WWW.PHIHONG.COM 60 Watt Universal 3-Wire Input Adapter PSC60M Power Supply meets CEC Compliance Features • Low Cost • CEC compliant* • Class B EMI Applications • Portable Equipment • Peripherals Safety Approvals • • cUL/UL60950-1 CE Mechanical Characteristics • Length: 130mm (5.12in) • Width: 60mm (2.36in) Output Specifications Model PSC60M-120* PSC60M-240* DC Output Voltage +12V +24V • • • Non-vented/Spill-proof Case No Load Power Consumption < 0.60W Low Profile Design • • Networking Gaming Machines • • TUV EN60950-1 Meeting Cal. Prop. 65 • • Load Min. 0A 0A Max. 5A 2.5A Height: 32mm (1.30in) Weight: 300g (10.58oz.) Ripple (1) P-P (max.) 120mV 240mV Regulation L-L ±5% ±5% (1) Measured with using 12-inch twisted pair terminated with a 10uF capacitor and 0.1uF ceramic in parallel. *PSC60M-120 is CEC Level III115VAC Compliant and PSC60M-240 is CEC Level IV115VAC Compliant Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit www.phihong.com for the most up-to-date specifications. PSC60M Characteristics INPUT: WWW.PHIHONG.COM AC Input Voltage Rating Over-current Protection 100 to 240VAC Output equipped with short circuit protection – auto restart AC Input Voltage Range 90 to 264VAC Short Circuit Protection Output can be shorted without damage AC Input Frequency 47/63Hz ENVIRONMENTAL: Temperature Input Current 1.6A (rms) Max. @ 115VAC 0.7A (rms) Max. @ 230VAC Operation Non-operation 0 to +40°C -5 to +80°C Humidity Leakage Current Operation 10 to 90% 250uA Max. @ 254VAC 60hz. Emissions Inrush Current (cold) 90A for 110VAC at Max. load 150A for 240VAC at Max. load (Cold start @ ambient 25°C) Input Power Saving < 0.60W for 240VAC at no load OUTPUT: Efficiency 84% minimum average efficiency Hold-up Time 10mS Min. @ 120VAC and Max. load Over-voltage Protection Output shuts down and recovers after reset AC power Dimension Diagram Unit: mm FCC Class B EN55022 Class B Dielectric Withstand (Hi-pot) Test Primary to Secondary: 1500VAC for 1 minute, 10mA DC Output Connector 2.1x5.5mm Center Positive Standard