RoHS BAT48 D T ,. L Schottky Barrier Diode Features 1. High reliability 2. Very low forward voltage 3. Small surface mounting type IC Applications Applications where a very low forward voltage is required R T Absolute Maximum Ratings Tj=25℃ C E L Parameter Repetitive peak reverse voltage O C O N Test Conditions Symbol Value Unit VRRM 40 V IF 350 mA Forward continuous current Tamb=25℃ Repetitive peak forward current Tamb=25℃, tp 1 s IFRM 1 A Surge forward current tp 10ms, Tamb=25℃ IFSM 7.5 A Tamb=65℃ Ptot 330 mW Maximum junction temperature Tj 125 ℃ Ambient operating temperature range TA -65~+125 ℃ Storage temperature range Tstg -65~+150 ℃ E Power dissipation J E Maximum Thermal Resistance W Tj=25℃ Parameter Junction ambient Test Conditions Symbol Value Unit on PC board 50mm×50mm×1.6mm RthJA 300 ℃/W WEJ ELECTRONIC CO. Http:// www.wej.cn E-mail:[email protected] RoHS BAT48 Dimensions in mm Cathode identification D T ,. L Type No. φ0.55 max. Cathode φ2.0 max. 26 min. 4.2 max. Standard Glass Case JEDEC DO 35 R T J E Anode BAT 48 O IC C 26 min. O N C E L E W WEJ ELECTRONIC CO. Http:// www.wej.cn E-mail:[email protected] RoHS BAT48 Power: Ptot(mW) Forward current: IF(mA) Characteristics (Tj=25℃ unless otherwise specified) Ambient temperature: Ta(℃) Figure 1. Admissible power dissipation Reverse leakage current: IR(uA) vs. ambient temperature J E W R T O N IC C D T ,. L O Forward voltage: VF(V) Figure 2. Forward characteristics C E L E Reverse voltage: VR(V) Figure 3. Typical reverse characteristics WEJ ELECTRONIC CO. Http:// www.wej.cn E-mail:[email protected] RoHS BAT48 Electrical Characteristics D T ,. L Tj=25℃ Parameter Symbol Reverse breakdown voltage Test Conditions V(BR)R Leakage Current Typ Max Unit 40 - - V VR=10V - - 2 μA VR=10V, Tj=60℃ - - 15 μA VR=20V - - 5 μA VR=20V, Tj=60℃ - - 25 μA VR=40V - - 25 μA VR=40V, Tj=60℃ C - 50 μA - 0.25 V - 0.30 V - - 0.40 V - - 0.50 V - - 0.75 V - - 0.90 V - 12 - pF IR=10μA (pulsed) IR Pulse test tp<300μs, δ<2% Min - IF=0.1mA - IF=1mA Forward voltage Pulse test tp<300μs, δ<2% IF=50mA IF=200mA IF=500mA Capacitance Ctot VR=1V, f=1MHz R T J E IC IF=10mA VF O N - O C E L E W WEJ ELECTRONIC CO. Http:// www.wej.cn E-mail:[email protected]