DESCRIPTION BY APPD DATE B REVISED PER ER11418 DAO REV DAO 01/07/09 NOTES: UNLESS OTHERWISE SPECIFIED 1. FOR GENERAL SERIES SPECIFICATIONS, SEE 74-0000. 2. MATERIAL SPECIFICATIONS: BRASS PER ASTM B16. 3. FINISH SPECIFICATIONS: .000030 MIN. GOLD PER ASTM B488 OVER .000050 MIN. NICKEL PER AMS QQ-N-290. 4. ELECTRICAL SPECIFICATIONS: CURRENT RATING: 30 AMPS MAX 5. SUGGESTED FOR USE WITH 12 GA WIRE OR EQUIVALENT. 6. REFER TO CAP10-01 FOR CABLE ASSEMBLY PROCEDURE. .395 10.03 .218 5.54 .250 6.35 .105±.003 2.67±.08 .275 6.99 .144 3.66 .069 1.75 .250 6.35 CATALOG P/N: 01381 .095 2.41 MAX RECOMMENDED CABLE TRIM DIMENSIONS SCALE: 2:1 PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 6:1 THIRD ANGLE 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER SALES DRAWING DRAWN LMD APPROVED WPM DMF029 B Winchester Electronics Corporation DATE APPROVED 02/15/06 BL DATE APPROVED 09/18/08 XXX DATE 09/19/08 DATE XX/XX/XX POWER SNAP STRAIGHT MALE CABLE MOUNT A SD01381 SHT OF 1 1 REV B