Timers Asymmetrical Recycler Timer Type VIPP51CM24 FEATURES • Time range 0.1 s to 100h • 2 selectable functions Aa - Asymmetrical recycler ON first Ab - Asymmetrical recycler OFF first • Selection of time range by front knobs • Knob adjustable time setting • Automatic start • Output: 1 x SPDT relay • For mounting on DIN rail in accordance with DIN/EN 50 022 • 17.5 mm DIN-rail housing • Combined AC and DC power supply voltage • LED indication for relay status and power supply ON Description & Mode of operation: Combined function timer with asymmetrical recycler ON or OFF first selectable by connection between pins A1 and Y1. Individual selection of the time ranges from 0.1 s to 100 h. For mounting on DIN-rail. Function Aa - Asymmetrical Recycler ON-time period first The relay operates and the ON-time period (T1) begins as soon as the power supply is connected. After the ON-time period the relay releases for the OFF-time period (T2). This sequence continues until the power supply is interrupted for at least 200 ms. Function Ab - Asymmetrical Recycler OFF-time period first The OFF-time period (T1) begins as soon as the power supply is connected. After the OFF-time period the relay operates for the ON-time period (T2). This sequence continues until the power supply is interrupted for at least 200 ms. Specifications Output: Timing: Time ranges Knob selectable Setting accuracy Repeatability Time variation Within rated power supply Within ambient temperature Reset Power supply interruption 0.1 to 1 s 1 to 10 s 6 to 60 s 60 to 600 s 0.1 to 1 h 1 to 10 h 10 to 100 h ≤ 5% ≤ 0.2% (with respect to full scale value) ≤ 0.2% - whole range ≤ 500 ppm/°C ≥ 200 ms Output Rated insulation voltage Contact Ratings (AgSnO2) Resistive Loads AC 1 DC 12 Small inductive loads AC 15 DC 13 Mechanical life Electrical life Operating frequency Dielectric strength Dielectric voltage Rated impulse withstand voltage 1 x SPDT relay 250 VAC (RMS) µ 5 A @ 250 VAC 5 A @ 24 VDC 2.5 A @ 250 VAC 2.5 A @ 24 VDC ≥ 30 x 106 operations ≥ 105 operations (at 5 A, 250 V, cos ϕ = 1) < 7200 operations/h 2 kVAC (RMS) 2.5 kV (1.2/50 µs) Supply: Power Supply Rated operational voltage trough terminals A1, A2: Voltage interruption Rated operational power www.dold-relay.com Overvoltage cat. II (IEC 60664, IEC 60038) 24 VDC +10% -15% and 24 to 240 VAC +10% -15% 45 to 65 Hz ≤ 10 ms 1.5 W 1 VIPP51 General: Power ON delay Power OFF delay Indication for Power supply ON Output relays ON Environment Degree of protection Pollution degree Operating temperature Storage temperature Housing Dimensions Material Weight Screw terminals Tightening torque CE Marking EMC Immunity Emission Function, Range and Time Setting: ≤ 150 ms ≤ 200 ms LED, green LED, yellow (EN 60529) IP 20 2 (IEC 60664) -20 to +60 °C, R:H: < 95% -30 to +80 °C, R:H: < 95% Setting of function: No connection between terminals A1 and Y1: Aa - asymmetrical recycler (ON first) Connection between terminals A1 and Y1: Ab - asymmetrical recycler (OFF first) Upper knob: T1 time range setting Setting of T1 time range. Centre top knob: Time T1 setting on relative scale: 1 to 10 with respect to the chosen range. Centre bottom knob: Setting of T2 time range. Lower knob: Time T2 setting on relative scale: 1 to 10 with respect to the chosen range. 17.5 x 81 x 67.2 mm PA66 Approx 100 g Max. 0.5 Nm according to IEC EN 60947 Yes Electromagnectic Compatibility According to EN 61000-6-2 According to EN 61000-6-3 Operation Diagrams Function Aa - Asymmetrical Recycler - ON first Function Ab - Asymmetrical Recycler - OFF first Power supply Power supply Relay ON ON Relay ON OFF LED Wiring Diagram ON OFF LED Dimensions 17.5 67.2 2 2 www.dold-relay.com 45 81 18.7