BNC Style Connector BNC Series FEATURE Frequency Range DC to 2GHz Characteristic Impedance 50 Ω Lock Type Bayonet ・ BNC style connector is one of the most popular 50 Ω coaxial connector. ・ Bayonet coupling mechanism for reliable connection. It is suitable for the frequent connection ・When you use 75 Ω cable, the frequency shall be less than 200MHz. When the frequency is more than 200MHz, please chose BNC75 series. ・ BNC75 series (75 Ω type BNC style connector) can be mated. CONFORMING STANDARD JIS-C-5412, MIL-PRF-39012, DSP-C-6202 SPECIFICATIONS Characteristic Impedance Rated Voltage Dielectric Withstanding Voltage 50 Ω 500VAC(r.m.s.) 1500V AC(r.m.s.) for 1 minute Contact Resistance 3m Ω Max. Operating Temperature -55 〜 +85℃ Insulation Resistance V.S.W.R. 1000M Ω Mim. at 500V DC 1.3 max. at DC to 2GHz ＊ The specifications are typical but may not apply to all connectors. And if the cable is not 50 Ω , the specification will be changed. Please check the specifications on each item with its drawing from us when you use. MATERIAL/FINISH Item RoHS Compliant Compliant Material / Finish Shell (Body) Copper Alloy / Ni or Ag Plating Contact (Female) Copper Alloy / Ag or Au Plating Contact (Male) Insulator Gasket Copper Alloy / Ag or Au Plating PTFE Silicon Rubber ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. 121226 http://www.ddknet.co.jp BNC Series Unit：mm ○ Sraight Cable Plug プラグ 3D-2V 3C-2V 3D-2V BNC-P-3-Ni-CF 3C-2V （L） BNC-P-3-NiCAu-CF RG-58/U RG-55/U BNC-P-58U-Ni-CF Ag 1 6.4 25.0 Ni Au 1 5.4 27.0 Ag Ag 1 5.4 27.0 Ni Ag 1 BNC-P-62U-Ni-CF RG-62/U 6.6 26,2 Ni Ag 1 6.55 24.6 Ag Ag 1 6.55 24.6 Ni Ag 1 RG-59/U RG-62/U RG-59/U RG-62/U BNC-P-3W Applicable Finish Assembly Center Instruction Conductor Conductor BNC-P-1.5CQEW-CR10 φA 3C-2W BNC-P-3W-Ni-1-CF 3D-2W 3C-2W 7.1 29.1 7.1 29.1 φ14.5 3D-2W BNC-P-3W-CF φA （L）Outer φ14.5 Cable Applicable Part Number Cable 5D-2V BNC-P-5-CF 5C-2V （L） 5D-2V BNC-P-5-Ni-CF 5C-2V 5D-2W BNC-P-5W-CF 5C-2W 5D-2W BNC-P-5W-Ni-CF Ag Ag 1 Ni Ag 1 （L） （L） 8.6 37.0 Ag Ag 1 8.6 37.0 Ni Ag 1 9.2 37.0 Ag Ag 1 9.2 37.0 Ni Ag 1 φ14.5 ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. （L） Please confirm the content with the latest delivery specifications when you use the product. （31.7） （L） http://www.ddknet.co.jp 2 Finish Assembly Center Instruction Conductor Conductor φA （L）Outer 5C-2W BNC-P-1.5CQEW-CR10 φA φ14.5 φ14.5 BNC-P-1.5CQEW-CR10 BNC-P-1.5V-CR-CF φA Ni （L） 1 φA φ14.5 φ14.5 φ14.5 （L） φA 6.4 25.0 BNC-P-3C-CR1 φA φA φ17.5 BNC-P-5 1 Ag （31.7） （L） Ag Ag Part Number （L） Ag 6.6 26.2 UG-260/U-Ni-CF φ14.5 φ14.5 φA φA φA BNC-P-1.5V-CR-CF 6.4 25.0 RG-62/U BNC-P-3W BNC-P-3 Assembly Center Instruction Conductor Conductor BNC-P-62U ー CF φ14.5 φA φ17.5 プラグ RG-58/U UG-260/U-CF （L） 3C-2V RG-55/U BNC-P-58U-CF BNC-P-5 3D-2V BNC-P-3W Finish φA （L）Outer φ14.5 Cable BNC-P-3-CF φ14.5 φA Applicable Part Number φA Clamp Type BNC-P-3 φ14.5 φA φ17.5 BNC-P-5 BNC Series Unit：mm BNC-P-3W ○ Straight Cable Plug Crimp Type （L） BNC-P-3W Applicable Part Number Cable （L） BNC-P-1.5CQEW-CR10 φA 1.5D-2V BNC-P-1.5V-CR-CF （31.7） 1.5C-2V 1.5D-2V φA φ14.5 φA φA φ14.5 BNC-P-1.5V-CR-CF BNC-P-1.5V-CR-Ni-CF 1.5C-2V 1.5D-2V （L） BNC-P-1.5V-CR-NiCAu-CF 1.5C-2V 2.5D-2V BNC-P-2.5V-CR-CF 2.5C-2V 2.5D-2V BNC-P-2.5V-CR-Ni-CF 2.5C-2V BNC-P-5 BNC-P-3C-CR1 2.5D-2V φA φA φ14.5 φ14.5 BNC-P-2.5V-CR-NiCAu-CF φ17.5 Finish Assembly Outer Center Instruction Conductor Conductor φA 2.5C-2V 5.5 Ag 5.5 （L） Crimp Tool Ag 3 CR-H-1100 φ14.5 BNC-P-3 φ14.5 φA プラグ φ14.5 （L） Ni Ag 3 CR-H-1100 5.5 Ni Au 3 CR-H-1100 5.5 Ag Ag 3 CR-H-1100 5.5 Ni Ag 3 CR-H-1100 5.5 Ni Au 3 CR-H-1100 BNC-P-179U-CR-CF RG-179/U 5.5 Ag Ag 3 CR-H-1100 BNC-P-179U-CR-Ni-CF RG-179/U 5.5 Ni Ag 3 CR-H-1100 Cable BNC-P-1.5CQEW-CR10-CF 1.5C-QEW BNC-P-58U-CR10-CF （31.7） 24.3 Crimp Tool Note Ni Au ー CR-H-1100 BNC-P-1.5CQEW-CR10 4.0 23.3 Ni Au 4 CR-H-1120A Delta-mate 1.5D-QEW BNC-P-3C-CR10-BOOT-CF BNC-P-3D-CR10-BOOT-CF 5.5 Finish Assembly Center Instruction Conductor Conductor φA （L）Outer 1.5D-XV BNC-P-1.5D-CR10-CF φ14.5 φA Applicable Delta-mate 3C-2V 7.1 24.3 Ni Au 4 CR-H-1116 Delta-mate 3D-2V 7.1 24.3 Ni Au 4 CR-H-1116 Delta-mate 6.3 RG-58A/U（L） 24.3 Ni Au 4 CR-H-1115 Delta-mate 24.3 Ni Au 4 CR-H-1116 Delta-mate RG-58/U BNC-P-3D-CR10-CF 3D-2V 7.1 φ14.5 BNC-P-1.5V-CR-CF（L） Part Number φA φA φ14.5 （L） （L） BNC-P-1.5CQEW-CR10 φA φ14.5 BNC-P-3C-CR1 （L） Part Number Applicable Cable Finish Assembly Center Instruction Conductor Conductor φA （L）Outer Crimp Tool BNC-P-3C-CR1-CF 3C-2V 7.0 28.0 Ag Ag 2 CR-H-1102 BNC-P-3C-CR1-Ni-CF 3C-2V 7.0 28.0 Ni Ag 2 CR-H-1102 ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 3 BNC-LP-3 BNC Series Unit：mm 80% ○ Right Angle Cable Plug BNC-LP-5 Clamp Type Cable 3D-2V 3C-2V 3D-2V （27） （25） BNC-LP-3-CF BNC-LP-3-CAu-CF 3C-2V 3D-2V BNC-LP-3-NiCAu-CF φA 3D-2V BNC-LP-3-Ni-CF 3C-2V RG-55/U BNC-LP-58U-CF BNC-LP-5 RG-58/U RG-55/U BNC-LP-58U-Ni-CF ジャック BNC-J-3 パネルジャック BNC-PJ-3 RG-58/U RG-55/U φA BNC-LP-55U-CF ライトアングルプラグ 3C-2V （33） （33） 0% 4-φB RG-58/U Finish Assembly Center Instruction Conductor Conductor φA Outer 6.4 Ag Ag 5 6.4 Ag Au 5 6.4 Ni Au 5 6.4 Ni Ag 5 5.38 Ag Ag 6 5.38 Ni Ag 6 5.4 Ag Ag 6 BNC-LP-5 Applicable φA （L） 2.3 （27） 12.7 80% BNC-LP-3 Part Number 15.8 （L） BNC-LP-5-CF Cable 12.7 5D-2V 5D-2V 4-φ3.0 0 BNC-LP-5-Ni-CF +0.1 φ11.5 0 ○ Straight Cable Jack φA 5C-2V Center Conductor Assembly Instruction Ag Ag 7 Ni Au 7 12.7 0.05 （27） （25） （33） Finish Outer Conductor 5C-2V +0.1 12.7 0.05 （33） パネルジャック BNC-PJ-3 -3 （33） Clamp Type パネルジャック BNC-PJ-3 Applicable 4-φB 3D-2V BNC-J-3-CF +0.1 12.7 0.05 φA （L） +0.1 φ11.5 0 BNC-J-3-Ni-CF 2.3 6.4 3C-2V 4-φ3.0 0 15.8 BNC-J-58U-CF （L） 3D-2V 3C-2V RG-55/U 12.7 RG-58/U Ag Ag 1 6.4 28.5 Ni Ag 1 5.4 28.6 Ag Ag 1 +0.1 4-φ3.0 0 12.7 0.05 12.7 0.05 ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. +0.1 Please confirm the content with the latest delivery specifications when you 0use the product. φ11.5 http://www.ddknet.co.jp 4 12.7 0.05 Finish Assembly Center Instruction Conductor Conductor (L) Outer 28.5 12.7 12.7 φA Cable □17.5 Part Number φA （L） 15.8 12.7 ジャック BNC-J-3 2.3 □17.5 4-φB φA ） Applicable Part Number □17.5 ライトアングルプラグ （33） BNC Series Unit：mm ○ Straight Panel Cable Jack Clamp Type パネルジャック BNC-PJ-3 4-φB （L） 15.8 Cable 3C-2V 3D-2V BNC-PJ-3-Ni-CF 12.7 3C-2V RG-55/U BNC-PJ-58U-CF +0.1 RG-58/U 4-φ3.0 0 RG-55/U 12.7 0.05 BNC-PJ-58U-Ni-CF +0.1 φ11.5 0 φA φB 3D-2V BNC-PJ-3-CF □17.5 12.7 φA 2.3 Applicable Part Number RG-58/U BNC-PJ-58U-NiCAu-CF RG-55/U RG-58/U Finish Assembly Center Instruction Conductor Conductor (L) Outer 6.4 3.0 28.5 Ag Ag 1 6.4 3.0 28.5 Ni Ag 1 5.4 3.0 28.5 Ag Ag 1 5.4 3.0 28.5 Ni Ag 1 5.4 3.0 28.5 Ni Au 1 12.7 0.05 Panel Mounting Dimensions ○ Receptacle Jack BNC-R-CF レセプタクル +0.1 4-φ3.0 0 15.8 26.3 4-φB BNC-LR-Ni 2.3 +0.1 4-φ3.0 0 12.7 0.05 +0.1 φ9.0 0 □17.5 12.7 Ni Ag Ag Ag UG-290/U-Ni-1-CF M2.6 Ni Ag 4-φ3.2 Part Number 12.7 φ9.0 +0.1 5-φ1.2 0 10.16 0.05 2.3 13.3 10.16 0.05 2.5 5.08 0.025 □15.0 2.3 +0.1 10.16 0 5 Finish Center Outer Conductor Conductor BNC-LR-CF Ag Ag BNC-LR-Ni-CF Ni Ag 12.7 5.08 0.025 □15.0 3.1 M2.6 +0.1 might change by the improvement etc. without notice. ◎ Please acknowledge that the specification etc. of this catalog 0 13.3 2.5 5-φ1.2 Moreover, the characteristic and the specification of the published product are the reference values. 5.08 0.05 Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp Ag BNC-R-Ni-CF Panel Mounting Dimensions BNC-R-PC-4 Ag UG-290/U-CF 12.7 23 □17.5 12.7 3.1 12.7 23 φ9.0 23 23 Center Conductor Conductor 4-φ3.2 4-φ3.0 BNC-R-PC-4 Finish 12.7 0.05 BNC-LR-Ni 12.7 φB Outer Panel Mounting Dimensions 12.7 4-φ3.0 □17.5 15.8 26.312.7 BNC-R-CF 12.7 0.05 +0.1 φ9.0 0 12.7 □17.5 12.7 φ1.4 2.3 12.7 BNC-R-CF レセプタクル Part Number 12.7 0.05 φ1.4 4-φB ○ Receptacle Jack 12.7 φ9.0 23 □17.5 12.7 BNC Series Unit：mm 12.7 23 BNC-R-PC-4 10.16 0.05 2.3 13.3 2.5 Finish Part Number 5.08 0.025 □15.0 +0.1 5-φ1.2 0 Center Outer Conductor Conductor Note BNC-R-PC-4-Ag-CF Ni Ag Board lock is Ag plating BNC-R-PC-4-D1-CF Ni Au Board lock is Ag plating. 5.08 0.05 +0.1 10.16 0 PCB Mounting Dimensions レセプタクル -2 BNC-LR-PC-4-Ag 23 BNC-LR-PC-4-Ag 2.5 Center Outer Conductor Conductor Note BNC-LR-PC-4-Ag-CF Ni Ag Board lock is Ag plating BNC-LR-PC-4-NiCAu-CF Ni Au Board lock is Ag plating 5.08 0.025 +0.1 10.16 0 10.16 0.05 +0.1 0.05 5.08 5-φ1.2 0 19.1 10.16 PCB Mounting Dimensions 23 □15.0 10.16 10.16 0.05 レセプタクル -2 Finish Part Number 5.08 0.025 +0.1 5-φ1.2 0 10.16 □15.0 10.16 BNC-PR 2.5 4-φ3.0 +0.1 0 4-φ3.0 0.05 5.08 φ1.1 19.1 +0.1 +0.1 （17.7） （28.2） φ9.0 0 12.7 4-φ3.0 □17.5 2.3 +0.1 （17.7） （28.2） φ9.0 0 12.7 Ag BNC-PR-Ni-CF Ni Ag Hex Dia.12.7 φ1.4 BNC-625/U Hex Dia.12.7 10.3 26.3 1.5 12.6 φ12.7 BNC-RB2 Ag Panel Mounting Dimensions +0.1 φ11.3 0 26.3 1.5 BNC-625/U 26.3 12.6 Hex Dia.12.7 +0.1 φ11.3 0 10.3 φ12.7 φ1.4 +0.1 ◎ Please acknowledge that the1.5 specification etc. of this catalog might change by the improvement etc. without notice. φ11.3 0 Moreover, the characteristic12.6 and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 6 Finish Outer Center Conductor Conductor BNC-PR-CF 12.7 0.05 φ12.7 φ1.4 Hex Dia.12.7 □17.5 バルクヘッドレセプタクル Part Number 12.7 0.05 12.7 バルクヘッドレセプタクル BNC-RB2 +0.1 4-φ3.0 0 12.7 0.05 φ1.1 2.3 10.3 BNC-PR 12.7 0.05 12.7 10.16 0 12.7 φ9.0 0 +0.1 φ9.0 0 □17.5 12.7 12.7 0.05 □17.5 BNC Series 12.7 0. 1 （17.7） （28.2） 2.3 （17.7） （28.2） 12. 2.3 Unit：mm 12.7 0.05 バルクヘッドレセプタクル ○ Straight Bulkhead Cable Jack BNC-RB2 バルクヘッドレセプタクル BNC-RB2 φ1.4 Hex Dia.12.7 26.3 1.5 12.6 +0.1 φ11.3 0 Panel Thickness：1.2 〜 3.5 BNC-625/U 10.3 +0.1 φ11.3 0 10.3 1.5 12.6 φ12.7 φ1.4 φ12.7 Hex Dia.12.7 26.3 BNC-625/U Part Number Finish Outer Center Conductor Cnductor BNC-RB2-CF Ag Ag BNC-RB2-Ni-CF Ni Ag BNC-RB2-NiCAu-CF Ni Au Panel Mounting Dimensions φ1.4 Hex Dia.12.7 26.3 +0.1 φ11.3 0 1.5 10.3 26.3 10.3 1.5 12.6 Part Number φ12.7 φ1.4 φ12.7 Hex Dia.12.7 +0.1 φ11.3 0 12.6 Finish Outer Center Conductor Conductor UG-625/U-CF Ag Ag UG-625/U-Ni-CF Ni Ag Panel Thickness：1.2 〜 3.5 Panel Mounting Dimensions バルクヘッドレセプタクル -3 UG-604/U バルクヘッドレセプタクル -3 +0.1 Hex Dia.12.7 φ9.6 0 1.0 13.7 26.3 Hex 1.0Dia.12.7 φ14.3 φ1.1 Part Number +0.1 Hex Dia.12.7 バルクヘッドレセプタクル -3 UG-604/U φ9.6 0 φ14.3 φ1.1 UG-604/U UG-604/U-CF UG-604/U-Ni-1-CF +0.1 8.5 0 Ag +0.1 13.7 Hex Dia.12.7 26.3 φ1.3 33 UG-1094/U Hex 2.44 Dia.12.7 15.1 33 Hex Dia.12.7 +0.1 8.5 0 +0.1 φ9.92 0 +0.1 8.5 0 Part Number Finish Outer Center Conductor Conductor UG-657/U-CF Ag Ag UG-657/U-Ni-CF Ni Ag Note Independent Waterproof with Frange O-ring Independent Waterproof with Frange O-ring φ1.3 BNC-RBP1Panel +0.1 φ9.6 0 +0.1 +0.1 8.8 0 8.8 0 φ12.7 φ12.7 1.2 Hex11.9 Dia.12.7 27 2.5 Thickness：2.2 〜 15.2 32.6 Hex Dia.12.7 2.5 +0.1 φ9.6 0 +0.1 8.5 0 +0.1 φ9.6 0 +0.1 φ9.6 0 +0.1 8.8 0 φ1.3 BNC-RBP1 φ12.7 φ1.6 BNC-RBP1 φ14.5 UG-1094/U 2.44 Hex Dia.12.7 15.1 33 1.2 11.9 27 1.2Dia.12.7 Hex 11.9 27 Hex Dia.12.7 φ14.5 φ1.6 Panel Thickness：2.2 〜 6.0 Panel Mounting Dimensions φ1.6 UG-1094/U 2.44 15.1 +0.1 +0.1 8.5 0 φ9.92 0 φ14.5 φ1.3 UG-657/U +0.1 φ9.92 0 φ14.5 1.0 8.5 0 φ14.3 φ1.3 UG-657/U Part Number Ag Ag UG-1094/U-D1-CF Ni Au +0.1 φ9.6 0 +0.1 Dimensions 3.1 Panel Mounting 8.5 0 +0.1 φ9.6 0 φ14.5 φ1.3 http://www.ddknet.co.jp 4.4 4.7 2.5 Hex Dia.12.7 15.2 32.6 Hex Dia.12.7 +0.1 +0.1 0 φ9.6 8.5 0 7 +0.1 Finish Outer Center Conductor Conductor UG-1094/U-CF +0.1 ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. 15.2 8.5 0 Moreover, the32.6 characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. φ1.1 Ag Ni φ9.6 0 φ14.5 φ1.1 26.3 Hex Dia.12.7 BNC-RB Ag Panel Thickness：0.7 〜 2.4 Panel Mounting 13.7 +0.1Dimensions UG-657/U BNC-RB Finish Outer Center Conductor Conductor +0.1 +0.1 Hex Dia.12.7 Hex Dia.12.7 φ12.7 φ12.7 BNC Series 1.2 ○ Straight Bulkhead Cable Jack 1.2 +0.1 0 φ9.6+0.1 φ9.6 0 11.9 2711.9 27 BNC-RBP1 BNC-RBP1 +0.1 φ1.3 φ1.3 φ14.5 φ14.5 +0.1 0 8.5+0.1 8.5 0 Ag Ag BNC-RBP1-Ni-CF Ni Ag 0 φ9.6 +0.1 φ9.6 0 φ14.4 φ14.4 φ14.7 φ14.7 φ1.1 φ1.1 BNC-RBP1-CF +0.1 Hex Dia.12.7 Hex Dia.12.7 2.3 2.3 17.4 33 17.4 33 Finish Outer Center Conductor Conductor Note Independent Waterproof with Frange O-ring Independent Waterproof with Frange O-ring Panel Mounting Dimensions Panel Thickness：2.6 〜 6.4 BNC-RB BNC-RB Part Number 0 φ9.6 +0.1 φ9.6 0 Hex Dia.12.7 Hex Dia.12.7 2.5 2.5 15.2 32.615.2 32.6 Unit：mm 0 0 8.8 8.8 φ1.6 φ1.6 UG-1094/U UG-1094/U +0.1 Part Number Finish Outer Center Conductor Conductor Note BNC-RB-CF Ag Ag with Frange O-ring BNC-RB-Ni-CF Ni Ag with Frange O-ring 0 8.5+0.1 8.5 0 Panel Thickness：2.2 〜 7.0 Panel Mounting Dimensions ○ Dust Cap Marking JCW-159/U-CF/DDK (17.8) (57) (90) (20.5) ) .7 3 表示 (φ BNC-JC-CF/DDK Part Number Finish Part Number Finish BNC-CS-CF Ag Short Cap BNC-JC-CF Ag BNC-CS-Ni-CF Ni Short Cap BNC-JC-Ni-CF Ni （φ3.5） Part Number BNC style mating side 適合コネクタ：BNC形プラグ 60 5 (75) Finish BNC-RC-3 Ni BNC-RC-3-D1 Ag Marking：DDK BNC-JC-CF 2582-CF BNC-CS-CF ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. 2559-CF Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 8 BNC Series Unit：mm ○ Assembly Instruction（1） Parts Configulration MIL Clamp MIL Clamp Clamp Gasket Gasket Nut Nut Washer Washer Clamp Gasket Gasket Clamp Clamp Male Contact Male Contact A Plug Body Plug Body Female Contact Jack Body Jack Body ① Cut the cable as fig.1. A ① Female Contact Please be carefule to not damage the outer conductor. Applicable Cable Washer Gasket Clamp Nut Washer Gasket Clamp Nut A 5D-2V, RG-59/U, RG-62/U ② 10mm 3D-2V, 5D-2W RG-55/U, RG-58/U 15mm 3D-2W 12mm ② Insert the nut, washer, gasket and clamp. ● The clamp is located on the outer conductor of the cable. Pick the outer conductor. ③ Cut the insulator and center conductor as fig.3. Fold up the outer conductor to the clamp equally and C ③ cut the outer conductor of the cable along the clamp B C as fig.3. ● Please be careful to not damage the center conductor. B No Gap ④ Applicable Cable Soldering No Gap Soldering B 3D-2V, 3D-2W, RG-55/U, RG-58/U Contact 6mm 3mm 7mm 5mm RG-59/U, RG-62/U 5.5mm 3mm 5D-2W 7.2mm 5.4mm 5D-2V Contact C ④ Solder up the contact to the center conductor. ● Please be careful to not be swelled up the solder. ● Please be careful to not gap between contact and ⑤ insulator. ● Please be careful to not deform the insulator by Body Cable assembly soldering Body Cable assembly ⑤ Insert the body into the above cable assembly and screw up the nut. ● Please screw up the nut by wrench tightly. Hex Dia.：９． ５ Dia.：９． ５ Hex Dia.：９． ５ Dia.：９． ５ Applicable Cable Recommended Tightening Torque 3D-2V, RG-55/U, RG-58/U 117.6 〜 147N・cm(12 〜 15kgf・cm) RG-59/U, RG-62/U, 3D-2W 196N・cm(20kgf・cm) 5D-2V 441N・cm(45kgf・cm) 5D-2W 490 〜 686N・cm(50 〜 70kgf・cm) ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 9 BNC Series Unit：mm ○ Assembly Instruction（2） Parts Configulration Boot Boot Ferule Ferule Center Conductor Center Conductor Body Body 15mm ① Insert the boot, ferule into the cable and cut the ① cable as fig.1. 15mm ● Please be careful to not damage the outer conductor. 13.3mm ② ② Cut the insulator and outer conductor as fig.2. Pre-solder the center conductor and cut as fig.2. 13.3mm ● When cutting the insulator, please be careful to not 6.6mm damage 10.6mm the center conductor. 6.6mm 10.6mm ③ Solder up the contact to the center conductor. ③ Spread the end of the outer conductor to insert the body between insulator and outer conductor easily. Please do not pick the outer conductor. ● Please be caredule to not be swelled up the solder. Shave the excessed solder along the outside of the contact. ● Please be careful to not deform the insulator by soldering. ④ ④ Insert the body into the cable between insulator and outer conductor until the top of the contact is on the Edge of Crimp Dies same plane Edge of Body Edge of Crimp Dies A B Edge of Body B A with the top of the body and move the ferule to the body. Crimp the ferule at position A 0.5∼1.0mm and position B . 0.5∼1.0mm ⑤ ⑤ Cover the boot on the ferule. Boot Boot ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 10 BNC Series Unit：mm ○ Assembly Instruction（3） Parts Configulration （for 2.5D-2V） （for 2.5D-2V） (for 1.5D-2V / RG-179B/U) (for 1.5D-2V / RG-179B/U) Ferule Contact Assembly Ferule ① ● Please be careful to not damage the outer conductor. Inserting Tool Ferule Inserting Tool Ferule 2.5D-2V Plug Body ① Cut the cable as fig.1. 20mm 20mm ② Plug Body Contact Assembly ② Insert the ferule. ● In case of 2.5D-2V cable, insert the ferule into the cable and push the ferule between sheath and outer conductor until the head of ferule is reached to the sheath by 2.5D-2V inserting tool(E3001-160) and pick the outer conductor. ● In case of 1.5D-2V or RG-179B/U cable , insert the Ferule 1.5D-2V,RG-179B/U ferule until the ferule reached at the sheath and pick the Ferule 1.5D-2V,RG-179B/U outer conductor. cut the couter conductor along the ferule as fig.3. Cut the insulator and center conductor and pre-solder 10mm 17mm A ③ ③ Folding down the outer conductor to the ferule and 17mm A 10mm the center conductor. Applicable Cable ④ A 2.5D-2V 4mm 1.5-2V, RG-179B/U 5mm Soldering Soldering ④ Insert the contact assembly into the above cable assembly. Solder up the contact with center conductor 1mm 1mm crimping and crimp the root of the contact assembly. crimping ⑤ Insert the body into the above cable assembly and ⑤ screw up the body by the wrench tightly. Recommended Tightening Torque : 196 N･cm(20kgf･cm) ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 11 BNC Series Unit：mm ○ Assembly Instruction（4） Parts Configulration Body Crimp Crimp area Bayonet Body Crimp Ferule Contact BNC-P mating side (24.3) (24.3) ① Cut the cable as fig.1. L Cable L Cable ② L Amm=Lmm-12mm ② Remove the sheath LA ● Please be careful to not damage the outer LA conductor. 15 15 ③ Insert the ferule and spread the tip of the outer Assembly Tool Sleeve CR-H-1115 Ferule CR-H-1116 Sleeve Ferule B ④ (24.3) BNC-P mating side (24.3) (24.3) ③ Delta-mate Outer Conductor (24.3) *The insulator is attached *Insulator Ferule Sleeve with BNC-P-1.5D-CR10-CF. Contact Please cover the sheath when crimping the contact. ① Insulator Delta-mate Outer Conductor Crimp area *Insulator Sleeve Insulator Bayonet 89141 ④ Cut the center conductor by stripper as fig.4. B C ⑤ conductor. Plunge the sleeve by stripper without diging the edge. 89134 C Stripper B CR-H-1120A Attachment ⑤ Cut the insulator by stripper as fig.5. Insert the stripper and dig the edge to the B insulator. Rotate the stripper a few times and pull Stripper A D A off the insulator. ⑥ Trim the extra outer conductor along the sleeve. D ⑦ Put the contact into the crimp tool attachment and ⑥ insert it into the crimp dies as fig.7. Insert the ⑦ center conductor into the contact hole and crimp the contact with touching the contact brim to the end of sheath. ⑧ ⑧ Insert the above contact assembly into the body until the top of contact is same plane as rim of outer conductor. ● After the contact brim is inserted into the body, do not rotate the cable and body. ⑨ ⑨ ⑨ Put the above cable assembly in the crimp tool and crimp the root of the body. ● Please match the hex of dies with the hole of the body. for CR-H-1120A ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 12 Nut2 BNC Series Unit：mm ○ Assembly Instruction（5） Nut1 Washer Parts Configulration Nut1 Clamp Gasket Washer Gasket Body Assembly Clamp Cable Nut2 Body Assembly Cable length require for the single ended cable assembly L =L1+0.3 ① Cable L1 Washer Sheath Outer Conductor （Pre-soldering） L1 Nut1 Gasket Washer Sheath 1-1.Cut the cable as fig.1. 1-2. Pre-sollder the center conductor. Note）Please be careful to not damage the outer conductor. 1-3．Insert the nut 1, washer and gasket. Center Conductor 2 0.3 8 0.3 Outer Conductor Center Conductor （Pre-soldering） ② 2 0.3 Clamp Nut1 Gasket Sheath Clamp Cut the outer conductor Sheath along the clamp ③ Cable Assembly 2-1.Insert the clamp into the outer conductor and put it on the sheath. 2-2. Pick the outer conductor and fold down to the clamp and cut the extra outer conductor along the clamp. 8 0.3 Insulator Outer conductor Insulator Nut1 Cut the outer conductor along the clamp 9.5 （Hex Dia.）Nut1 Cable Assembly Outer conductor 3-1.Insert the above cable assembly into the body. 3-2.Screw up the nut1 to the body. Recommended screw toque：117.6 〜 147N・㎝ （12 〜 15kgf・㎝） □12.7 Body Assembly 9.5 （Hex Dia.） ④ Body Assembly Center Conductor Nut2 □12.7 Soldering Nut2 Contact Center Conductor 4-1.Solder up the contact with the center conductor 4-2.Screw up the nut2 to the body. Recommended screw torque：49N・㎝ （5kgf・㎝） Soldering Body Assembly Contact ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp Body Assembly 13 BNC Series Unit：mm ○ Assembly Instruction(6） Parts Configulration Nut1 Washer Gasket Clamp Nut2 Nut1 Washer Gasket Clamp Body Assembly Nut2 Body Assembly The cable length require for the single ended cable assembly. L1 =L+3.3 Cable Cable L ① Nut1 Washer L Gasket Outer Conductor Nut1 Washer Gasket Outer Conductor 11 Cable ② Cable 1-1.Insert the nut1, washer and gasket. 1-2. Cut the cable as fig.1. Note）Please be careful to not damage the outer conductor. 2-1.Insert the clamp into the outer conductor and move to the sheath. 2-2.Pick the outer conductor equally. Fold down to the clamp and cut the extra outer conductor along the clamp. 3-3.Cut the insulator as fig. 2. 2-4.Pre-solder the center conductor and cut the center conductor as fig.2. 11 Clamp Insulator Clamp Insulator Center Conductor (Pre-soldering) Center Conductor (Pre-soldering) 2 0.3 (3) 0.3 5 Cut the outer conductor 2 0.3 (3) along the clamp 5 0.3 Cut the outer conductor along the clamp Contact Slit ③ 3-1.Insert the above contact assembly into the body assembly. Note）The center conductor is located in the center of contact slit. 3-2.Move the nut1, washer and gasket to the body. 3-2.Screw up the nut1 to the body. Recommended screw torque：117.6 〜 147N・㎝ （12 〜 15kgf・㎝） Contact Slit Cable Assembly Cable Assembly □12.7 □12.7 9.52 (Hex Dia.) 9.52 Body Assembly (Hex Dia.) ④ Body Assembly 4-1.Solder up the contact with center conductor. Soldering Soldering ⑤ Nut2 5-1.Screw up the nut2 to the body. Recommended screw torque：49N・㎝ min. （5kgf・㎝ min.） Nut2 ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 14 BNC Series Unit：mm ○ Assembly Instruction（7） Nut２ Parts Configulration Nut２ Washer１ Nut１ Washer２ Body Assembly Washer２ Clamp Body Assembly Clamp Washer１ Nut１ The cable length require for the single ended cable assembly ：L1 L1 =L+3 Ｌ Ｌ Sheath ① Sheath 1-1.Cut the cable as fig.1. Note）Please be careful to not damage the outer conductor. Outer Conductor 15 0.5 Cable ② Outer Conductor Nut１ Clamp Cable Washer１ 2-1.Insert the nut1, washer1 and insert the clamp on the outer conductor and move to the Clamp Outer Conductor sheath. 2-2. Fold down to the clamp and cut the extra outer conductor in 3 mm from the clamp. 2-3.Move the washer 1 and nut 1 to the clamp. 15 0.5 Outer Conductor Washer１ Nut１ 3 Washer２ ③ Insulator 3 Outer Conductor Washer２ Insulator （Pre-soldering） Outer Conductor 3-1.Insert （Pre-soldering） +0.5 0 5.7 0 +0.5 Contact Slit ④ 4 -0.5 5.7 0 0 4 -0.5 Contact Slit 4-1.Insert the above cable assembly into the bodyassembly and screw up the nut 1. Recommended screw torque：196N・㎝（20kgf・㎝） Note）The center conductor is located in the Body Assembly center of contact slit. Body Assembly Nut２ ⑤ washer 2 on the outer conductor and cut the insulator as fig.3. 3-2. Pre-solder the center conductor and cut the center conductor as fig.3. Soldering Nut２ 5-1.Solder Soldering up the contact with center conductor. 5-2.Screw up the nut 2 to the body. Recommended screw torque：49N・㎝（5kgf・㎝） ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 15