COILCRAFT ML611PYA153MSZ

1010 POWER INDUCTORS
Outgassing Compliant Power Inductors AE611PYA
■ High temperature materials allow operation in ambient
temperatures up to 155°C
■ Passes NASA low outgassing specifications
■ Tin-lead (Sn-Pb) termination for the best possible board
adhesion
■ High current and very low DCR
■ Soft saturation makes them ideal for VRM/VRD applications.
Core material Composite
Terminations Tin-lead (63/37) over copper.
Weight 5.7 – 6.3 g
Ambient temperature –55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperature Component: –55°C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging 300/13″ reel Plastic tape: 24 mm wide, 0.4 mm thick, 16 mm pocket spacing,
10.21 mm pocket depth
Part number1
AE611PYA221MSZ
AE611PYA451MSZ
AE611PYA681MSZ
AE611PYA102MSZ
AE611PYA152MSZ
AE611PYA222MSZ
AE611PYA332MSZ
AE611PYA472MSZ
AE611PYA562MSZ
AE611PYA682MSZ
ML611PYA822MSZ
ML611PYA103MSZ
ML611PYA153MSZ
Inductance2
±20% (µH)
0.22
0.45
0.68
1.0
1.5
2.2
3.3
4.7
5.6
6.8
8.2
10
15
DCR (mOhms)3
typ max
0.450.50
0.650.72
0.870.96
1.001.10
1.601.76
2.552.80
3.704.10
5.205.70
6.306.93
8.108.90
11.7012.90
13.4014.75
16.9018.60
SRF (MHz)4
min typ
92 115
53 66
42 53
34 42
26 33
18 22
17 21
15 19
13 16
11 14
9 12
8 11
7
9
1. When ordering, please specify testing code:
AE611PYA682MSZ
Testing:Z=COTS
H=Screening per Coilcraft CP-SA-10001
N
=Screening per Coilcraft CP-SA-10004
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 4395A or equivalent.
5. Typical dc current at which the inductance drops 30% from its value without current.
6. Typical current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Irms Testing
Irms testing was performed on a
0.060″ thick pcb with 4 oz. copper
traces optimized to minimize
additional temperature rise.
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should be
verified in application conditions.
Document AE804-1 Revised 02/20/13
®
© Coilcraft, Inc. 2013
Irms (A)6
Isat (A)5
20°C rise 40°C rise
98.8
30.8 41.6
70.5
30.0 39.8
62.0
28.5 37.5
55.0
24.0 32.6
36.6
23.3 30.4
34.0
18.4 24.0
27.4
13.7 18.8
25.4
13.1 18.0
23.6
11.8 15.9
21.8
10.5 13.9
18.3
9.7 12.8
17.5
8.6 11.6
15.5
7.4 10.4
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email [email protected]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.
1010 POWER INDUCTORS
AE611PYA Series (1010)
Inductance (µH)
0.4
0.3
0.22 µH
0.2
0.1
0
0
10
20
30
40
50
60
70
Current (A)
80
90 100
Inductance (µH)
0.6
0.5
0.4
0.45 µH
0.3
0.2
0.1
0
0
10
20
30
40
50
60
Current (A)
70
80
90
Inductance (µH)
1.2
1.0
0.8
0.6
0.68 µH
0.4
0.2
0
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
0
10
20
30
40
Current (A)
50
60
70
80
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
Typical L vs Current
1.0 µH
0
10
20
30
40
Current (A)
50
60
70
80
2.0
1.6
1.5 µH
1.2
0.8
0.4
0
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
0
10
20
40
50
60
40
50
60
2.2 µH
0
10
20
30
Current (A)
5
4
3
3.3 µH
2
1
0
0
5
10
15
20
25
30
35
40
45
50
30
35
40
45
50
Current (A)
6
5
4
4.7 µH
3
2
1
0
0
5
10
15
20
25
Current (A)
Document AE804-2 Revised 02/20/13
®
© Coilcraft, Inc. 2013
30
Current (A)
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email [email protected]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.
1010 POWER INDUCTORS
AE611PYA Series (1010)
Inductance (µH)
Inductance (µH)
10
8
6
5.6 µH
4
2
0
0
5
10
15
Current (A)
20
25
30
10
Inductance (µH)
Inductance (µH)
Inductance (µH)
Typical L vs Current
8
6.8 µH
6
4
2
0
0
5
10
15
Current (A)
20
25
30
16
12
8
10 µH
4
0
0
2
4
6
8
10
12
14
16
18
20
12
14
16
18
20
Current (A)
20
16
12
15 µH
8
4
0
0
2
4
6
8
10
Current (A)
12
10
8
8.2 µH
6
4
2
0
0
2
4
6
8
10
12
Current (A)
14
16
18
20
Document AE804-3 Revised 02/20/13
®
© Coilcraft, Inc. 2013
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email [email protected]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.
1010 POWER INDUCTORS
AE611PYA Series (1010)
Typical L vs Frequency
Inductance (µH)
100
15 µH
10 µH 6.8 µH
4.7 µH
10
2.2 µH
1.5 µH
1.0 µH
1
0.45 µH
0.22 µH
0.1
0.1
10
1
100
Frequency (MHz)
Irms Derating
120
110
90
80
70
60
Dimensions are in
50
40
inches
mm
25°C
Percent of rated Irms
100
30
20
10
0
-55 -40
-20
0
20
40
60
80
100
120
140 160
Ambient temperature (°C)
Document AE804-4 Revised 02/20/13
®
© Coilcraft, Inc. 2013
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email [email protected]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.