CONEC 15K1A256

F
E
D
C
b
B
d
C
47,7 +- 0,3
0
4,85 `0,3
6,35 `0,3
D
10,23 +- 0,4
0,3
(5:1)
10,75 +- 0,4
0,3
3,6 +- 0,25
0
d
0,12
6 +- 0,18
13,07 +- 0,4
0,3
13,5 +- 0,4
0,3
1. FOR WAVESOLDERING (SOLDER BATH TEMERATURE 265°C FOR 8 SEC.
AND SOLDER PREHEAT 150°C FOR 180 SEC.)
2. IP RATING: IP 67
3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI
FOR 30 MINUTES
AFTER HIGH TEMPERATURE EXPOSURE
D
4. METALSHELL:
ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER
5. INSULATORS: PBT GF UL 94 V-0, BLACK
6. O-RING: SILICONE PER ASTM D2000 70 SHORE A
7. RUBBER GASKET: TPE
8. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK
9. CONTACTS: COPPER ALLOY
PLATING (SEE PART NO):
o PLEASE ADD 1 for 30µin HARD GOLD
over min. 50µin NICKEL
o PLEASE ADD 3 for 8µin HARD GOLD
over min. 50µin NICKEL
10. METAL BRACKETS: ZINC DIE CAST;
300µin COPPER/40-120µin NICKEL/120-200µin TIN
11. WASHERS: COPPER ALLOY; 80µin NICKEL
12. HEXLOCKING SCREWS: STAINLESS STEEL
13. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL
PCB-HOLE: n3.1`0.1; PCB THICKNESS 1.6mm
14. P.C.B. HOLE DRILLINGS and
RECOMMENDED PANEL CUT-OUT ON SHEET 2
15. RECOMMENDED TORQUE FOR MOUNTING SCREW
35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB)
16. CONNECTOR IS PART MARKED: 15-00074o CONEC ABC
n0,6 `0,05 (15x)
NOTES:
8,23 +- 0,25
0
C
RUBBER GASKET
PLACED ON TOP SURFACE
OF MALE INSULATOR
d
33,32 +- 0,13
0,12
POS. 1
A
25,14 +- 0,23
0,02
21,1 +- 00,3
POS. 9
10°
METAL BRACKET
B
3,2 `0,2
PRESS FOR FIXING ON PCB
B
SEALING
COMPOUND
O-RING
15-00074o
CONEC ABC
PCB SNAP
4,6
4-40 UNC
b
9,4
SEE NOTE 16
d
TITLE:
COMPANY NAME:
APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL
F
E
DO NOT ALTER CAD DRAWING BY HAND
NAME:
THIS DRAWING MAY NOT BE COPIED OR
REPRODUCED IN ANY WAY, AND MAY NOT
BE PASSED ON TO A THIRD PARTY WITHOUT
WRITTEN PERMISSION.
OWNERSHIP AND COPYRIGHT OF CONEC GmbH
APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL
CUSTOMER APPROVAL DATE:
APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION
APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION
4-40 UNC
A
SW 4,8
AT ALL TIMES WATER RESISTANT CONNECTORS NOT
IN USE SHOULD BE COVERED WITH A CONEC WATER
RESISTANT CAP OR WATER TIGHT HOOD.
tolerance
dim. in mm
Ä 3435
02.10.09
HS
3xb
Ä 3129
26.09.08
Petker
a
Origin
rev. description
D
see notes
A
title:
name
drawn
12.09.08
Schmidt
D-SUB MALE 90°
appd.
15.09.08
Fischer
15pos. SOLDER PIN ANGLED
with metal bracket, hexlocking screw and snap
dwg no:
Inventor 10
DIN-
d-old
part no:
name
C
A3
sh: 1
15K1A256
R
date
2:1 (5:1)
date
norm
4xd
scale:
material:
B
15-00074 o
(see note 9) b
A
F
E
D
C
B
A
P.C.B. HOLE DRILLINGS
33,32 +- 0,13
0,12
9,6 `0,1
D
D
6,86 `0,1
4,11 `0,1
2,74 `0,1
c
P.C.B. EDGE
d
2,84 `0,1
+ 0,1
n1 - 0 (15x)
6,85
10,75
1,37 `0,1
1
6,33 `0,1
n3,1 `0,1 (2x)
c
d
C
C
FRONTPANEL
5,49 `0,1
8,23 `0,1
RECOMMENDED PANEL CUT-OUT
b
28,8 `0,1
i 0,26 A
B
B
,4 `
R3
n3,1 `0,05 (2x)
11,4 `0,1
B
10° `1°
i 0,26 B
0,1
3
TITLE:
COMPANY NAME:
APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL
F
E
DO NOT ALTER CAD DRAWING BY HAND
NAME:
THIS DRAWING MAY NOT BE COPIED OR
REPRODUCED IN ANY WAY, AND MAY NOT
BE PASSED ON TO A THIRD PARTY WITHOUT
WRITTEN PERMISSION.
OWNERSHIP AND COPYRIGHT OF CONEC GmbH
APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL
CUSTOMER APPROVAL DATE:
APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION
A
APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION
33,32 `0,1
A
tolerance
dim. in mm
2xd
Ä 3435
02.10.09
15.04.09
HS
Ä 3129
26.09.08
Petker
a
Origin
rev. description
D
drawn
12.09.08
Schmidt
P.C.B. HOLE DRILLINGS
appd.
15.09.08
Fischer
PANEL CUT-OUT
D-SUB Male 15pos. Solder pin angled 90°
dwg no:
Inventor 10
DIN-
d-old
Ä 3344
A
title:
name
norm
2xc
part no:
name
C
A3
sh: 2
15K1A256
R
date
5:1
see sheet 1
date
HS
1xb
scale:
material:
B
see sheet 1
A