDS = - 50 V, VGS = - 10 V, ID = - 3.6 A VDS = - 50 V, VGS = - 4.5 V, ID = - 3.6 A Fall Timec td(off) 23.2 34.8 11.7 17.6 3.5 f = 1 MHz VDD = - 50 V, RL = 17.2 Ω ID ≅ - 2.9 A, VGEN = - 10 V, Rg = 1 Ω tf Drain-Source Body Diode Ratings and Characteristics TC = 25 °C 1.2 5.7 11.5 7 14 12 18 33 50 9 18 - 19 Pulsed Current ISM - 45 Forward Voltagea VSD Reverse Recovery Time Peak Reverse Recovery Current Reverse Recovery Charge IF = - 2.9 A, VGS = 0 V - 0.8 IF = - 2.9 A, dI/dt = 100 A/µs 98 trr IRM(REC) Qrr Ω ns b IS Continuous Current nC 4.8 td(on) tr c pF 65 41 Rg Gate Resistance Turn-On Delay Timec Turn-Off Delay Time 1055 VGS = 0 V, VDS = - 50 V, f = 1 MHz A - 1.5 V 50 75 ns -4 -6 A 147 nC Notes: a. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2 %. b. Guaranteed by design, not subject to production testing. c. Independent of operating temperature. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2 DTU19P10 www.din-tek.jp TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 15 0.30 V GS = 10 V thru 5 V V GS = 4 V R DS(on) - On-Resistance (Ω) I D - Drain Current (A) 12 9 6 V GS = 3 V 3 0 0.25 0.20 V GS = 4.5 V V GS = 10 V 0.15 0.10 0 1 2 3 4 0 6 3 V DS - Drain-to-Source Voltage (V) 13 19 ID - Drain Current (A) Output Characteristics On-Resistance vs. Drain Current 2.0 0.60 R DS(on) - On-Resistance (Ω) 1.6 I D - Drain Current (A) 9 1.2 0.8 T C = 25 °C 0.4 0.45 T J = 150 °C 0.30 T J = 25 °C 0.15 T C = 125 °C T C = - 55 °C 0.0 0.00 0 1 2 3 4 0 V GS - Gate-to-Source Voltage (V) 2 4 6 8 10 V GS - Gate-to-Source Voltage (V) Transfer Characteristics On-Resistance vs. Gate-to-Source Voltage 25 10 VGS - Gate-to-Source Voltage (V) g fs - Transconductance (S) ID = 3.6 A 20 T C = - 55 °C 15 T C = 25 °C 10 T C = 125 °C 5 0 8 V DS = 50 V 6 V DS = 25 V 4 V DS = 80 V 2 0 0 3 6 9 ID - Drain Current (A) Transconductance 13 19 0 5 10 15 20 25 Qg - Total Gate Charge (nC) Gate Charge 3 DTU19P10 www.din-tek.jp TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 100 - 1.1 I S - Source Current (A) - 1.4 T J = 150 °C ID = 250 μA VGS(th) (V) 10 - 1.7 T J = 25 °C 1 - 2.0 0.1 0.0 0.3 0.6 0.9 - 2.3 - 50 1.2 0 25 50 75 V SD - Source-to-Drain Voltage (V) T J - Temperature (°C) Source-Drain Diode Forward Voltage Threshold Voltage 100 125 150 100 125 150 - 100 1200 VDS - Drain-to-Source Voltage (V) 1600 C - Capacitance (pF) - 25 Ciss 800 400 - 106 ID = 250 μA - 112 - 118 - 124 Coss Crss 0 0 20 40 60 80 - 130 - 50 100 - 25 0 25 50 75 V DS - Drain-to-Source Voltage (V) TJ - Junction Temperature (°C) Capacitance Drain Source Breakdown vs. Junction Temperature 2.1 10 V GS = 10 V ID = 3.6 A V GS = 4.5 V 1.3 0.9 I D - Drain Current (A) (Normalized) R DS(on) - On-Resistance 8 1.7 6 4 2 0.5 - 50 4 0 - 25 0 25 50 75 100 125 150 0 25 50 75 100 T J - Junction Temperature (°C) T C - Case Temperature (°C) On-Resistance vs. Junction Temperature Current Derating 125 150 DTU19P10 TYPICAL CHARACTERISTICS www.din-tek.jp 25 °C, unless otherwise noted 100 100 Limited by R DS(on)* I D - Drain Current (A) IDAV (A) 19 TJ = 25 °C TJ = 150 °C 10 100 μs 1 ms 1 10 ms 100 ms 1 s, 10 s, DC 0.1 TA = 25 °C Single Pulse BVDSS Limited 1 10-6 10-5 10-4 10-3 10-2 10-1 Time (s) Single Pulse Avalanche Current Capability vs. Time 0.01 0.1 1 10 100 V DS - Drain-to-Source Voltage (V) * V GS > minimum VGS at which RDS(on) is specified Safe Operating Area Normalized Effective Transient Thermal Impedance 1 Duty Cycle = 0.5 0.2 0.1 0.05 0.1 10 -4 0.02 Single Pulse 10 -3 10 -2 10 -1 1 10 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Case 5 Package Information www.din-tek.jp TO-252AA CASE OUTLINE E MILLIMETERS A C2 e b2 C A1 D1 e1 L gage plane height (0.5 mm) L4 b L5 H D L3 b3 MIN. MAX. MIN. MAX. A 2.18 2.38 0.086 0.094 A1 - 0.127 - 0.005 b 0.64 0.88 0.025 0.035 b2 0.76 1.14 0.030 0.045 b3 4.95 5.46 0.195 0.215 C 0.46 0.61 0.018 0.024 C2 0.46 0.89 0.018 0.035 D 5.97 6.22 0.235 0.245 D1 5.21 - 0.205 0.265 E 6.35 6.73 0.250 E1 4.32 - 0.170 - H 9.40 10.41 0.370 0.410 e 2.28 BSC 0.090 BSC e1 4.56 BSC 0.180 BSC L 1.40 1.78 0.055 0.070 L3 0.89 1.27 0.035 0.050 L4 - 1.02 - 0.040 L5 1.14 1.52 0.045 0.060 ECN: X12-0247-Rev. M, 24-Dec-12 DWG: 5347 E1 Note • Dimension L3 is for reference only. 1 INCHES DIM. Application Note www.din-tek.jp RECOMMENDED MINIMUM PADS FOR DPAK (TO-252) 0.224 0.243 0.087 (2.202) 0.090 (2.286) (10.668) 0.420 (6.180) (5.690) 0.180 0.055 (4.572) (1.397) Recommended Minimum Pads Dimensions in Inches/(mm) APPLICATION NOTE 1 Legal Disclaimer Notice www.din-tek.jp Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Din-Tek Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Din-Tek”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Din-Tek makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Din-Tek disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Din-Tek’s knowledge of typical requirements that are often placed on Din-Tek products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Din-Tek’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Din-Tek products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Din-Tek product could result in personal injury or death. Customers using or selling Din-Tek products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Din-Tek personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Din-Tek. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Din-Tek Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Din-Tek documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Din-Tek Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Din-Tek documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. 1