FAIRCHILD HCPL

Single-Channel: 6N138, 6N139
Dual-Channel: HCPL-2730, HCPL-2731
Low Input Current High Gain Split
Darlington Optocouplers
tm
Features
Description
■
■
■
■
■
■
Low current - 0.5 mA
Superior CTR-2000%
Superior CMR-10 kV/µs
CTR guaranteed 0-70°C
U.L. recognized (File # E90700)
VDE recognized (File # 120915) Ordering option
V, e.g., 6N138V
■ Dual Channel - HCPL-2730
■ HCPL-2731
The 6N138/9 and HCPL-2730/HCPL-2731 optocouplers consist
of an AlGaAs LED optically coupled to a high gain split darlington photodetector.
Applications
The combination of a very low input current of 0.5 mA and a
high current transfer ratio of 2000% makes this family particularly useful for input interface to MOS, CMOS, LSTTL and EIA
RS232C, while output compatibility is ensured to CMOS as well
as high fan-out TTL requirements. An internal noise shield provides exceptional common mode rejection of 10 kV/µs.
■
■
■
■
■
■
The split darlington configuration separating the input photodiode and the first stage gain from the output transistor permits
lower output saturation voltage and higher speed operation than
possible with conventional darlington phototransistor optocoupler. In the dual channel devices, HCPL-2730/HCPL2731, an
integrated emitter - base resistor provides superior stability over
temperature.
Digital logic ground isolation
Telephone ring detector
EIA-RS-232C line receiver
High common mode noise line receiver
µP bus isolation
Current loop receiver
Package
Schematic
8 VCC
N/C 1
+ 1
V
8
+ 2
8 VCC
F1
7 VB
_ 2
6 VO
_
7 V01
VF
1
_
3
3
6 V02
VF2
5 GND
N/C 4
8
8
1
6N138 / 6N139
+ 4
5 GND
HCPL-2730 / HCPL-2731
1
1
©2005 Fairchild Semiconductor Corporation
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Rev. 1.0.2
www.fairchildsemi.com
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Low Input Current High Gain Split Darlington Optocouplers
July 2006
Parameter
Symbol
Value
Units
Storage Temperature
TSTG
-55 to +125
°C
Operating Temperature
TOPR
-40 to +85
°C
Lead Solder Temperature (Wave solder only. See recommended reflow profile graph for
SMD mounting)
TSOL
260 for 10 sec
°C
IF (avg)
20
mA
IF (pk)
40
mA
IF (trans)
1.0
A
EMITTER
DC/Average Forward Input Current
Each Channel
Peak Forward Input Current (50% duty cycle, 1 ms P.W.)
Each Channel
Peak Transient Input Current - (≤1 µs P.W., 300 pps)
Reverse Input Voltage
Each Channel
VR
5
V
Input Power Dissipation
Each Channel
PD
35
mW
Each Channel
IO (avg)
60
mA
DETECTOR
Average Output Current
Emitter-Base Reverse Voltage
(6N138 and 6N139)
Supply Voltage, Output Voltage
(6N138, HCPL-2730)
VER
0.5
V
VCC, VO
-0.5 to 7
V
(6N139, HCPL-2731)
Output Power Dissipation
-0.5 to 18
Each Channel
PO
100
mW
Electrical Characteristics (TA = 0 to 70°C Unless otherwise specified)
Individual Component Characteristics
Parameter
Test Conditions Symbol
Device
Min Typ** Max
Unit
TA =25°C
VF
All
1.30
V
BVR
All
(∆VF/∆TA)
IOH
EMITTER
Input Forward Voltage
Input Reverse Breakdown Voltage
Each channel (IF = 1.6 mA)
(TA = 25°C, IR = 10 µA)
1.7
1.75
5.0
20
V
All
-1.8
mV/°C
6N139
0.01
100
0.01
250
6N138
6N139
0.4
1.5
HCPL-2731
1.3
3
6N135
6N136
0.05
10
(IF1 = IF2 = 0 mA, VCC = 18 V)
HCPL-2731
0.10
20
(VO1 - VO2 = Open, VCC = 7 V
HCPL-2730
Each Channel
Temperature coefficient of forward voltage (IF = 1.6 mA)
DETECTOR
Logic high output current
(IF = 0 mA, VO = VCC = 18 V)
Each Channel
HCPL-2731
(IF = 0 mA, VO = VCC = 7 V)
6N138
Each Channel
Logic low supply
(IF = 1.6 mA, VO = Open)
(VCC = 18 V)
HCPL-2730
ICCL
(IF1 = IF2 = 1.6 mA, VCC = 18 V)
(VO1 - VO2 = Open, VCC = 7 V
Logic high supply
(IF = 0 mA, VO = Open,
VCC = 18 V)
µA
mA
HCPL-2730
ICCH
µA
** All Typicals at TA = 25°C
2
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Rev. 1.0.2
www.fairchildsemi.com
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Low Input Current High Gain Split Darlington Optocouplers
Absolute Maximum Ratings (TA = 25°C unless otherwise specified)
Parameter
COUPLED
Current transfer ratio
(Note 1, 2)
Test Conditions Symbol
(IF = 0.5 mA, VO = 0.4 V, VCC = 4.5 V)
CTR
Each Channel
(IF = 1.6 mA, VO = 0.4 V, VCC = 4.5 V)
6N139
400
6N139
6N138
Each Channel
HCPL-2730
VOL
(IF = 1.6 mA, IO = 8 mA, VCC = 4.5 V)
Each Channel
(IF = 0.5 mA, IO = 15 mA, VCC = 4.5 V)
Each Channel
(IF = 12 mA, IO = 24 mA, VCC = 4.5 V)
Each Channel
(IF = 1.6 mA, IO = 4.8 mA, VCC = 4.5 V)
Each Channel
Typ**
Max
1100
Unit
%
3500
500
HCPL-2731
(IF = 1.6 mA, VO = 0.4 V, VCC = 4.5 V)
(IF = 0.5 mA, IO = 2 mA, VCC = 4.5 V)
Min
HCPL-2731
Each Channel
Logic low output voltage
output voltage (Note 2)
Device
1300
%
2500
300
1300
%
2500
6N139
0.08
0.4
6N139
0.01
0.4
0.13
0.4
0.20
0.4
0.10
0.4
V
HCPL-2731
6N139
HCPL-2731
6N139
HCPL-2731
6N138
HCPL-2730
** All Typicals at TA = 25°C
3
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Rev. 1.0.2
www.fairchildsemi.com
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Low Input Current High Gain Split Darlington Optocouplers
Transfer Characteristics (TA = 0 to 70°C Unless otherwise specified)
Parameter
Test Conditions Symbol
(RL = 4.7 kΩ, IF = 0.5 mA)
Propagation delay
time to logic low
(Note 2) (Fig. 22)
TPHL
Device
Min
6N139
30
TA = 25°C
4
(RL = 4.7 kΩ, IF = 0.5 mA)
Each Channel
HCPL-2731
3
6N139
(RL = 2.2 kΩ, IF = 1.6 mA)
TPLH
Each Channel
Each Channel
(RL = 270 Ω, IF = 12 mA)
20
6N139
90
6N139
12
HCPL-2731
22
µs
(RL = 2.2 kΩ, IF = 1.6 mA)
1.3
7
5
10
15
6N138
Each Channel
60
10
HCPL-2730
HCPL-2731
TA = 25°C
50
HCPL-2730/1
(RL = 2.2 kΩ, IF = 1.6 mA) TA = 25°C
Each Channel
(IF = 1.6 mA, |VCM| = 10 VP-P, RL = 2.2 kΩ)
TA = 25°C, (Note 3) (Fig. 23)
1
6N139
(RL = 270 Ω, IF = 12 mA) Each Channel
Common mode
transient immunity
at logic low
10
25
TA = 25°C
(IF = 0 mA, |VCM| = 10 VP-P)
TA = 25°C, (RL = 2.2 kΩ) (Note 3) (Fig. 23)
1.5
HCPL-2731
(RL = 4.7 kΩ, IF = 0.5 mA) TA = 25°C
Common mode
transient immunity
at logic high
2
15
HCPL-2731
HCPL-2730
TA = 25°C
(RL = 4.7 kΩ, IF = 0.5 mA)
0.3
6N138
TA = 25°C
Propagation delay
time to logic high
(Note 2) (Fig. 22)
1
3
HCPL-2731
(RL = 2.2 kΩ, IF = 1.6 mA)
Each Channel
0.2
HCPL-2730
TA = 25°C
100
2
TA = 25°C
(RL = 270 Ω, IF = 12 mA)
µs
25
120
TA = 25°C
(RL = 270 Ω, IF = 12 mA)
Each Channel
Typ** Max Unit
|CMH|
Each Channel
6N138
7
HCPL-2730/1
16
6N138
6N139
35
1,000
10,000
V/µs
1,000
10,000
V/µs
HCPL-2730
HCPL-2731
|CML|
Each Channel
6N138
6N139
HCPL-2730
HCPL-2731
** All Typicals at TA = 25°C
4
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Rev. 1.0.2
www.fairchildsemi.com
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Low Input Current High Gain Split Darlington Optocouplers
Switching Characteristics (TA = 0 to 70°C unless otherwise specified., VCC = 5 V)
Characteristics
Input-output
insulation leakage current
Withstand insulation test voltage
Resistance (input to output)
Capacitance (input to output)
Input-Input
Insulation leakage current
Input-Input Resistance
Input-Input Capacitance
Test Conditions Symbol
(Relative humidity = 45%)
(TA = 25°C, t = 5 s)
(VI-O = 3000 VDC)
(Note 8)
Min
Typ**
II-O
Max
Unit
1.0
µA
(RH ≤ 50%, TA = 25°C, II-O ≤ 2 µA)
(Note 4) ( t = 1 min.)
VISO
(Note 4) (VI-O = 500 VDC)
RI-O
1012
Ω
(Note 4, 5) (f = 1 MHz)
CI-O
0.6
pF
(RH ≤ 45%, VI-I = 500 VDC) (Note 6)
t = 5 s, (HCPL-2730/2731 only)
II-I
0.005
µA
(VI-I = 500 VDC) (Note 6)
(HCPL-2730/2731 only)
RI-I
1011
Ω
(f = 1 MHz) (Note 6)
(HCPL-2730/2731 only)
CI-I
0.03
pF
2500
VRMS
** All Typicals at TA = 25°C
Notes
1. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%.
2. Pin 7 open. (6N138 and 6N139 only)
3. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO>2.0 V). Common mode transient
immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal,
VCM, to assure that the output will remain in a logic low state (i.e., VO<0.8 V).
4. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together.
5. For dual channel devices, CI-O is measured by shorting pins 1 and 2 or pins 3 and 4 together and pins 5 through 8 shorted
together.
6. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together.
I
5
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Rev. 1.0.2
www.fairchildsemi.com
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Low Input Current High Gain Split Darlington Optocouplers
Isolation Characteristics (TA = 0 to 70°C Unless otherwise specified)
Current Limiting Resistor Calculations
R1 (Non-Invert) = VDD1 - VDF - VOL1
OUTPUT
IF
R1 (Invert) = VDD1 - VOH1 - VDF
INPUT
R1 (V)
IF
R2 = VDD2 - = VOLX (@ IL - I2)
CMOS
@5V
IL
NON-INV. 2000
INV.
CMOS
@ 5V
CMOS
@ 10 V
74XX
74LXX
74SXX
74LSXX
74HXX
R2 (V)
R2 (V)
R2 (V)
R2 (V)
R2 (V)
R2 (V)
R2 (V)
1000
2200
750
1000
1000
1000
560
510
CMOS NON-INV. 5100
@ 10 V
INV.
4700
Where:
74XX
VDD1 - Input Supply Voltage
NON-INV. 2200
INV.
VDD2 - Output Supply Voltage
74LXX
VDF - Diode Forward Voltage
NON-INV. 1800
INV.
74SXX
VOL1 - Logic “0” Voltage of Driver
360
74LSXX NON-INV. 2000
IF - Diode Forward Current
INV.
VOLX - Saturation Voltage of
Output Transistor
180
74HXX NON-INV. 2000
INV.
IL - Load Current Through
Resistor R2
180
Fig. 1 Resistor Values for Logic Interface
I2 - Input Current of Output Gate
VDD2
VDD1
IN
100
NON-INV. 2000
INV.
VOH1 - Logic “1” Voltage of Driver
180
1
8
2
7
3
6
VDD2
R2
R1
IN
OUT
4
1
8
2
7
3
6
4
5
R2
OUT
R1
5
Fig. 2 Non-Inverting Logic Interface
6
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Rev. 1.0.2
Fig. 3 Inverting Logic Interface
www.fairchildsemi.com
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Low Input Current High Gain Split Darlington Optocouplers
Electrical Characteristics (TA = 25°C unless otherwise specified)
Fig. 5 LED Forward Voltage vs. Temperature
1.5
IF = 1.6 mA
FORWARD VOLTAGE - VF (V)
FORWARD CURRENT - IF (mA)
10
TA = 85˚C
1
TA = 70˚C
0.1
1.4
1.3
1.2
0.01
TA = 25˚C
TA = -40˚C
TA = 0˚C
0.001
1.0
1.1
1.1
1.2
1.3
1.4
1.5
1.6
-40
-20
0
20
40
60
80
100
FORWARD VOLTAGE - VF (V)
TEMPERATURE - TA (˚C)
Fig. 6 Non-saturated Rise and Fall Times vs.
Load Resistance (6N138 / 6N139 Only)
Fig. 7 Non-saturated Rise and Fall Times vs.
Load Resistance (HCPL-2730 / HCPL-2731 Only)
100
TA = 25˚C
TA = 25˚C
tf
tf
TIME - µs
TIME, T (µs)
10
10
tr
tr
1
IF ADJUSTED FOR VOL = 2 V
1
0.1
1
10
0.1
1
RL - LOAD RESISTANCE (kΩ)
RL - LOAD RESISTANCE (kΩ)
Fig. 8 Propagation Delay To Logic Low
vs. Base-Emitter Resistance
(HCPL-2730 / HCPL-2731 Only)
Fig. 9 Current Transfer Ratio vs. Forward Current
(6N138 / 6N139 Only)
6
IF = 1.6 mA, VCC = 5 V
RL = 2.2 K, TA = 25°C
Normalized to RBE = None
5
1600
CURRENT TRANSFER RATIO - CTR (%)
TPHL - PROPAGATION DELAY TO LOGIC LOW - (µs)
10
4
3
2
1
0
0.01
0.1
1
VCC = 5 V
VO= 0.4 V
1200
TA = 85˚C
800
TA = 70˚C
TA = 25˚C
400
10
RBE - BASE-EMITTER RESISTANCE - MΩ
7
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Rev. 1.0.2
TA = 0˚C
TA = -40˚C
0
0.01
0.1
1
10
IF - FORWARD CURRENT - mA
www.fairchildsemi.com
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Low Input Current High Gain Split Darlington Optocouplers
Fig. 4 LED Forward Current vs. Forward Voltage
100
Fig. 11 Current Transfer Ratio vs. Forward Current
(HCPL-2730 / HCPL-2731 Only)
5000
VCC = 5 V
VO = 0.4 V
1400
CTR - CURRENT TRANSFER RATIO - %
CTR - CURRENT TRANSFER RATIO (%)
1600
1200
1000
800
600
400
IF = 1.6 mA
VCC = 5 V
VO = 0.4 V
200
4000
TA = 85˚C
TA = 25˚C
3000
TA = 0˚C
2000
10
100
TA = -40˚C
1000
0
1
TA = 70˚C
0
1000
0.1
1
RBE - BASE RESISTANCE (kΩ)
100
IF - FORWARD CURRENT - mA
Fig. 12 Output Current vs Output Voltage
(6N138 / 6N139 Only)
Fig. 13 Output Current vs Output Voltage
(HCPL-2730 / HCPL-2731 Only)
120
60
5 mA
VCC = 5V
TA = 25˚C
4.5 mA
4 mA
TA = 25˚C
VCC = 5.0 V
3.5 mA
IF = 5.0 mA
IF = 4.5 mA
100
50
IF = 4.0 mA
IO-OUTPUT CURRENT - mA
3 mA
IO - OUTPUT CURRENT (mA)
10
2.5 mA
40
2 mA
30
1.5 mA
20
IF = 3.5 mA
80
IF = 3.0 mA
IF = 2.5 mA
IF = 2.0 mA
60
IF = 1.5 mA
IF = 1.0 mA
40
1 mA
20
10
IF = 0.5 mA
0
0
1
2
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
VO - OUTPUT VOLTAGE (V)
VO - OUTPUT VOLTAGE (V)
Fig. 14 Output Current vs. Input Diode Forward Current
(6N138 / 6N139 Only)
Fig. 15 Output Current vs
Input Diode Forward Current
(HCPL-2730 / HCPL-2731 Only)
100
2.0
VCC = 5.0 V
VO = 0.4 V
TA = 85˚C
VCC = 5 V
VO = 0.4 V
IO - OUTPUT CURRENT - mA
IO - OUTPUT CURRENT (mA)
10
100
1.8
1
TA = 85˚C
TA = 70˚C
0
10
TA = 25˚C
1
TA = -40˚C
TA = 25˚C
TA = 0˚C
TA = -40˚C
0
0.01
0.1
0.1
1
10
IF - INPUT DIODE FORWARD CURRENT - mA
8
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Rev. 1.0.2
0.1
1
10
100
IF - INPUT DIODE FORWARD CURRENT - mA
www.fairchildsemi.com
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Low Input Current High Gain Split Darlington Optocouplers
Fig. 10 Current Transfer Ratio vs. Base-Emitter Resistance
(6N138 / 6N139 Only)
Fig. 17 Logic Low Supply Current vs.
Input Diode Forward Current
(HCPL-2730 / HCPL-2731 Only)
100
4.0
ICCL - LOGIC LOW SUPPLY CURRENT - mA
ICCL - LOGIC LOW SUPPLY CURRENT (mA)
TA = 25˚C
3.5
3.0
2.5
VCC = 5 V
2.0
VCC = 18 V
1.5
1.0
0.5
HCPL-2731
VCC = 18 V
10
HCPL-2730
HCPL-2731
VCC = 7 V
1
0.1
0.0
0
2
4
6
8
10
12
14
16
0.1
1
IF - FORWARD CURRENT (mA)
Fig. 18 Propagation Delay vs. Input Diode Forward Current
(6N138 / 6N139 Only)
100
Fig. 19 Propagation Delay vs. Input Diode Forward Current
(HCPL-2730 / HCPL-2731 Only)
70
70
VCC = 5 V
TA = 25˚C
VCC = 5 V
TA = 25˚C
60
60
tP - PROPAGATION DELAY - µs
tP - PROPAGATION DELAY - µs
10
IF - INPUT DIODE FORWARD CURRENT - mA
50
(tPHL) RL = 2.2 kΩ or 4.7 kΩ
40
30
20
(tPLH) RL = 4.7 kΩ
10
50
(tPHL) RL = 2.2 kΩ or 4.7 kΩ
40
30
(tPLH) RL = 4.7 kΩ
20
(tPLH) RL = 2.2 kΩ
10
(tPLH) RL = 2.2 kΩ
0
0
0
1
2
3
4
5
6
7
8
9
0
10
IF - INPUT DIODE FORWARD CURRENT - mA
4
6
8
10
Fig. 21 Propagation Delay to Logic Low vs. Pulse Period
Fig. 20 Propagation Delay to Logic Low vs. Pulse Period
(6N138 / 6N139 Only)
(HCPL-2730 / HCPL-2731 Only)
100
100
tPHL - PROPAGATION DELAY to LOGIC LOW - µs
tPHL - PROPAGATION DELAY to LOGIC LOW - µs
2
IF - INPUT DIODE FORWARD CURRENT - mA
6N139
IF = 0.5 mA
RL = 4.7 kΩ
10
6N138
IF = 1.6 mA
RL = 2.2 kΩ
1
10
HCPL-2731
IF = 0.5 mA
RL = 4.7 kΩ
1
HCPL-2730
HCPL-2731
IF =1.6 mA
RL = 2.2kΩ
TA = 25˚C
TA = 25˚C
0.1
0.01
0.1
1
10
0.1
0.01
T - INPUT PULSE PERIOD - ms
9
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Rev. 1.0.2
0.1
1
10
T - INPUT PULSE PERIOD - ms
www.fairchildsemi.com
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Low Input Current High Gain Split Darlington Optocouplers
Fig. 16 Logic Low Supply Current vs.
Input Diode Forward Current
(6N138 / 6N139 Only)
Fig. 23 Propagation Delay vs. Temperature
(HCPL-2730 / HCPL-2731 Only)
50
50
HCPL-2730 : IF = 1.6 mA, RL = 2.2 k
HCPL-2731 : IF = 0.5 mA, RL = 4.7 k
40
40
tP - PROPAGATION DELAY - µs
tP - PROPAGATION DELAY - µs
HCPL-2730 : IF = 1.6 mA, RL = 2.2 k
HCPL-2731 : IF = 0.5 mA, RL = 4.7 k
tPLH (HCPL-2731)
30
20
tPLH (HCPL-2730)
tPHL (HCPL-2731)
10
tPHL (HCPL-2730)
0
tPLH (HCPL-2731)
30
20
tPLH (HCPL-2730)
tPHL (HCPL-2731)
10
tPHL (HCPL-2730)
0
0
10
20
30
40
50
60
70
80
0
TA - TEMPERATURE (˚C)
10
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Rev. 1.0.2
10
20
30
40
50
60
70
80
TA - TEMPERATURE (˚C)
www.fairchildsemi.com
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Low Input Current High Gain Split Darlington Optocouplers
Fig. 22 Propagation Delay vs. Temperature
(6N138 / 6N139 Only)
Noise
Shield
8
2
7
3
6
4
5
VCC
VB
Pulse
Generator
tr = 5ns
Z O = 50 V
+5 V
VO
Rm
-
IF
MONITOR
2
7
3
6
4
5
VCC
+5 V
RL
V01
0.1 µF
VO
C L = 15 pF*
V02
VF2
+
Rm
C L = 15 pF*
GND
8
VF1
VO
0.1 µF
I F Monitor
1
10% DUTY CYCLE
I/f < 100 µS
RL
VF
Noise
Shield
+
IF
GND
Test Circuit for HCPL-2730 and HCPL-2731
Test Circuit for 6N138, 6N139
IF
5V
VO
1.5 V
1.5 V
VOL
TPHL
TPLH
Fig. 22 Switching Time Test Circuit
IF
1
Noise
Shield
8
2
A
B
7
VCC
+
+5 V
IF
VB
Noise
Shield
1
8
VCC
VF1
-
RL
+5 V
RL
2
7
V01
A
VF
3
6
4
5
B
VO
VO
0.1 µF
VFF
+
GND
-
VFF
3
6
4
5
VF2
+
-
V02
VO
0.1 µF
GND
VCM
-
+
Pulse Gen
VCM
-
Pulse Gen
Test Circuit for 6N138 and 6N139
Test Circuit for HCPL-2730 and HCPL-2731
VCM 10 V
0V
90%
90%
10%
tr
VO
10%
tf
5V
Switch at A : I F = 0 mA
VO
VOL
Switch at B : I F = 1.6 mA
Fig. 23 Common Mode Immunity Test Circuit
11
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Rev. 1.0.2
www.fairchildsemi.com
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Low Input Current High Gain Split Darlington Optocouplers
Pulse
Generator
IF
tr = 5ns
Z O = 50 V
10% D.C.
I/ f< 100 ms
1
Package Dimensions (Surface Mount)
0.390 (9.91)
0.370 (9.40)
PIN 1
ID.
4
3
2
4
3
2
1
0.270 (6.86)
0.250 (6.35)
5
6
PIN 1
ID.
1
7
0.270 (6.86)
0.250 (6.35)
8
5
6
7
8
SEATING PLANE
0.390 (9.91)
0.370 (9.40)
0.070 (1.78)
0.045 (1.14)
0.070 (1.78)
0.045 (1.14)
0.020 (0.51)
MIN
0.020 (0.51) MIN
0.200 (5.08)
0.140 (3.55)
0.154 (3.90)
0.120 (3.05)
0.022 (0.56)
0.016 (0.41)
0.016 (0.40)
0.008 (0.20)
0.100 (2.54) TYP
0.315 (8.00)
MIN
0.100 (2.54)
TYP
0.300 (7.62)
TYP
Package Dimensions (0.4"Lead Spacing)
3
2
0.016 (0.41)
0.008 (0.20)
0.045 [1.14]
0.022 (0.56)
0.016 (0.41)
15° MAX
0.405 (10.30)
MIN
Lead Coplanarity : 0.004 (0.10) MAX
4
0.300 (7.62)
TYP
Recommended Pad Layout for
Surface Mount Leadform
PIN 1
ID.
1
0.070 (1.78)
0.270 (6.86)
0.250 (6.35)
0.060 (1.52)
5
6
7
8
SEATING PLANE
0.390 (9.91)
0.370 (9.40)
0.100 (2.54)
0.295 (7.49)
0.070 (1.78)
0.045 (1.14)
0.415 (10.54)
0.004 (0.10) MIN
0.200 (5.08)
0.140 (3.55)
0.030 (0.76)
0.154 (3.90)
0.120 (3.05)
0.022 (0.56)
0.016 (0.41)
0.016 (0.40)
0.008 (0.20)
0.100 (2.54) TYP
0° to 15°
0.400 (10.16)
TYP
NOTE
All dimensions are in inches (millimeters)
12
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Rev. 1.0.2
www.fairchildsemi.com
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Low Input Current High Gain Split Darlington Optocouplers
Package Dimensions (Through Hole)
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Low Input Current High Gain Split Darlington Optocouplers
Ordering Information
Option
Example Part Number
Description
S
6N138S
SD
6N138SD
Surface Mount; Tape and reel
Surface Mount Lead Bend
W
6N138W
0.4" Lead Spacing
V
6N138V
VDE0884
WV
6N138WV
VDE0884; 0.4” lead spacing
SV
6N138SV
VDE0884; surface mount
SDV
6N138SDV
VDE0884; surface mount; tape and reel
Marking Information
1
V
3
2730
2
XX YY T1
6
4
5
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4
Two digit year code, e.g., ‘03’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
13
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Rev. 1.0.2
www.fairchildsemi.com
12.0 ± 0.1
4.90 ± 0.20
4.0 ± 0.1
Ø1.55 ± 0.05
4.0 ± 0.1
0.30 ± 0.05
1.75 ± 0.10
7.5 ± 0.1
13.2 ± 0.2
10.30 ± 0.20
Ø1.6 ± 0.1
10.30 ± 0.20
0.1 MAX
16.0 ± 0.3
User Direction of Feed
Reflow Profile
Temperature (°C)
300
215 C, 10–30 s
250
225 C peak
200
150
Time above 183C, 60–150 sec
100
50
Ramp up = 3C/sec
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
Time (Minute)
• Peak reflow temperature: 225C (package surface temperature)
• Time of temperature higher than 183C for 60–150 seconds
• One time soldering reflow is recommended
14
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Rev. 1.0.2
www.fairchildsemi.com
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Low Input Current High Gain Split Darlington Optocouplers
Tape Specifications
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.
ACEx™
ActiveArray™
Bottomless™
Build it Now™
CoolFET™
CROSSVOLT™
DOME™
EcoSPARK™
E2CMOS™
EnSigna™
FACT™
FAST®
FASTr™
FPS™
FRFET™
FACT Quiet Series™
GlobalOptoisolator™
GTO™
HiSeC™
I2C™
i-Lo™
ImpliedDisconnect™
IntelliMAX™
ISOPLANAR™
LittleFET™
MICROCOUPLER™
MicroFET™
MicroPak™
MICROWIRE™
MSX™
MSXPro™
Across the board. Around the world.™
The Power Franchise®
Programmable Active Droop™
OCX™
OCXPro™
OPTOLOGIC®
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerEdge™
PowerSaver™
PowerTrench®
QFET®
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
µSerDes™
ScalarPump™
SILENT SWITCHER®
SMART START™
SPM™
Stealth™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TCM™
TinyBoost™
TinyBuck™
TinyPWM™
TinyPower™
TinyLogic®
TINYOPTO™
TruTranslation™
UHC™
UniFET™
UltraFET®
VCX™
Wire™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS
HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE
APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER
ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S
WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which,
(a) are intended for surgical implant into the body, or (b) support or
sustain life, or (c) whose failure to perform when properly used in
accordance with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. I20
15
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Rev. 1.0.2
www.fairchildsemi.com
Single-Channel: 6N138, 6N139 Dual-Channel: HCPL-2730, HCPL-2731 Low Input Current High Gain Split Darlington Optocouplers
TRADEMARKS