BDS13 BDS13SMD BDS13SMD05 BDS14 BDS14SMD BDS14SMD05 BDS15 BDS15SMD BDS15SMD05 SILICON PNP EPITAXIAL BASE IN TO220 METAL AND CERAMIC SURFACE MOUNT PACKAGES MECHANICAL DATA Dimensions in mm(inches) 10.6 (0.42) 4.6 (0.18) FEATURES • HERMETIC METAL OR CERAMIC PACKAGES 10.6 (0.42) 3.70 Dia. Nom 1.5(0.53) 16.5 (0.65) 0.8 (0.03) • HIGH RELIABILITY • MILITARY AND SPACE OPTIONS 12.70 (0.50 min) 1 2 3 • SCREENING TO CECC LEVELS • FULLY ISOLATED (METAL VERSION) APPLICATIONS 1.0 (0.039) 2.54 (0.1) BSC 2.70 (0.106) • POWER LINEAR AND SWITCHING TO220M - TO220 Metal Package - Isolated (TO-257AB) APPLICATIONS • GENERAL PURPOSE POWER 0 .7 6 (0 .0 3 0 ) m in . 3 .1 7 5 (0 .1 2 5 ) M a x . 2 .4 1 (0 .0 9 5 ) 3 0 .7 6 (0 .0 3 0 ) m in . ! 5 .7 2 (.2 2 5 ) 2 1 0 .1 6 (0 .4 0 0 ) 1 3 .0 5 (0 .1 2 0 ) 0 .1 2 7 (0 .0 0 5 ) 1 6 .0 2 (0 .6 3 1 ) 1 5 .7 3 (0 .6 1 9 ) 4 .1 4 (0 .1 6 3 ) 3 .8 4 (0 .1 5 1 ) 7 .5 4 (0 .2 9 6 ) 3 .6 0 (0 .1 4 2 ) M a x . 2 .4 1 (0 .0 9 5 ) 1 0 .6 9 (0 .4 2 1 ) 1 0 .3 9 (0 .4 0 9 ) 0 .7 6 (0 .0 3 0 ) m in . 0 .8 9 (0 .0 3 5 ) m in . 3 .7 0 (0 .1 4 6 ) 3 .7 0 (0 .1 4 6 ) 3 .4 1 (0 .1 3 4 ) 3 .4 1 (0 .1 3 4 ) 0 .1 2 7 (0 .0 0 5 ) 9 .6 9 .3 1 1 .5 1 1 .2 7 (0 8 (0 8 (0 8 (0 .3 8 .3 6 .4 5 .4 4 1 6 P L C S 0 .5 0 (0 .0 2 0 ) 1 ) 9 ) 6 ) 4 ) 0 .5 0 (0 .0 2 0 ) 0 .2 6 (0 .0 1 0 ) SMD1 - Ceramic Surface Mount Package (TO-276AB) Pin 1 – Base 0 .1 2 7 (0 .0 0 5 ) 7 .2 6 (0 .2 8 6 ) 0 .5 0 (0 .0 2 0 ) 0 .2 6 (0 .0 1 0 ) SMD05 - Ceramic Surface Mount Package (TO-276AA) Pin 2 – Collector Pin 3 – Emitter ABSOLUTE MAXIMUM RATINGS (Tcase=25°C unless otherwise stated) BDS13 VCBO VCEO VEBO IE , IC IB Ptot Tstg Tj Collector - Base voltage (IE = 0) Collector - Emitter voltage (IB = 0) Emitter - Base voltage (IC = 0) Emitter , Collector current Base current Total power dissipation at Tcase ≤ 25°C Storage Temperature Junction Temperature BDS14 BDS15 - 60V - 80V - 100V - 60V - 80V - 100V - 5V - 15A - 5A 90W –65 to 200°C 200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3255 Issue 2 BDS13 BDS13SMD BDS13SMD05 BDS14 BDS14SMD BDS14SMD05 BDS15 BDS15SMD BDS15SMD05 ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter Test Conditions ICBO Collector cut-off current (IE = 0) ICEO Collector cut-off current (IB = 0) IEBO Emitter cut-off current (IC = 0) BDS13 BDS14 BDS15 BDS13 BDS14 BDS15 VCB = - 60V VCB = - 80V VCB = - 100V VCE = - 30V VCE = - 40V VCE = - 50V VCE(sat)* VBE(sat)* VBE* hFE* fT Typ. Max. - 500 - 500 - 500 -1 -1 -1 VEB = - 5V BDS13 Collector - Emitter BDS14 sustaining voltage (IB = 0) BDS15 Collector - Emitter IC = - 5A saturation voltage IC = - 10A Base - Emitter IC = - 10A saturation voltage Base - Emitter voltage IC = - 5A IC = - 0.5A DC Current Gain IC = - 5A IC = - 10A IC = - 0.5A Transition frequency f = 1MHz VCEO(sus)* Min. -1 IC = - 100mA - 60 - 80 - 100 Unit µA mA mA V IB = - 0.5A IB = - 2.5A -1 -3 V IB = - 2.5A - 2.5 V VCE = - 4V VCE = - 4V VCE = - 4V VCE = - 4V VCE = - 4V - 1.5 300 150 V 40 15 5 MHz 3 *Pulsed : Pulse duration = 300 µs , duty cycle = 1.5% SWITCHING CHARACTERISTICS Parameter ton ts tr On Time Storage Time Fall Time (td + tr) Test Conditions Max. Unit IC = - 4A VCC = - 30V IB1 = - 0.4A IC = - 4A VCC = - 30V IB1 = –IB2 = 0.4A 0.7 1.0 0.8 µs µs µs Test Conditions Max. Unit 1.4 °C/W THERMAL CHARACTERISTICS RθJ-C Thermal Resistance Junction to Case Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3255 Issue 2