CDCS503-Q1 www.ti.com SCAS924B – MARCH 2012 – REVISED JUNE 2012 Clock Buffer/Clock Multiplier With Optional SSC Check for Samples: CDCS503-Q1 FEATURES 1 • • • • • • Qualified for Automotive Applications AEC-Q100 Test Guidance With the Following Results: – Device Temperature Grade 2 – -40°C to 105°C Ambient Operating Temperature Range – Device HBM ESD Classification Level H2 – Device CDM ESD Classification Level C3B Part of a Family of Easy to Use Clock Generator Devices With Optional Spread Spectrum Clocking (SSC) Clock Multiplier With Selectable Output Frequency and Selectable SSC SSC Controllable Through Two External Pins – ±0%, ±0.5%, ±1%, ±2% Center Spread Frequency Multiplication Selectable Between x1 or x4 With One External Control Pin VDD IN SSC_SEL 0 SSC_SEL 1 FS LVCMOS • • • • Output Disable Through Control Pin Single 3.3 V Device Power Supply Wide Temperature Range –40°C to 105°C Low Space Consumption 8-Pin TSSOP Package APPLICATIONS • Automotive Applications Requiring EMI Reduction Through SSC and/or Clock Multiplication IN SSC_SEL 0 SSC_SEL 1 GND 1 2 3 4 CDCS503-Q1 8 7 6 5 VDD OE OUT FS GND x1 or x4 / SSC LV CMOS OUT Control Logic OE Figure 1. BLOCK DIAGRAM 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2012, Texas Instruments Incorporated CDCS503-Q1 SCAS924B – MARCH 2012 – REVISED JUNE 2012 www.ti.com DESCRIPTION The CDCS503-Q1 device is a spread spectrum capable, LVCMOS input clock buffer with selectable frequency multiplication. It shares major functionality with the CDCS502 but uses a LVCMOS input stage instead of the crystal input stage of the CDCS502, and the CDCS503-Q1 has an output enable pin. The device accepts a 3.3-V LVCMOS signal at the input. The input signal is processed by a phased-locked loop (PLL), whose output frequency is either equal to the input frequency or multiplied by the factor of four. The PLL is also able to spread the clock signal by ±0%, ±0.5%, ±1% or ±2% centered around the output clock frequency with a triangular modulation. By this, the device can generate output frequencies between 8 MHz and 108 MHz with or without SSC. A separate control pin can be used to enable or disable the output. The CDCS503-Q1 device operates in a 3.3-V environment. It is characterized for operation from –40°C to 105°C, and available in an 8-pin TSSOP package. Table 1. FUNCTION TABLE 2 OE FS SSC_SEL 0 SSC_SEL 1 SSC AMOUNT fOUT/fIN 0 x x x x x fOUT at fin = 27 MHz 3-state 1 0 0 0 ±0.00% 1 27 MHz 1 0 0 1 ±0.50% 1 27 MHz 1 0 1 0 ±1.00% 1 27 MHz 1 0 1 1 ±2.00% 1 27 MHz 1 1 0 0 ±0.00% 4 108 MHz 1 1 0 1 ±0.50% 4 108 MHz 1 1 1 0 ±1.00% 4 108 MHz 1 1 1 1 ±2.00% 4 108 MHz Copyright © 2012, Texas Instruments Incorporated CDCS503-Q1 www.ti.com SCAS924B – MARCH 2012 – REVISED JUNE 2012 This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. DEVICE INFORMATION PACKAGE IN SSC_SEL 0 SSC_SEL 1 GND 1 2 3 4 CDCS503-Q1 8 7 6 5 VDD OE OUT FS PIN FUNCTIONS SIGNAL PIN TYPE DESCRIPTION IN 1 I LVCMOS clock input OUT 6 O LVCMOS clock output SSC_SEL 0, 1 2, 3 I Spread selection pins, internal pullup OE 7 I Output enable, internal pullup FS 5 I Frequency multiplication selection, internal pullup VDD 8 Power 3.3-V power supply GND 4 Ground Ground ORDERING INFORMATION TA PACKAGE –40°C to 105°C TSSOP ORDERABLE PART NUMBER TOP-SIDE MARKING CDCS503TPWRQ1 CS503Q 2000 PACKAGE THERMAL RESISTANCE FOR TSSOP (PW) PACKAGE over operating free-air temperature range (unless otherwise noted) (1) THERMAL AIRFLOW (CFM) PW 8-PIN TSSOP RθJA RθJC (1) 0 150 250 500 High K 149 142 138 132 Low K 230 185 170 150 High K 65 Low K 69 UNIT °C/W °C/W The package thermal impedance is calculated in accordance with JESD 51 and JEDEC2S2P (high-k board). THERMAL INFORMATION THERMAL METRIC (1) CDCS503TPWRQ1 PW (8 PINS) θJA Junction-to-ambient thermal resistance θJCtop Junction-to-case (top) thermal resistance 64.9 θJB Junction-to-board thermal resistance 108.7 ψJT Junction-to-top characterization parameter ψJB Junction-to-board characterization parameter 107 θJCbot Junction-to-case (bottom) thermal resistance n/a (1) UNIT 179.9 9 °C/W For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953. Submit Documentation Feedback Copyright © 2012, Texas Instruments Incorporated Product Folder Link(s): CDCS503-Q1 3 CDCS503-Q1 SCAS924B – MARCH 2012 – REVISED JUNE 2012 www.ti.com ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) VALUE UNIT VDD Supply voltage range –0.5 to 4.6 V VIN Input voltage range –0.5 to 4.6 V Vout Output voltage range –0.5 to 4.6 V IIN Input current (VI < 0, VI > VDD) 20 mA Iout Continuous output current 50 mA TST Storage temperature range –65 to 150 °C TJ Maximum junction temperature 125 °C ESD Rating Human-body model (HBM) AEC-Q100 classification level H2 1.5 kV Charged-device model (CDM) AEC-Q100 classification level C3B 750 V (1) 4 Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. Submit Documentation Feedback Copyright © 2012, Texas Instruments Incorporated Product Folder Link(s): CDCS503-Q1 CDCS503-Q1 www.ti.com SCAS924B – MARCH 2012 – REVISED JUNE 2012 RECOMMENDED OPERATING CONDITIONS MIN VDD Supply voltage fIN Input frequency VIL Low-level input voltage LVCMOS VIH High-level input voltage LVCMOS VI Input voltage threshold LVCMOS CL Output load test LVCMOS IOH/IOL Output current TA Operating free-air temperature NOM MAX 3 3.6 FS = 0 8 32 FS = 1 8 27 UNIT V MHz 0.3 VDD V 0.7 VDD V 0.5 VDD –40 V 15 pF ±12 mA 105 °C MAX UNIT DEVICE CHARACTERISTICS over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS fout = 70 MHz; FS = 1, SSC = 2% 22 Device supply current fOUT Output frequency IIH LVCMOS input current VI = VDD; VDD = 3.6 V IIL LVCMOS input current VI = 0 V; VDD = 3.6 V LVCMOS high-level output voltage VOL LVCMOS low-level output voltage mA FS = 0 8 32 FS = 1 32 108 IOH = - 0.1 mA 2.9 IOH = - 8 mA 2.4 IOH = - 12 mA 2.2 μA –10 μA V 0.1 IOL = 8 mA 0.5 IOL = 12 mA 0.8 High-impedance-state output current OE = Low tJIT(C-C) Cycle to cycle jitter (1) fout = 108 MHz; FS = 1, SSC = 1%, 10000 Cycles tr/tf Rise and fall time (1) 20%–80% Odc Output duty cycle (2) fMOD Modulation frequency MHz 10 IOL = 0.1 mA IOZ (1) (2) TYP 19 IDD VOH MIN fout = 20 MHz; FS = 0, no SSC –2 2 110 μA ps 0.75 45% V ns 55% 30 kHz Measured with Test Load, see Figure 3. Not production tested. Submit Documentation Feedback Copyright © 2012, Texas Instruments Incorporated Product Folder Link(s): CDCS503-Q1 5 CDCS503-Q1 SCAS924B – MARCH 2012 – REVISED JUNE 2012 www.ti.com 40 35 IDD - Input Current - mA 30 x4 Mode 25 20 x1 Mode 15 10 5 0 0 5 10 15 20 25 fi - Input Frequency - MHz 30 35 Figure 2. IDD vs Input Frequency, VCC = 3.3 V, SSC = 2%, Output Loaded With Test Load APPLICATION INFORMATION SSC MODULATION The exact implementation of the SSC modulation plays a vital role for the EMI reduction. The CDCS503-Q1 device uses a triangular modulation scheme implemented in a way that the modulation frequency depends on the VCO frequency of the internal PLL and the spread amount is independent from the VCO frequency. The modulation frequency can be calculated by using one of the below formulas chosen by frequency multiplication mode. FS = 0: fmod = fIN / 708 FS = 1: fmod = fIN / 620 PARAMETER MEASUREMENT INFORMATION VDD CDCS503-Q1 1 kW LVCMOS 1 kW 10 pF Figure 3. Test Load 6 Submit Documentation Feedback Copyright © 2012, Texas Instruments Incorporated Product Folder Link(s): CDCS503-Q1 CDCS503-Q1 www.ti.com SCAS924B – MARCH 2012 – REVISED JUNE 2012 PARAMETER MEASUREMENT INFORMATION (continued) CDCS503-Q1 LVCMOS LVCMOS Typical Driver Series Termination ~ 18 W Impedance ~ 32 W ZL = 50 W Figure 4. Load for 50-Ω Board Environment Submit Documentation Feedback Copyright © 2012, Texas Instruments Incorporated Product Folder Link(s): CDCS503-Q1 7 CDCS503-Q1 SCAS924B – MARCH 2012 – REVISED JUNE 2012 www.ti.com REVISION HISTORY Changes from Revision A (June 2012) to Revision B • 8 Page Changed AEC Q100 Qualified to AEC Q100 Test Guidance in FAD. .................................................................................. 1 Submit Documentation Feedback Copyright © 2012, Texas Instruments Incorporated Product Folder Link(s): CDCS503-Q1 PACKAGE OPTION ADDENDUM www.ti.com 29-Jun-2012 PACKAGING INFORMATION Orderable Device CDCS503TPWRQ1 Status (1) Package Type Package Drawing ACTIVE TSSOP PW Pins Package Qty 8 2000 Eco Plan (2) Green (RoHS & no Sb/Br) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) CU NIPDAU Level-3-260C-168 HR (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF CDCS503-Q1 : • Catalog: CDCS503 NOTE: Qualified Version Definitions: • Catalog - TI's standard catalog product Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device CDCS503TPWRQ1 Package Package Pins Type Drawing TSSOP PW 8 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 2000 330.0 12.4 Pack Materials-Page 1 7.0 B0 (mm) K0 (mm) P1 (mm) 3.6 1.6 8.0 W Pin1 (mm) Quadrant 12.0 Q1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) CDCS503TPWRQ1 TSSOP PW 8 2000 367.0 367.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2012, Texas Instruments Incorporated