ETC 2SC3623AK

DATA SHEET
SILICON TRANSISTORS
2SC3623, 3623A
NPN SILICON EPITAXIAL TRANSISTOR
FOR LOW-FREQUENCY POWER AMPLIFIERS AND SWITCHING
FEATURES
PACKAGE DRAWING (UNIT: mm)
• High hFE:
hFE = 1000 to 3200 @VCE = 5.0 V, IC = 1.0 mA
• Low VCE(sat):
VCE(sat) = 0.07 V TYP. @IC/IB = 50 mA/5.0 mA
• High VEBO:
VEBO: 12 V (2SC3623)
VEBO: 15 V (2SC3623A)
ABSOLUTE MAXIMUM RATINGS (Ta = 25°°C)
Collector to base voltage
VCBO
Ratings
2SC3623 2SC3623A
60
Collector to emitter voltage
VCEO
50
Parameter
Symbol
12
Unit
V
V
Emitter to base voltage
VEBO
Collector current (DC)
IC(DC)
150
15
mA
V
Total power dissipation
PT
250
mW
Junction temperature
Tj
150
°C
Storage temperature
Tstg
−55 to +150
°C
Electrode connection
1. Emitter (E)
2. Collector (C)
3. Base (B)
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. D13521EJ4V0DS00
Date Published April 2002 N CP(K)
Printed in Japan
©
1998
2002
2SC3623, 3623A
ELECTRICAL CHARACTERISTICS (Ta = 25°°C)
Parameter
Symbol
Collector cutoff current
Conditions
TYP.
MAX.
Unit
100
nA
100
nA
−
VCB = 50 V, IE = 0
Emitter cutoff current
IEBO
VEB = 10 V, IC = 0
DC current gain
hFE1
VCE = 5.0 V, IC = 1.0 mA*
1000
DC current gain
hFE2
VCE = 5.0 V, IC = 100 mA*
200
DC base voltage
VBE
VCE = 5.0 V, IC = 1.0 mA*
560
Collector saturation voltage
VCE(sat)
IC = 50 mA, IB = 5.0 mA*
0.07
0.30
V
Base saturation voltage
VBE(sat)
IC = 50 mA, IB = 5.0 mA*
VCE = 5.0 V, IE = −10 mA
0.8
1.2
V
250
MHz
Cob
VCB = 5 V, IE = 0, f = 1.0 MHz
3.0
Turn-on time
ton
0.13
Storage time
tstg
0.72
µs
Turn-off time
toff
VCC = 10 V, VBE(off) = –2.7 V
IC = 50 mA
IB1 = −IB2 = 1 mA
pF
µs
1.22
µs
Gain bandwidth product
Output capacitance
fT
* Pulse test PW ≤ 350 µs, duty cycle ≤ 2%
hFE CLASSIFICATION
Marking
L
K
hFE1
1000 to 2000
1600 to 3200
TYPICAL CHARACTERISTICS (Ta = 25°°C)
2
MIN.
ICBO
Data Sheet D13521JJ4V0DS
1800
3200
350
mV
2SC3623, 3623A
Data Sheet D13521JJ4V0DS
3
2SC3623, 3623A
• The information in this document is current as of July, 2001. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data
books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products
and/or types are available in every country. Please check with an NEC sales representative for
availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
• NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
• Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
• While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
• NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
M8E 00. 4