Phototransistors PNZ108CL (PN108CL) Silicon NPN Phototransistor Unit : mm 3.0±0.3 For optical control systems 12.7 min. 2.0±0.1 0.2±0.05 Features High sensitivity : ICE(L) = 3.5 mA (min.) (at L = 500 lx) Wide directional sensitivity for easy use 3-ø0.45±0.05 Fast response : tr = 5 µs (typ.) 2.54±0.25 1. Signal mixing capability using base pin 0. Symbol Ratings Unit Collector to emitter voltage VCEO 20 V Collector to base voltage VCBO 30 V Emitter to collector voltage VECO 3 V Emitter to base voltage VEBO 5 V Collector current IC 20 mA Collector power dissipation PC 100 mW Operating ambient temperature Topr –25 to +85 ˚C Storage temperature Tstg –30 to +100 ˚C 3˚ 45± ø5.75 max. ø4.2±0.2 1. 0± 15 Absolute Maximum Ratings (Ta = 25˚C) Parameter 0. 15 0± Small size (low in height) package 3 1 2 1: Emitter 2: Base 2: Collector Electro-Optical Characteristics (Ta = 25˚C) Parameter Symbol Dark current ICEO Collector photo current Peak sensitivity wavelength Acceptance half angle *2 VCE = 10V, L = 500 lx*1 min 3.5 typ max Unit 0.05 2 µA 6 mA λP VCE = 10V 900 nm θ Measured from the optical axis to the half power point 80 deg. 5 µs Rise time tr*2 VCC = 10V, ICE(L) = 5mA Fall time tf*2 RL = 100Ω Collector saturation voltage *1 ICE(L) *3 Conditions VCE = 10V VCE(sat) µs 6 ICE(L) = 1mA, L = 1000 lx*1 0.3 0.6 V Measurements were made using a tungsten lamp (color temperature T = 2856K) as a light source. Switching time measurement circuit Sig.IN VCC (Input pulse) Sig.OUT (Output pulse) RL ;;;; ;; 50Ω *3 I CE(L) 90% 10% td tr tf td : Delay time tr : Rise time (Time required for the collector photo current to increase from 10% to 90% of its final value) tf : Fall time (Time required for the collector photo current to decrease from 90% to 10% of its initial value) Classifications Class Q R S ICE(L) (mA) 3.5 to 6.0 5.0 to 9.1 > 7.5 Note) Difficult to guarantee compliance with moisture resistance standard (MIL-STD-202D). Note) The part number in the parenthesis shows conventional part number. 1 Phototransistors PNZ108CL ICE(L) — VCE 80 60 40 20 Ta = 25˚C T = 2856K 16 1000 lx 12 750 lx 8 500 lx 4 250 lx 20 40 60 80 0 100 Ta (˚C ) 0 4 8 10 1 10 –1 1 10 –1 20 40 60 Ambient temperature 80 S (%) 1 20 40 80 60 40 0 200 120 400 600 800 1000 tf — ICE(L) VCC = 10V Ta = 25˚C 10 4 50˚ 10 3 60˚ 70˚ 80˚ 90˚ 10 3 10 2 RL = 1kΩ 500Ω 10 10 2 RL = 1kΩ 500Ω 10 100Ω 100Ω 1 1 10 –1 10 –2 10 –1 1 Collector photo current 2 1200 Wavelength λ (nm) Ta (˚C ) VCC = 10V Ta = 25˚C 10 4 tr (µs) 40 80 tr — ICE(L) 30˚ Rise time 60 Relative sensitivity S (%) 80 0 Ambient temperature 40˚ 100 VCE = 10V Ta = 25˚C 20 Ta (˚C ) 20˚ 10 3 L (lx) Spectral sensitivity characteristics tf (µs) 10˚ 10 2 10 Illuminance 100 10 10 –1 – 40 100 1 VCE (V) VCE = 10V L = 500 lx T = 2856K Directivity characteristics 0˚ 10 –2 24 Relative sensitivity ICE(L) (mA) Collector photo current 10 0 20 ICE(L) — Ta 10 2 VCE = 10V 10 –2 – 20 16 Collector to emitter voltage ICEO — Ta 10 2 12 Fall time 0 Ambient temperature ICEO (µA) VCE = 10V Ta = 25˚C T = 2856K L = 1500 lx 100 lx 0 – 20 Dark current ICE(L) — L 10 2 Collector photo current ICE(L) (mA) 100 Collector photo current PC (mW) Collector power dissipation 20 ICE(L) (mA) PC — Ta 120 10 10 2 ICE(L) (mA) 10 –1 10 –2 10 –1 1 Collector photo current 10 10 2 ICE(L) (mA) Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR