VISHAY 25TTS16SPBF

VS-25TTS...SPbF Series
www.vishay.com
Vishay Semiconductors
Thyristor, Surface Mount, Phase Control SCR, 16 A
FEATURES
Anode
2
• Meets MSL level 1, per
LF maximum peak of 260 °C
• Designed
and
JEDEC-JESD47
according
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
3
Cathode Gate
1
D2PAK
qualified
J-STD-020,
APPLICATIONS
• Input rectification (soft start)
• Vishay input diodes, switches and output rectifiers which
are available in identical package outlines
PRODUCT SUMMARY
Package
TO-263AB (D2PAK)
Diode variation
Single SCR
IT(AV)
16 A
VDRM/VRRM
800 V, 1200 V
VTM
1.25 V
IGT
45 mA
TJ
- 40 to 125 °C
DESCRIPTION
The VS-25TTS...SPbF High Voltage Series of silicon
controlled rectifiers are specifically designed for medium
power switching and phase control applications. The glass
passivation technology used has reliable operation up to
125 °C junction temperature.
OUTPUT CURRENT IN TYPICAL APPLICATIONS
APPLICATIONS
SINGLE-PHASE BRIDGE
THREE-PHASE BRIDGE
NEMA FR-4 or G10 glass fabric-based epoxy
with 4 oz. (140 μm) copper
3.5
5.5
Aluminum IMS, RthCA = 15 °C/W
8.5
13.5
Aluminum IMS with heatsink, RthCA = 5 °C/W
16.5
25.0
UNITS
A
Note
• TA = 55 °C, TJ = 125 °C, footprint 300 mm2
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER
IT(AV)
TEST CONDITIONS
Sinusoidal waveform
IRMS
16
25
VRRM/VDRM
ITSM
VT
VALUES
16 A, TJ = 25 °C
dV/dt
dI/dt
TJ
UNITS
A
800 to 1200
V
350
A
1.25
V
500
V/μs
150
A/μs
- 40 to 125
°C
VDRM, MAXIMUM PEAK
DIRECT VOLTAGE
V
IRRM/IDRM,
AT 125 °C
mA
VOLTAGE RATINGS
PART NUMBER
VRRM, MAXIMUM PEAK
REVERSE VOLTAGE
V
VS-25TTS08SPbF
800
800
VS-25TTS12SPbF
1200
1200
Revision: 05-Jul-13
10
Document Number: 94383
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-25TTS...SPbF Series
www.vishay.com
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Maximum average on-state current
IT(AV)
Maximum RMS on-state current
IRMS
Maximum peak, one-cycle, 
non-repetitive surge current
ITSM
TEST CONDITIONS
VALUES
TYP.
MAX.
TC = 93 °C, 180° conduction half sine wave
16
10 ms sine pulse, rated VRRM applied
300
10 ms sine pulse, no voltage reapplied
350
10 ms sine pulse, rated VRRM applied
450
10 ms sine pulse, no voltage reapplied
630
UNITS
25
A
Maximum I2t for fusing
I2t
Maximum I2t for fusing
I2t
t = 0.1 ms to 10 ms, no voltage reapplied
6300
A2s
Maximum on-state voltage drop
VTM
16 A, TJ = 25 °C
1.25
V
12.0
m
1.0
V
On-state slope resistance
Threshold voltage
Maximum reverse and direct leakage current
rt
VT(TO)
IRM/IDM
TJ = 125 °C
TJ = 25 °C
TJ = 125 °C
Holding current
IH
VS-25TTS08,
VS-25TTS12
Maximum latching current
IL
Anode supply = 6 V, resistive load, TJ = 25 °C
Maximum rate of rise of off-state voltage
dV/dt
Maximum rate of rise of turned-on current
dI/dt
0.5
VR = Rated VRRM/VDRM
Anode supply = 6 V,
resistive load, initial IT = 1 A,
TJ = 25 °C
TJ = TJ max., linear to 80 %, VDRM = Rg - k = Open
A2s
10
-
150
mA
200
500
V/μs
150
A/μs
TRIGGERING
PARAMETER
Maximum peak gate power
SYMBOL
TEST CONDITIONS
VALUES
UNITS
PGM
8.0
Maximum average gate power
PG(AV)
2.0
Maximum peak positive gate current
+ IGM
1.5
A
Maximum peak negative gate voltage
- VGM
10
V
Anode supply = 6 V, resistive load, TJ = - 10 °C
Maximum required DC gate current to trigger
Maximum required DC gate voltage to trigger
IGT
VGT
Maximum DC gate voltage not to trigger
VGD
Maximum DC gate current not to trigger
IGD
60
Anode supply = 6 V, resistive load, TJ = 25 °C
45
Anode supply = 6 V, resistive load, TJ = 125 °C
20
Anode supply = 6 V, resistive load, TJ = - 10 °C
2.5
Anode supply = 6 V, resistive load, TJ = 25 °C
2.0
Anode supply = 6 V, resistive load, TJ = 125 °C
1.0
TJ = 125 °C, VDRM = Rated value
W
mA
V
0.25
2.0
mA
VALUES
UNITS
SWITCHING
PARAMETER
SYMBOL
Typical turn-on time
tgt
Typical reverse recovery time
trr
Typical turn-off time
tq
Revision: 05-Jul-13
TEST CONDITIONS
TJ = 25 °C
TJ = 125 °C
0.9
4
μs
110
Document Number: 94383
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-25TTS...SPbF Series
www.vishay.com
Vishay Semiconductors
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum junction and storage
temperature range
TEST CONDITIONS
VALUES
TJ, TStg
Soldering temperature
TS
Maximum thermal resistance, 
junction to case
RthJC
UNITS
- 40 to 125
For 10 s (1.6 mm from case)
260
DC operation
1.1
°C
°C/W
Typical thermal resistance, 
junction to ambient (PCB mount)
RthJA (1)
40
Approximate weight
2
g
0.07
oz.
25TTS08S
Case style D2PAK (SMD-220)
Marking device
25TTS12S
130
Maximum Averag e On-state Power Loss (W)
Maximum Allowable Case Tempera ture (°C)
Note
(1) When mounted on 1" square (650 mm2) PCB of FR-4 or G-10 material 4 oz. (140 μm] copper 40 °C/W
For recommended footprint and soldering techniques refer to application note #AN-994
R thJC (DC) = 1.1 °C/ W
120
Conduc tion Angle
110
30°
60°
90°
100
120°
180°
90
0
5
10
15
25
180°
120°
90°
60°
30°
20
15
RMSLimit
10
Conduc tion Angle
5
TJ= 125°C
0
20
0
Maximum Averag e On-state Power Loss (W)
Maximum Allowable Case Temperature (°C)
R thJC (DC) = 1.1 °C/ W
120
Conduction Period
100
60°
90°
120°
30°
180°
DC
80
0
5
10
15
20
25
Average On-sta te Current (A)
Fig. 2 - Current Rating Characteristics
Revision: 05-Jul-13
12
16
20
Fig. 3 - On-State Power Loss Characteristics
130
90
8
Avera ge On-state Current (A)
Average On-sta te Current (A)
Fig. 1 - Current Rating Characteristics
110
4
30
35
DC
180°
120°
90°
60°
30°
30
25
20
RMS Limit
15
Conduction Period
10
5
T J = 125°C
0
0
5
10
15
20
25
30
Avera ge On-sta te Current (A)
Fig. 4 - On-State Power Loss Characteristics
Document Number: 94383
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-25TTS...SPbF Series
350
Vishay Semiconductors
400
At Any Rated Load Condition And With
Rated V RRM Applied Following Surge.
Initial TJ = 125°C
@60 Hz 0.0083 s
@50 Hz 0.0100 s
300
Peak Half Sine Wa ve On-state Current (A)
Pea k Half Sine Wave On-sta te Current (A)
www.vishay.com
250
200
150
1
10
100
350
300
Maximum Non Repetitive Surge Current
Versus Pulse Train Duration. Control
Of Cond uc tion Ma y Not Be Ma inta ined.
Initia l TJ = 125°C
No Voltage Rea pp lied
Rated VRRM Reapp lied
250
200
150
100
0.01
0.1
1
Pulse Train Duration (s)
Number Of Equal Amplitude Half Cyc le Current Pulses (N)
Fig. 5 - Maximum Non-Repetitive Surge Current
Fig. 6 - Maximum Non-Repetitive Surge Current
Instantaneous On-state Current (A)
1000
100
TJ= 25°C
TJ= 125°C
10
1
0
1
2
3
4
5
Instantaneous On-state Voltage (V)
Transient Thermal Imped anc e Z thJC (°C/W)
Fig. 7 - On-State Voltage Drop Characteristics
10
Steady State Value
(DC Opera tion)
1
0.1
D = 0.50
D = 0.33
D = 0.25
D = 0.17
D = 0.08
Single Pulse
0.01
0.0001
0.001
0.01
0.1
1
10
Square Wave Pulse Duration (s)
Fig. 8 - Gate Characteristics
Revision: 05-Jul-13
Document Number: 94383
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-25TTS...SPbF Series
www.vishay.com
Vishay Semiconductors
Rec tangular gate pulse
a)Rec ommended load line for
rated di/ dt: 10 V, 20 ohms
tr = 0.5 µs, tp >= 6 µs
b)Rec ommended load line for
<= 30% rated d i/ dt: 10 V, 65 ohms
10
tr = 1 µs, tp >= 6 µs
(1)
(2)
(3)
(4)
PGM = 40 W, tp = 1 ms
PGM = 20 W, tp = 2 ms
PGM = 8 W, tp = 5 ms
PGM = 4 W, tp = 10 ms
(a )
(b)
VGD
TJ = -10 °C
TJ = 125 °C
1
TJ = 25 °C
Instantaneous Gate Voltage (V)
100
(4)
IGD
(2)
(3)
(1)
Frequency Limited by PG(AV)
0.1
0.001
0.01
0.1
1
10
100
Instantaneous Gate Current (A)
Fig. 9 - Thermal Impedance ZthJC Characteristics
ORDERING INFORMATION TABLE
Device code
VS-
25
T
T
S
12
S
1
2
3
4
5
6
7
1
-
Vishay Semiconductors product
2
-
Current rating (25 = 25 A)
3
-
4
-
5
-
6
-
Circuit configuration:
T = Single thyristor
Package:
T = TO-220AC
Type of silicon:
S = Standard recovery rectifier
Voltage rating: Voltage code x 100 = VRRM
7
-
S = TO-220 D2PAK (SMD-220) version
8
-
9
-
None = Tube
TRL = Tape and reel (left oriented)
TRR = Tape and reel (right oriented)
PbF = Lead (Pb)-free
TRL PbF
8
9
08 = 800 V
12 = 1200 V
ORDERING INFORMATION (Example)
PREFERRED P/N
QUANTITY PER T/R
MINIMUM ORDER QUANTITY
PACKAGING DESCRIPTION
VS-25TTS08SPbF
50
1000
Antistatic plastic tubes
VS-25TTS08STRRPbF
800
800
13" diameter reel
VS-25TTS08STRLPbF
800
800
13" diameter reel
VS-25TTS12SPbF
50
1000
Antistatic plastic tubes
VS-25TTS12STRRPbF
800
800
13" diameter reel
VS-25TTS12STRLPbF
800
800
13" diameter reel
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?95046
Part marking information
www.vishay.com/doc?95054
Packaging information
www.vishay.com/doc?95032
Revision: 05-Jul-13
Document Number: 94383
5
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
Vishay Semiconductors
D2PAK
DIMENSIONS in millimeters and inches
Conforms to JEDEC outline D2PAK (SMD-220)
(2)(3)
E
B
Pad layout
A
A
(E)
c2
11.00
MIN.
(0.43)
A
(3) L1
4
9.65
MIN.
(0.38)
(D1) (3)
Detail A
D
H
1
2
17.90 (0.70)
15.00 (0.625)
(2)
3
3.81
MIN.
(0.15)
L2
B
B
2.32
MIN.
(0.08)
A
2 x b2
c
2.64 (0.103)
2.41 (0.096)
(3)
E1
C
View A - A
2xb
± 0.004 M B
0.010 M A M B
Plating
H
2x e
Base
Metal
(4)
b1, b3
Gauge
plane
Seating
plane
Lead assignments
Diodes
1. - Anode (two die)/open (one die)
2., 4. - Cathode
3. - Anode
SYMBOL
MILLIMETERS
MIN.
c1 (4)
(c)
B
0° to 8°
MAX.
L3
Lead tip
A1
L
(b, b2)
L4
Section B - B and C - C
Scale: None
Detail “A”
Rotated 90 °CW
Scale: 8:1
INCHES
MIN.
MAX.
NOTES
SYMBOL
MILLIMETERS
MIN.
MAX.
INCHES
MIN.
MAX.
NOTES
A
4.06
4.83
0.160
0.190
D1
6.86
8.00
0.270
0.315
3
A1
0.00
0.254
0.000
0.010
E
9.65
10.67
0.380
0.420
2, 3
E1
7.90
8.80
0.311
0.346
3
b
0.51
0.99
0.020
0.039
b1
0.51
0.89
0.020
0.035
b2
1.14
1.78
0.045
0.070
b3
1.14
1.73
0.045
0.068
c
0.38
0.74
0.015
0.029
c1
0.38
0.58
0.015
0.023
c2
1.14
1.65
0.045
0.065
D
8.51
9.65
0.335
0.380
4
4
4
e
0.100 BSC
H
14.61
15.88
0.575
0.625
L
1.78
2.79
0.070
0.110
L1
-
1.65
-
0.066
L2
1.27
1.78
0.050
0.070
L3
2
2.54 BSC
L4
0.25 BSC
4.78
5.28
3
0.010 BSC
0.188
0.208
Notes
(1) Dimensioning and tolerancing per ASME Y14.5 M-1994
(2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at
the outmost extremes of the plastic body
(3) Thermal pad contour optional within dimension E, L1, D1 and E1
(4) Dimension b1 and c1 apply to base metal only
(5) Datum A and B to be determined at datum plane H
(6) Controlling dimension: inch
(7) Outline conforms to JEDEC outline TO-263AB
Document Number: 95046
Revision: 31-Mar-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000