HSP-150 150W Single Output with PFC Function series Features : Universal AC input / Full range Withstand 300VAC surge input for 5 seconds Built-in active PFC function High efficiency up to 90% Low leakage current<0.5mA Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection for 150W and 200W with 30CFM forced air Low profile:32mm Conformal coated ZVS technology to reduce power dissipation Built-in remote sense LED indicator for power on 3 years warranty SPECIFICATION HSP-150-2.5 HSP-150-3.8 HSP-150-5 DC VOLTAGE 2.5V 3.8V 5V RATED CURRENT 30A 30A 30A CURRENT RANGE(convection) 0 ~ 30A 0 ~ 30A 0 ~ 30A MODEL OUTPUT PEAK CURRENT RANGE(30CFM FAN) 0 ~ 40A RATED POWER(convection) 75W PEAK POWER(30CFM FAN) 100W RIPPLE & NOISE (max.) Note.2 80mVp-p 0 ~ 40A 0 ~ 40A 114W 152W 100mVp-p 150W 200W 100mVp-p VOLTAGE ADJ. RANGE 3.4~4.2V 4.5~5.5V VOLTAGE TOLERANCE Note.3 2.0% 2.0% 2.0% LINE REGULATION 0.5% 0.5% 0.5% 1.0% 3000ms, 100ms/115VAC at full load 1.0% 2.35~2.75V LOAD REGULATION 1.0% 2000ms, 100ms/230VAC SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE 16ms/230VAC Note.4 90 ~ 264VAC FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT 47 ~ 63Hz PF 0.95/230VAC 16ms/115VAC at full load 127 ~ 370VDC PF 0.98/115VAC at full load 90% 88% 86% 0.8A/115VAC 0.4A/230VAC Cold start 70A/230VAC 1.2A/115VAC 0.6A/230VAC 1.5A/115VAC 0.8A/230VAC <0.5mA / 240VAC 140~180% rated output power OVERLOAD PROTECTION SHORT CIRCUIT OVER VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed 4.7 ~ 5.7V 3.2 ~ 3.7V 5.7 ~ 7.0V Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE 110 5 (TSW1) 115 Protection type : Hiccup mode, recovers automatically after fault condition is removed WORKING TEMP. -30 ~ +70 5 (TSW1) (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 60 TEMP. COEFFICIENT 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes VIBRATION SAFETY & EMC (Note 5) SAFETY STANDARDS WITHSTAND VOLTAGE UL60950-1,EN60950-1 approved ISOLATION RESISTANCE EMC EMISSION I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25 / 70%RH Compliance to EN55022 (CISPR22) Class B,EN61000-3-2,EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11;EN55024, light industry level (surge 4KV), criteria A EMC IMMUNITY MTBF OTHERS NOTE DIMENSION PACKING I/P-O/P:3.0KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC 263.2K hrs min. MIL-HDBK-217F (25 220*62*32mm (L*W*H) ) 0.61kg; 24pcs/15.6kg/1.63CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the static characteristics for more details. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:HSP-150-SPEC 2012-03-07 HSP-150 150W Single Output with PFC Function Mechanical Specification CASE NO.:208A 220 series Unit:mm 32 SVR1 1 2 50mm 30CFM 3.3 216 2 AC Input Terminal(TB1) pin NO. Assignment Pin No. 1 2 3 Assignment AC/L AC/N FG 7.75 FAN 3 2 1 LED 47 62 Air flow direction Vo 1 ADJ 2 CN1 TB1 Remote sense pin(CN1):JS-1001-02 or equivalent Pin No. 1 2 Terminal T21-BM10-03 Assignment -S +S Mating Housing Terminal JS-2001-02 or equivalent JS-1001-02 or equivalent DC Output Terminal pin NO. Assignment Pin No. 1 2 Assignment -V +V Terminal CPB-7 M5 Block Diagram +S EMI FILTER I/P BRIDGE RECTIFIERS APFC CONTROLLER POWER SWITCHING SYNCHRONOUS RECTIFIERS & FILTER +V -V -S O.T.P. FG O.L.P. DETECTION CIRCUIT PWM CONVERTER O.V.P. Derating Curve Static Characteristics fosc=90Khz 40 40 35 2.5 With fan 25 V Without fan 20 14 -30 3.8 With fan 2.5V&3.8V 32 30 Io(A) Io(A) 30 V& 24 20 Without fan 5V 5V 10 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 (HORIZONTAL) 90 100 110 135 155 230 264 INPUT VOLTAGE (V) 60Hz File Name:HSP-150-SPEC 2012-03-07