DISCRETE SEMICONDUCTORS DATA SHEET PMBT3640 PNP 1 GHz switching transistor Product specification File under Discrete Semiconductors, SC14 September 1995 Philips Semiconductors Product specification PNP 1 GHz switching transistor DESCRIPTION PMBT3640 PINNING PNP general purpose switching transistor in a SOT23 package. PIN DESCRIPTION 3 fpage Code: V25 1 base 2 emitter 3 collector 1 2 Top view MSB003 Fig.1 SOT23. LIMITING VALUES In accordance with the Absolute Maximum System (IEC 134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT −VCBO collector-base voltage open emitter − 12 V −VCEO collector-emitter voltage open base − 12 V −VEBO emitter-base voltage open collector − 4 V −IC DC collector current − 80 mA Ptot total power dissipation − 350 mW Tstg storage temperature −55 150 °C Tj junction temperature − 175 °C up to Ts = 85 °C (note 1) THERMAL RESISTANCE SYMBOL Rth j-s PARAMETER from junction to soldering point (note 1) 260 K/W Note 1. Ts is the temperature at the soldering point of the collector tab. September 1995 THERMAL RESISTANCE 2 Philips Semiconductors Product specification PNP 1 GHz switching transistor PMBT3640 CHARACTERISTICS Tj = 25 °C unless otherwise specified. SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT Off characteristics −V(BR)CBO collector-base breakdown voltage −IC = 100 µA; IE = 0 12 − V −V(BR)CES collector-emitter breakdown voltage −IC = 100 µA; VBE = 0 12 − V −V(BR)EBO emitter-base breakdown voltage −IE = 100 µA; IC = 0 4 − V −ICES collector cut-off current −IB base current −VCE = 6 V; VBE = 0 − 0.01 µA −VCE = 6 V; VBE = 0; Tamb = 65 °C − 1 µA −VCE = 6 V; VBE = 0 − 10 nA −IC = 10 mA; −VCE = 0.3 V 30 120 −IC = 50 mA; −VCE = 1 V 20 − On characteristics; pulse test: pulse width ≤ 300 µs, duty cycle ≤ 2%. hFE −VCEsat −VBEsat DC current gain collector-emitter saturation voltage base-emitter saturation voltage −IC = 10 mA; −IB = 1 mA − 0.2 V −IC = 50 mA; −IB = 5 mA − 0.6 V −IC = 10 mA; −IB = 1 mA; Tamb = 65 °C − 0.25 V −IC = 10 mA; −IB = 0.5 mA 0.75 0.95 V −IC = 10 mA; −IB = 1 mA 0.8 1 V −IC = 50 mA; −IB = 5 mA − 1.5 V Small-signal characteristics fT transition frequency −IC = 10 mA; −VCE = 5 V; f = 100 MHz 500 − MHz Cc output capacitance IE = 0; −VCB = 5 V; f = 1 MHz − 3.5 pF Ce input capacitance IC = 0; −VEB = 0.5 V; f = 1 MHz − 3.5 pF Switching times td delay time −VCC = 6 V; −IC = 50 mA; −VBE(off) = 1.9 V; −IB1 = 5 mA − 10 ns ts storage time −VCC = 6 V; −IC = 50 mA; −IB1 =−IB2 = 5 mA − 20 ns tr rise time −VCC = 6 V; −IC = 50 mA; −VBE(off) = 1.9 V; −IB1 = 5 mA − 30 ns tf fall time −VCC = 6 V; −IC = 50 mA; −IB1 = −IB2 = 5 mA − 12 ns ton turn-on time −VCC = 6 V; −IC = 50 mA; −VBE(off) = 1.9 V; −IB1 = 5 mA − 25 ns −VCC = 1.5 V; −IC = 10 mA; −IB1 = 0.5 mA − 60 ns −VCC = 6 V; −IC = 50 mA; −VBE(off) = 1.9 V; −IB1 = IB2 = 5 mA − 35 ns −VCC = 1.5 V; −IC = 10 mA; −IB1 = IB2 = 0.5 mA − 75 ns toff turn-off time September 1995 3 Philips Semiconductors Product specification PNP 1 GHz switching transistor PMBT3640 PACKAGE OUTLINE Plastic surface mounted package; 3 leads SOT23 D E B A X HE v M A 3 Q A A1 1 2 e1 bp c w M B Lp e detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 max. bp c D E e e1 HE Lp Q v w mm 1.1 0.9 0.1 0.48 0.38 0.15 0.09 3.0 2.8 1.4 1.2 1.9 0.95 2.5 2.1 0.45 0.15 0.55 0.45 0.2 0.1 OUTLINE VERSION REFERENCES IEC JEDEC EIAJ ISSUE DATE 97-02-28 SOT23 September 1995 EUROPEAN PROJECTION 4 Philips Semiconductors Product specification PNP 1 GHz switching transistor PMBT3640 DEFINITIONS Data Sheet Status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. September 1995 5