DRAM MODULE KMM5322204C2W/C2WG 2Mx32 DRAM SIMM (1MX16 Base) Revision 0.0 November 1997 -1- Rev. 0.0 (Nov. 1997) DRAM MODULE KMM5322204C2W/C2WG Revision History Version 0.0 (November 1997) • Changed module PCB from 6-Layer to 4-Layer. • Changed Module Part No. from KMM5322204CW/CWG to KMM5322204C2W/C2WG caused by PCB revision . -2- Rev. 0.0 (Nov. 1997) DRAM MODULE KMM5322204C2W/C2WG KMM5322204C2W/C2WG Fast Page Mode with Extended Data Out 2M x 32 DRAM SIMM using 1Mx16 , 1K Refresh, 5V GENERAL DESCRIPTION FEATURES The Samsung KMM5322204C2W is a 2Mx32bits Dynamic RAM Samsung high density memory module. The • Part Identification - KMM5322204C2W(1024 cycles/16ms Ref, SOJ, Solder) KMM5322204C2W consists of four CMOS 1Mx16bits DRAMs - KMM5322204C2WG(1024 cycles/16ms Ref, SOJ, Gold) in 42-pin SOJ package mounted on a 72-pin glass-epoxy sub- • Fast Page Mode with Extended Data Out strate. A 0.1 or 0.22uF decoupling capacitor is mounted on the • CAS-before-RAS refresh capability printed circuit board for each DRAM. The KMM5322204C2W is • RAS-only and Hidden refresh capability a Single In-line Memory Module with edge connections and is • TTL compatible inputs and outputs intended for mounting into 72 pin edge connector sockets. • Single +5V±10% power supply PERFORMANCE RANGE • JEDEC standard PDPin & pinout Speed tRAC tCAC tRC tHPC -5 50ns 15ns 90ns 25ns -6 60ns 15ns 110ns 30ns • PCB : Height(750mil), double sided component PIN CONFIGURATIONS PIN NAMES Pin Symbol Pin Symbol 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 VSS DQ0 DQ16 DQ1 DQ17 DQ2 DQ18 DQ3 DQ19 Vcc NC A0 A1 A2 A3 A4 A5 A6 NC DQ4 DQ20 DQ5 DQ21 DQ6 DQ22 DQ7 DQ23 A7 NC Vcc A8 A9 RAS1 RAS0 NC NC 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 NC NC Vss CAS0 CAS2 CAS3 CAS1 RAS0 RAS1 NC W NC DQ8 DQ24 DQ9 DQ25 DQ10 DQ26 DQ11 DQ27 DQ12 DQ28 Vcc DQ29 DQ13 DQ30 DQ14 DQ31 DQ15 NC PD1 PD2 PD3 PD4 NC Vss Pin Name Function A0 - A9 Address Inputs DQ0 - DQ31 Data In/Out W Read/Write Enable RAS0 , RAS1 Row Address Strobe CAS0 - CAS3 Column Address Strobe PD1 -PD4 Presence Detect Vcc Power(+5V) Vss Ground NC No Connection Res Reserved Pin PRESENCE DETECT PINS (Optional) Pin 50NS 60NS PD1 PD2 PD3 PD4 NC NC Vss Vss NC NC NC NC * Pin connection changing available SAMSUNG ELECTRONICS CO., LTD. reserves the right to change products and specifications without notice. -3- Rev. 0.0 (Nov. 1997) DRAM MODULE KMM5322204C2W/C2WG FUNCTIONAL BLOCK DIAGRAM DQ0-DQ15 RAS0 RAS CAS0 LCAS U0 CAS1 UCAS OE A0-A9 W DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 U2 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 A0-A9 RAS RAS1 LCAS CAS0 UCAS CAS1 OE W DQ16-DQ31 RAS CAS2 LCAS U1 CAS3 UCAS OE A0-A9 W DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 U3 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 A0-A9 RAS LCAS CAS2 UCAS CAS3 OE W A0-A9 W Vcc .1 or .22uF Capacitor for each DRAM To all DRAMs Vss -4- Rev. 0.0 (Nov. 1997) DRAM MODULE KMM5322204C2W/C2WG ABSOLUTE MAXIMUM RATINGS * Item Voltage on any pin relative to V SS Voltage on V CC supply relative to V SS Storage Temperature Power Dissipation Short Circuit Output Current Symbol Rating Unit VIN , VOUT VCC Tstg Pd IOS -1 to +7.0 -1 to +7.0 -55 to +150 4 50 V V °C W mA * Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. Functional operation should be restricted to the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for in tended periods may affect device reliability. RECOMMENDED OPERATING CONDITIONS (Voltage referenced to VSS, TA = 0 to 70°C) Item Symbol Min Typ Max Unit VCC VSS VIH VIL 4.5 0 2.4 5.0 0 - 5.5 0 V V V V Supply Voltage Ground Input High Voltage Input Low Voltage -1.0*2 VCC +1*1 0.8 *1 : VCC +2.0V/20ns, Pulse width is measured at VCC . *2 : -2.0V/20ns, Pulse width is measured at VSS . DC AND OPERATING CHARACTERISTICS (Recommended operating conditions unless otherwise noted) ICC1 ICC2 ICC3 ICC4 ICC5 ICC6 II(L) IO(L) VOH VOL Symbol Speed ICC1 KMM5322204C2W/C2WG Unit Min Max -5 -6 - 304 284 mA mA ICC2 Don′t care - 8 mA ICC3 -5 -6 - 304 284 mA mA ICC4 -5 -6 - 244 224 mA mA ICC5 Don′t care - 4 mA ICC6 -5 -6 - 304 284 mA mA II(L) IO(L) Don′t care -20 -10 20 10 uA uA VOH VOL Don′t care 2.4 - 0.4 V V : Operating Current * ( RAS, CAS, Address cycling @ tRC =min) : Standby Current ( RAS=CAS=W=VIH ) : RAS Only Refresh Current * ( CAS=VIH, RAS cycling @ tRC =min) : EDO Mode Current * ( RAS=VIL, CAS cycling : tHPC =min) : Standby Current ( RAS=CAS=W=Vcc-0.2V) : CAS-Before-RAS Refresh Current * ( RAS and CAS cycling @ tRC =min) : Input Leakage Current (Any input 0 ≤VIN≤Vcc+0.5V, all other pins not under test=0 V) : Output Leakage Current(Data Out is disabled, 0V ≤VOUT ≤Vcc) : Output High Voltage Level (I OH = -5mA) : Output Low Voltage Level (I OL = 4.2mA) * NOTE : ICC1 , ICC3 , ICC4 and ICC6 are dependent on output loading and cycle rates. Specified values are obtained with the output open. ICC is specified as an average current. In I CC1 and ICC3 , address can be changed maximum once while RAS=VIL. In I CC4 , address can be changed maximum once within one EDO mode cycle, tHPC . -5- Rev. 0.0 (Nov. 1997) DRAM MODULE KMM5322204C2W/C2WG CAPACITANCE (TA = 25°C, VCC=5V, f = 1MHz) Item Input capacitance[A0-A9] Input capacitance[ W] Input capacitance[ RAS0 , RAS1] Input capacitance[ CAS0 - CAS3] Input/Output capacitance[DQ0-31] Symbol Min Max Unit CIN1 CIN2 CIN3 CIN4 CDQ1 - 44 48 40 29 29 pF pF pF pF pF AC CHARACTERISTICS (0°C≤TA≤70°C, VCC=5.0V±10%. See notes 1,2.) Test condition : Vih/Vil=2.4/0.8V, V oh/Vol=2.0/0.8V, Output loading CL=100pF Parameter Random read or write cycle time Access time from RAS Access time from CAS Access time from column address CAS to output in Low-Z Output buffer turn-off delay from CAS Transition time(rise and fall) RAS precharge time RAS pulse width RAS hold time CAS hold time CAS pulse width RAS to CAS delay time RAS to column address delay time CAS to RAS precharge time Row address set-up time Row address hold time Column address set-up time Column address hold time Column address to RAS lead time Read command set-up time Read command hold time referenced to CAS Read command hold time referenced to RAS Write command hold time Write command pulse width Write command to RAS lead time Write command to CAS lead time Data-in set-up time Data-in hold time Refresh period Write command set-up time CAS setup time(CAS-before-RAS refresh) CAS hold time(CAS-before-RAS refresh) RAS precharge to CAS hold time Access time from CAS precharge Symbol tRC tRAC tCAC tAA tCLZ tCEZ tT tRP tRAS tRSH tCSH tCAS tRCD tRAD tCRP tASR tRAH tASC tCAH tRAL tRCS tRCH tRRH tWCH tWP tRWL tCWL tDS tDH tREF tWCS tCSR tCHR tRPC tCPA -5 Min -6 Max 90 Min Max 110 Unit Note ns 50 60 ns 3,4,10 15 17 ns 3,4,5 25 30 ns 3,10 ns 3 3 3 3 13 3 15 ns 6,11,12 2 50 2 50 ns 2 30 50 40 10K 13 60 ns 10K 17 40 ns ns 50 ns 8 10K 10 10K ns 13 20 37 20 45 ns 4 15 25 15 30 ns 10 5 5 ns 0 0 ns 10 10 ns 0 0 ns 8 10 ns 25 30 ns 0 0 ns 0 0 ns 8 0 0 ns 8 10 10 ns 10 10 ns 13 15 ns 13 10 ns 0 0 ns 9 8 10 ns 9 16 16 ms 0 0 ns 5 5 ns 10 10 ns 5 5 30 -6- 7 ns 35 ns 3 Rev. 0.0 (Nov. 1997) DRAM MODULE KMM5322204C2W/C2WG AC CHARACTERISTICS (0°C≤TA≤70°C, VCC=5.0V±10%. See notes 1,2.) Test condition : Vih/Vil=2.4/0.8V, V oh /Vol=2.0/0.8V, Output loading CL=100pF Parameter Hyper page mode cycle time CAS precharge time(Hyper page cycle) RAS pulse width(Hyper page cycle) RAS hold time from CAS precharge W to RAS precharge time(C-B-R refresh) W to RAS hold time(C-B-R refresh) Output data hold time Output buffer turn off delay from RAS Output buffer turn off delay from W W to data delay W pulse width (Hyper Page Cycle) Symbol -5 Min -6 Max 25 tHPC tCP tRASP tRHCP tWRP tWRH tDOH tREZ tWEZ tWED tWPE Min Max 30 8 10 50 200K 60 Unit Note ns 13 ns 200K ns 30 35 ns 10 10 ns 10 10 ns 5 5 ns 3 13 3 15 ns 6,11,12 3 13 3 15 ns 6,11 15 15 ns 5 5 ns NOTES 1. An initial pause of 200us is required after power-up followed by any 8 RAS-only or CAS-before-RAS refresh cycles before proper device operation is achieved. 2. VIH(min) and V IL(max) are reference levels for measuring timing of input signals. Transition times are measured between V IH(min) and V IL(max) and are assumed to be 5ns for all inputs. 3. Measured with a load equivalent to 2 TTL loads and 100pF. 4. Operation within the tRCD (max) limit insures that tRAC (max) can be met. tRCD (max) is specified as a reference point only. If tRCD is greater than the specified tRCD (max) limit, then access time is controlled exclusively by tCAC . 5. Assumes that tRCD ≥tRCD (max). 6. This parameter defines the time at which the output achieves the open circuit condition and is not referenced to V OH or VOL . 8. Either tRCH or tRRH must be satisfied for a read cycle. 9. These parameter are referenced to the CAS leading edge in early write cycles and to the W leading edge in read-write cycles. 10. Operation within the tRAD (max) limit insures that tRAC (max) can be met. tRAD (max) is specified as reference point only. If tRAD is greater than the specified tRAD (max) limit, then access time is controlled by tAA . 11. tCEZ (max), tREZ (max), tWEZ (max) and tOEZ (max) define the time at which the output achieves the open circuit condition and are not referenced to output voltage level. 12. If RAS goes to high before CAS high going, the open circuit condtion of the output is achieved by CAS high going. If CAS goes to high before RAS high going, the open circuit condition of the output is achieved by RAS high going. 13. tASC ≥tCP min 7. tWCS is non-restrictive operating parameter. It is included in the data sheet as electrical characteristic s only. If tWCS ≥tWCS (min), the cycle is an early write cycle and the data out pin will remain high impedance for the duration of the cycle. -7- Rev. 0.0 (Nov. 1997) DRAM MODULE KMM5322204C2W/C2WG READ CYCLE tRC tRAS RAS VIL - tCSH tCRP CAS tRP VIH - tRCD tCRP tRSH VIH - tCAS VIL - tRAD tASR A VIH VIL - tRAH tRAL tASC tCAH ROW ADDRESS COLUMN ADDRESS tRCH tRCS W tRRH VIH VIL - tWEZ tAA tCEZ DQ VOH VOL - tRAC tCAC tCLZ OPEN tREZ DATA-OUT Don′t care Undefined -8- Rev. 0.0 (Nov. 1997) DRAM MODULE KMM5322204C2W/C2WG WRITE CYCLE ( EARLY WRITE ) NOTE : DOUT = OPEN tRC tRAS RAS tRP VIH VIL - tCSH tCRP CAS tRSH VIH - VIH VIL - tCRP tCAS VIL - tRAD tASR A tRCD tRAH tASC ROW ADDRESS tRAL tCAH COLUMN ADDRESS tCWL tRWL tWCS W VIH VIL - tDS DQ tWCH tWP VIH VIL - tDH DATA-IN Don′t care Undefined -9- Rev. 0.0 (Nov. 1997) DRAM MODULE KMM5322204C2W/C2WG HYPER PAGE READ CYCLE tRP tRASP RAS VIH VIL - ¡ó tCSH tCRP CAS VIL - tHPC tCP tCAS VIL - tHPC tCP tCAS tCP tCAS tCAS tRAD tASR A tRCD VIH - VIH - tRHCP tHPC tRAH tASC ROW ADDR tCAH tASC COLUMN ADDRESS tCAH COLUMN ADDRESS tASC tCAH COLUMN ADDR tASC tCAH tREZ COLUMN ADDRESS tRRH tRCS W tRCH VIH VIL - tCAC tAA tCPA tAA tCAC tDOH tRAC DQ VOH VOL - VALID DATA-OUT tCAC tAA tCPA tDOH VALID DATA-OUT tCPA tCAC tAA tDOH VALID DATA-OUT VALID DATA-OUT tCLZ Don′t care Undefined - 10 - Rev. 0.0 (Nov. 1997) DRAM MODULE KMM5322204C2W/C2WG HYPER PAGE WRITE CYCLE ( EARLY WRITE ) NOTE : DOUT = OPEN tRP tRASP RAS VIH - tRHCP VIL - ¡ó tHPC tCRP CAS tRCD tHPC VIH - tCAS VIL - tRSH tCP tCP tCAS tCAS tRAD ¡ó tCSH tASR A VIH VIL - tRAH tASC tCAH VIH - tCAH ROW ADDR. COLUMN ADDRESS COLUMN ADDRESS tWCH tWCS ¡ó tCAH tWP tWP COLUMN ADDRESS tWCS tWCH ¡ó tWCH tWP VIL - tCWL tDS DQ tASC ¡ó tWCS W tASC VIH VIL - tDH tCWL tDS tCWL tRWL tDH tDS tDH ¡ó VALID DATA-IN VALID DATA-IN ¡ó VALID DATA-IN Don′t care Undefined - 11 - Rev. 0.0 (Nov. 1997) DRAM MODULE KMM5322204C2W/C2WG RAS - ONLY REFRESH CYCLE* NOTE : W, OE, DIN = Don't care DOUT = OPEN tRC RAS VIH - tRP tRAS VIL - tRPC tCRP CAS VIH VIL - tASR A tCRP VIH VIL - tRAH ROW ADDR CAS - BEFORE - RAS REFRESH CYCLE NOTE : OE , A = Don't care tRC tRP RAS VIH VIL - tRPC tCP CAS tRAS VIH - tRPC tCSR tCHR VIL - tWRP W tRP tWRH VIH VIL - tCEZ DQ VOH - OPEN VOL - Don′t care Undefined * In RAS-only refresh cycle of 64Mb A-dile & B-die, when CAS signal transits from Low to High, the valid data may be cut off. - 12 - Rev. 0.0 (Nov. 1997) DRAM MODULE KMM5322204C2W/C2WG HIDDEN REFRESH CYCLE ( READ ) tRC RAS tRAS VIH - tRP tRAS VIL - tCRP CAS tRC tRP tRCD tRSH tCHR VIH VIL - tRAD tASR A VIH VIL - tRAH tASC ROW ADDRESS tCAH COLUMN ADDRESS tRCS W tRRH tWRH tWRP VIH VIL - tAA tCEZ tCAC tREZ tWEZ tCLZ tRAC DQ VOH VOL - DATA-OUT OPEN Don′t care Undefined - 13 - Rev. 0.0 (Nov. 1997) DRAM MODULE KMM5322204C2W/C2WG HIDDEN REFRESH CYCLE ( WRITE ) NOTE : DOUT = OPEN tRC RAS tRAS VIH - tRP tRAS VIL - tCRP CAS tRC tRP tRCD tRSH tCHR VIH VIL - tRAD tASR A VIH VIL - tRAH tASC ROW ADDRESS tCAH COLUMN ADDRESS tWRP tWCS W VIH VIL - VIH VIL - tWCH tWP tDS DQ tWRH tDH DATA-IN Don′t care Undefined - 14 - Rev. 0.0 (Nov. 1997) DRAM MODULE KMM5322204C2W/C2WG CAS-BEFORE-RAS REFRESH COUNTER TEST CYCLE tRP RAS CAS VIH - tRAS VIL VIH - tCPT tCSR tRSH tCAS tCHR VIL - tRAL tASC A VIH - W COLUMN ADDRESS VIL - READ CYCLE tCAH tWRP tWRH tRRH tAA tRCS tRCH tCAC VIH VIL - tWEZ DQ tCLZ VOH - DATA-OUT VOL - WRITE CYCLE W tCEZ tREZ VIH - tWRP tRWL tWRH tCWL tWCS VIL - tWCH tWP tDS DQ tDH VIH DATA-IN VIL - Don′t care Undefined NOTE : This timing diagram is applied to all devices besides 64M DRAM based modules. - 15 - Rev. 0.0 (Nov. 1997) DRAM MODULE KMM5322204C2W/C2WG CAS - BEFORE - RAS SELF REFRESH CYCLE NOTE : OE, A = Don′t care tRP RAS VIL - tRPS tRPC tRPC tCP CAS tRASS VIH - VIH - tCHS tCSR VIL - tCEZ DQ W VOH - OPEN VOL - VIH VIL - tWRP tWRH TEST MODE IN CYCLE NOTE : OE , A = Don′t care tRC tRP RAS tRP tRAS VIH VIL - tRPC tRPC tCP CAS tCSR VIH - tWTS W tCHR VIL - tWTH VIH VIL - tCEZ DQ VOH - OPEN VOL - Don′t care Undefined - 16 - Rev. 0.0 (Nov. 1997) DRAM MODULE KMM5322204C2W/C2WG PACKAGE DIMENSIONS Units : Inches (millimeters) 4.250(107.95) 3.984(101.19) .133(3.38) .125 DIA±.002(3.18±.051) R.062(1.57) .400(10.16) .750(19.05) .250(6.35) .080(2.03) R.062±.004(R1.57±.10) .250(6.35) .250(6.35) .125(3.17) MIN 3.750(95.25) ( Front view ) ( Back view ) Gold & Solder Plating Lead .350(8.89) MAX .100(2.54) .010(.25)MAX MIN .050(1.27) .041±.004(1.04±.10) .054(1.37) .047(1.19) .225(5.71) MIN Tolerances : ±.005(.13) unless otherwise specified NOTE : The used device is 1Mx16 DRAM DRAM Part No. : KMM5322204C2W/C2WG -- KM416C1204CJ (400 mil) Revision History Rev 0.0 : Nov. 1997 - 17 - Rev. 0.0 (Nov. 1997)