Bulletin I2136 04/97 SAFEIR Series 30TPS.. PHASE CONTROL SCR VT < 1.3V @ 20A ITSM = 300A VRRM 800 to 1600V Description/Features The 30TPS.. SAFE IR series of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. The glass passivation technology used has reliable operation up to 125°C junction temperature. Typical applications are in input rectification (soft start) and these products are designed to be used with International Rectifier input diodes, switches and output rectifiers which are available in identical package outlines. Package Outline Major Ratings and Characteristics Characteristics I T(AV) Sinusoidal 30TPS.. Units 20 A 30 A up to 1600 V 300 A waveform I RMS VRRM/ VDRM I TSM VT 1.3 V dv/dt 500 V/µs di/dt 150 A/µs - 40 to 125 °C TJ @ 20 A, TJ = 25°C TO-247AC 1 30TPS.. SAFEIR Series Bulletin I2136 04/97 Voltage Ratings VRRM/VDRM, max. repetitive peak and off-state voltage VRSM , maximum non repetitive peak reverse voltage IRRM/IDRM 125°C V V mA 30TPS08 800 900 10 30TPS12 1200 1300 30TPS16 1600 1700 Part Number Absolute Maximum Ratings Parameters 30TPS.. Units IT(AV) Max. Average On-state Current 20 A IRMS Max. RMS On-state Current 30 ITSM Conditions @ TC = 95° C, 180° conduction half sine wave Max. Peak One Cycle Non-Repetitive 250 10ms Sine pulse, rated VRRM applied Surge Current 300 10ms Sine pulse, no voltage reapplied I2t Max. I2 t for Fusing 310 I √t Max. I √t for Fusing VTM Max. On-state Voltage Drop rt On-state Slope Resistance A2 s 442 2 10ms Sine pulse, no voltage reapplied A √s 2 t = 0.1 to 10ms, no voltage reapplied 1.3 V @ 20A, TJ = 25°C 12 mΩ VT(TO) Threshold Voltage 1.0 V IRM/I DM Max.Reverse and Direct 0.5 mA Leakage Current 10 IH Max. Holding Current 100 mA Anode Supply = 6V, Resistive load, Initial IT =1A IL Max. Latching Current 200 mA Anode Supply = 6V, Resistive load dv/dt Max. Rate of Rise of off-state Voltage 500 V/µs di/dt 150 A/µs 2 2 10ms Sine pulse, rated VRRM applied Max. Rate of Rise of turned-on Current 4420 TJ = 125°C TJ = 25 °C TJ = 125 °C VR = rated VRRM/ VDRM 30TPS.. SAFEIR Series Bulletin I2136 04/97 Triggering Parameters 30TPS.. Units 8.0 W PGM Max. Peak Gate Power Conditions PG(AV) Max. Average Gate Power 2.0 + IGM Max. Peak Positive Gate Current 1.5 A - VGM Max. Peak Negative Gate Voltage 10 V IGT Max. Required DC Gate Current 60 mA to Trigger 45 Anode supply = 6V, resistive load, TJ = 25°C 20 Anode supply = 6V, resistive load, TJ = 125°C VGT Max. Required DC Gate Voltage 2.5 to Trigger 2.0 Anode supply = 6V, resistive load, TJ = 25°C 1.0 Anode supply = 6V, resistive load, TJ = 125°C VGD Max. DC Gate Voltage not to Trigger IGD V Anode supply = 6V, resistive load, T J = - 10°C 0.25 Max. DC Gate Current not to Trigger Anode supply = 6V, resistive load, TJ = - 10°C TJ = 125°C, VDRM = rated value 2.0 mA 30TPS.. Units 0.9 µs TJ = 125°C, VDRM = rated value Switching Parameters tgt Typical Turn-on Time trr Typical Reverse Recovery Time tq Typical Turn-off Time 4 Conditions T J = 25°C T J = 125°C 110 Thermal-Mechanical Specifications Parameters 30TPS.. Units °C TJ Max. Junction Temperature Range - 40 to 125 Tstg Max. Storage Temperature Range - 40 to 125 RthJC Max. Thermal Resistance Junction 0.8 °C/W Conditions DC operation to Case RthJA Max. Thermal Resistance Junction 40 to Ambient RthCS Max. Thermal Resistance Case 0.2 Mounting surface, smooth and greased to Heatsink wt Approximate Weight T Mounting Torque Case Style 6 (0.21) g (oz.) Min. 6 (5) Kg-cm Max. 12 (10) (lbf-in) TO-247AC Jedec (Modified) 3 30TPS.. SAFEIR Series 30TPS.. Series R thJC (DC) = 0.8 °C/W 120 Conduction Angle 110 30° 60° 90° 100 120° 180° 90 0 5 10 15 20 25 30TPS.. Series R thJC (DC) = 0.8 °C/W 120 110 Conduction Period 100 30° 90 60° 90° 120° 180° DC 80 0 5 10 15 20 25 30 Average On-state Current (A) Fig. 2 - Current Rating Characteristics 180° 120° 90° 60° 30° 50 40 RMS Limit 30 20 Conduction Angle 30TPS.. Series TJ = 125°C 10 0 5 10 15 20 25 30 Maximum Average On-state Power Loss (W) Average On-state Current (A) 35 80 DC 180° 120° 90° 60° 30° 60 40 RMS Limit Conduction Period 20 30TPS.. Series T J = 125°C 0 0 10 20 30 40 50 Average On-state Current (A) Average On-state Current (A) Fig. 3 - On-state Power Loss Characteristics Fig. 4 - On-state Power Loss Characteristics 280 At Any Rated Load Condition And With Rated V RRM Applied Following Surge. 260 Initial TJ = 125°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 240 220 200 180 160 140 30TPS.. Series 120 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current 4 130 Fig. 1 - Current Rating Characteristics 60 0 Maximum Allowable Case Temperature (°C) 130 Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave On-state Current (A) Maximum Average On-state Power Loss (W) Maximum Allowable Case Temperature (°C) Bulletin I2136 04/97 300 280 260 240 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial T J= 125°C No Voltage Reapplied Rated VRRMReapplied 220 200 180 160 140 120 0.01 30TPS.. Series 0.1 1 Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current 30TPS.. SAFEIR Series Bulletin I2136 04/97 Instantaneous On-state Current (A) 1000 T J= 25°C T J= 125°C 100 10 30TPS.. Series 1 0 1 2 3 4 5 6 7 Instantaneous On-state Voltage (V) Transient Thermal Impedance Z thJC (°C/W) Fig. 7 - On-state Voltage Drop Characteristics 1 Steady State Value (DC Operation) D = 0.50 D = 0.33 D = 0.25 D = 0.17 0.1 D = 0.08 Single Pulse 30TPS.. Series 0.01 0.0001 0.001 0.01 0.1 1 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics Rectangular gate pulse a)Recommended load line for rated di/dt: 10 V, 20 ohms tr = 0.5 µs, tp >= 6 µs b)Recommended load line for <= 30% rated di/dt: 10 V, 65 ohms 10 tr = 1 µs, tp >= 6 µs (1) PGM = 40 W, tp = 1 ms (2) PGM = 20 W, tp = 2 ms (3) PGM = 8 W, tp = 5 ms (4) PGM = 4 W, tp = 10 ms (a) (b) VGD IGD 0.1 0.001 TJ = -10 °C TJ = 125 °C 1 TJ = 25 °C Instantaneous Gate Voltage (V) 100 (4) 30TPS.. Series 0.01 0.1 (3) (2) (1) Frequency Limited by PG(AV) 1 10 100 Instantaneous Gate Current (A) Fig. 9 - GateCharacteristics 5 30TPS.. SAFEIR Series Bulletin I2136 04/97 Outline Table 3. 65 (0 .144) 15.90 (0 .626 ) 3. 55 (0 .139) DIA. 15.30 (0 .602 ) 5.30 ( 0.20 9) 4.70 ( 0.185) 2.5 ( 0.098) 1.5 ( 0.059) 5.70 ( 0.22 5) 5.30 ( 0.208) 20 .30 ( 0.800) 19 .70 ( 0.775) 5.50 ( 0.217) 4. 50 ( 0.17 7) 1 2 (2 PLC S.) 3 14.80 ( 0.583) 4. 30 (0 .170) 14 .20 (0 .559) 3. 70 (0 .145) 2.20 ( 0.08 7) 1. 40 (0 .056) 2. 40 (0 .095) MAX . 1. 00 (0 .039) M AX. 0.80 ( 0.032) 0. 40 (0 .213) 10. 94 ( 0.430) 10 .86 ( 0.427) Dimensions in millimeters and inches Ordering Information Table Device Code 30 T P S 16 1 2 3 4 5 2 (A) 1 - Current Rating 2 - Circuit Configuration: 3 - Package: 4 - Type of Silicon: S = Standard Recovery Rectifier 08 = 800V 5 - Voltage code: Code x 100 = VRRM 12 = 1200V T = Thyristor 1 (K) (G) 3 T = TO-247 16 = 1600V 6