CM600HA-24A Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Single IGBTMOD™ A-Series Module 600 Amperes/1200 Volts H E F G D J W - DIA. (4 TYP.) K C E Y Y N C E X G Z AE AG AF P Q M L AB AA K C AF AH AJ D B R A Description: Powerex IGBTMOD™ Modules are designed for use in switching applications. Each module consists of one IGBT Transistor in a single configuration with a reverse connected super-fast recovery free-wheel diode. All components and interconnects are isolated from the heat sinking baseplate, offering simplified system assembly and thermal management. U - THD. (2 TYP.) V -THD. (2 TYP.) AD S T AC E C E G Outline Drawing and Circuit Diagram Dimensions Inches Millimeters Dimensions Inches Millimeters A 4.25 T B 3.66±0.01 93.0±0.25 U C 0.63 16.0 V M4 Metric M4 D 0.30 7.5 W 0.256 Dia. 6.5 Dia. E 0.69 17.5 X 0.79 20.0 F 1.14 29.0 Y 0.35 9.0 G 0.79 20.0 Z 0.43 11.0 H 0.94 24.0 AA 0.53 13.55 108.0 1.02+0.04/-0.02 25.8+1/-0.5 M6 Metric M6 J 0.55 13.9 AB 0.27 7.0 K 0.24 6.0 AC 0.98 25.0 L 2.44 62.0 AD 1.38 35.0 M 1.89±0.01 48.0±0.25 AE 0.45 11.5 N 0.39 10.0 AF 0.2 5.0 P 0.39 20.0 AG 0.25 6.5 Q 0.51 23.0 AH 0.12 3.2 R 0.33 8.5 AJ 0.32 8.2 S 1.42+0.04/-0.02 36.0+1/-0.5 01/10 Rev. 1 Features: £ Low Drive Power £ Low VCE(sat) £ Discrete Super-Fast Recovery Free-Wheel Diode £ Isolated Baseplate for Easy Heat Sinking Applications: £ DC Chopper £ Inverter £ UPS £ Forklift Ordering Information: Example: Select the complete part module number you desire from the table below -i.e. CM600HA-24A is a 1200V (VCES), 600 Ampere Single IGBTMOD™ Power Module. Type Current Rating Amperes VCES Volts (x 50) CM 600 24 1 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM600HA-24A Single IGBTMOD™ A-Series Module 600 Amperes/1200 Volts Absolute Maximum Ratings, Tj = 25°C unless otherwise specified Ratings Symbol CM600HA-24A Units Tj –40 to 150 °C Junction Temperature Storage Temperature Tstg –40 to 125 °C Collector-Emitter Voltage (G-E Short) VCES 1200 Volts Gate-Emitter Voltage (C-E Short) VGES ±20 Volts IC 600 Amperes Collector Current (DC, TC = 87°C)*4 Peak Collector Current (Pulse, Repetitive)*2 ICM 1200 Amperes Maximum Collector Dissipation (TC = 25°C)*2,*4 PC 3670 Watts 1 Emitter Current (TC = 25°C) IE* 600 Amperes IEM*1 1200 Amperes Mounting Torque, M6 Main Terminal — 26 in-lb Mounting Torque, M6 Mounting — 26 in-lb Mounting Torque, M4 G(E) Terminal — 13 in-lb Weight — 480 Grams VISO 2500 Volts Peak Emitter Current (Pulse, Repetitive)*2 Isolation Voltage (Main Terminal to Baseplate, f = 60Hz, AC 1 min.) Electrical Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Min. Typ. Max. Units Collector-Cutoff Current ICES VCE = VCES, VGE = 0V — — 1.0 mA Gate Leakage Current IGES ±VGE = VGES, VCE = 0V — — 1.5 µA Gate-Emitter Threshold Voltage VGE(th) IC = 60mA, VCE = 10V 6.0 7.0 8.0 Volts Collector-Emitter Saturation Voltage VCE(sat) IC = 600A, VGE = 15V, Tj = 25°C*3 — 2.1 3.0 Volts IC = 600A, VGE = 15V, Tj = 125°C*3 — 2.4 — Volts IC = 600A, VCE = 10V*3 120 — — S Forward Transfer Admittance |γfs| Input Capacitance Cies Output Capacitance Coes Reverse Transfer Capacitance Cres Total Gate Charge QG Inductive Turn-on Delay Time Load Rise Time Switch Turn-off Delay Time Time Fall Time — — 105 nf VCE = 10V, VGE = 0V — — 9 nf — — VCC = 600V, IC = 600A, VGE = 15V — 3000 — nC td(on) 2.0 nf — — 660 ns tr VCC = 600V, IC = 600A, — — 190 ns td(off) VGE = ±15V, RG = 0.52Ω, — — 700 ns tf Inductive Load — — 350 ns IE = 600A — — 250 ns — 19.0 — µC — — 3.8 Volts 0.52 — 7.8 Ω 1 Diode Reverse Recovery Time trr* Diode Reverse Recovery Charge Qrr*1 Emitter-Collector Voltage VEC*1 External Gate Resistance RG *1 *2 *3 *4 2 Test Conditions IE = 600A, VGE = 0V*3 Represents characteristics of the anti-parallel, emitter-to-collector free-wheel diode (FWDi). Pulse width and repetition rate should be such that device junction temperature (Tj) does not exceed Tj(max) rating. Pulse width and repetition rate should be such as to cause negligible temperature rise. Case temperature (TC), and heatsink temperature (Tf) measured point is just under the chips. 01/10 Rev. 1 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM600HA-24A Single IGBTMOD™ A-Series Module 600 Amperes/1200 Volts Thermal and Mechanical Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions 4 Min. Typ. Max. Units Thermal Resistance, Junction to Case Rth(j-c)Q Per IGBT* — — 0.034 °C/W Thermal Resistance, Junction to Case Rth(j-c)D Per FWDi*4 — — 0.051 °C/W Case to Heatsink, — 0.02 — °C/W Contact Thermal Resistance Rth(c-f) Thermal Grease Applied*4,*5 *4 Case temperature (TC), and heatsink temperature (Tf) measured point is just under the chips. *5 Typical value is measured by using thermally conductive grease of λ = 0.9 [W/(m • K)]. 15 900 12 600 11 300 10 9 0 2 4 6 8 1 300 0 600 900 IC = 1200A 6 IC = 600A IC = 240A 4 2 0 1200 6 8 10 12 14 16 18 GATE-EMITTER VOLTAGE, VGE, (VOLTS) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) CAPACITANCE VS. VCE (TYPICAL) HALF-BRIDGE SWITCHING CHARACTERISTICS (TYPICAL) 103 103 103 102 Tj = 25°C Tj = 125°C 0 8 COLLECTOR-CURRENT, IC, (AMPERES) CAPACITANCE, Cies, Coes, Cres, (nF) EMITTER CURRENT, IE, (AMPERES) 2 Tj = 25°C COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) 104 101 3 0 10 VGE = 15V Tj = 25°C Tj = 125°C 1 2 3 4 EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) 01/10 Rev. 1 102 101 Coes Cres 100 td(off) 102 tr VCC = 600V VGE = 15V RG = 0.52Ω Tj = 125°C Inductive Load VGE = 0V 5 10-1 10-1 100 101 20 tf td(on) Cies SWITCHING TIME, (ns) 0 10 4 Tj = 25°C 13 COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) VGE = 20V COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) COLLECTOR CURRENT, IC, (AMPERES) 1200 COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) OUTPUT CHARACTERISTICS (TYPICAL) 102 COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) 101 101 102 103 COLLECTOR CURRENT, IC, (AMPERES) 3 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM600HA-24A Single IGBTMOD™ A-Series Module 600 Amperes/1200 Volts REVERSE RECOVERY CHARACTERISTICS (TYPICAL) 20 Irr trr 102 VCC = 600V 12 8 4 900 0 1800 2700 3600 GATE CHARGE, QG, (nC) SWITCHING LOSS VS. GATE RESISTANCE (TYPICAL) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT & FWDi) VCC = 600V VGE = 15V IC = 600A Tj = 125°C Inductive Load Eon 100 10-1 102 Eoff 10-2 Err 101 VCC = 400V EMITTER CURRENT, IE, (AMPERES) 103 4 16 0 103 102 IC = 600A 0 2 4 6 GATE RESISTANCE, RG, (W) 8 10 SWITCHING LOSS, (mJ/PULSE) 102 101 101 SWITCHING LOSS, (mJ/PULSE) GATE-EMITTER VOLTAGE, VGE, (VOLTS) VCC = 600V VGE = 15V RG = 0.52W Tj = 25°C Inductive Load NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c') Zth = Rth • (NORMALIZED VALUE) REVERSE RECOVERY, Irr, trr, (ns) 103 SWITCHING LOSS VS. COLLECTOR CURRENT (TYPICAL) GATE CHARGE VS. VGE 10-3 10-3 10-2 10-1 100 4500 Err Eoff 101 Eon 100 101 VCC = 600V VGE = 15V RG = 0.52W Tj = 125°C Inductive Load 102 COLLECTOR CURRENT, IC, (AMPERES) EMITTER CURRENT, IE, (AMPERES) 103 101 10-1 Single Pulse TC = 25°C Per Unit Base = Rth(j-c) = 0.034°C/W (IGBT) Rth(j-c) = 0.051°C/W (FWDi) 10-2 10-5 10-4 10-3 10-3 TIME, (s) 01/10 Rev. 1