RMB962 miniature relays 1 • Height 15 mm • IP 67 • For PCB • Insulation 4 kV / 8 mm • High switching capacity, low power consumption • Bistable relays with two coils • DC coils • Terminals raster: type A - 3,2 mm for version 1 C/O, type A - 5,0 mm for version 1 NO ❶ • Recognitions, certifications, directives: RoHS, BISTABLE 2-COILS Contact data Number and type of contacts Contact material Max. switching voltage Min. switching voltage AC/DC 1 C/O, 1 NO AgSnO2, AgCdO, AgCdO/Au 3,5 µm 400 V / 300 V 24 V AgSnO2, 24 V AgCdO AgCdO/Au 3,5 µm - contact Relpol S.A. Rated load Min. switching current AC1 8 A / 250 V AC 100 mA AgSnO2, 100 mA AgCdO AgCdO/Au 3,5 µm - contact Relpol S.A. Max. inrush current Rated current Max. breaking capacity Min. breaking capacity AC1 10 A 8A 2 000 VA 2,4 W AgSnO2, 2,4 W AgCdO AgCdO/Au 3,5 µm - contact Relpol S.A. Contact resistance Max. operating frequency • at rated load • no load ≤ 100 mΩ AC1 3 600 cycles/hour 20 000 cycles/hour Coil data Rated voltage Operating range of supply voltage Duration of supply voltage pulse DC 3...24 V ❷ see Table 1 min. 10 ms; max. 5 s Insulation Insulation category Insulation rated voltage Insulation max. voltage Rated surge voltage Overvoltage category Insulation pollution degree Dielectric strength • between coil and contacts • contact clearance Contact - coil distance • clearance • creepage C250 250 V AC 400 V AC 4 000 V AC III PN-EN 60664-1 3 4 000 V AC 1 000 V AC ≥ 8 mm ≥ 8 mm General data Operating time (typical value) Release time (typical value) Electrical life • resistive AC1 • cos φ = 0,4 Mechanical life (cycles) Dimensions (L x W x H) Weight Ambient temperature • storage • operating Cover protection category Environmental protection Vibration resistance Solder bath temperature Soldering time 10 ms 7 ms 8 A, 250 V AC > 105 > 105 5 A, 250 V AC > 3 x 107 29 x 10 x 15 mm 10 g -40...+80 oC -40...+70 oC IP 67 RTII PN-EN 116000-3 10 g 10...100 Hz max. 270 oC max. 5 s The data in bold type pertain to the standard versions of the relays. Note: At IP 67 waterproof version it is recommended that the vent pin is removed after soldering and washing process. ❶ Relays with other rasters available - contact Relpol S.A. ❷ Supply of bistable relays RMB962 - see page 2 Export Sales Department Phone +48 68 47 90 832 • Marketing Department Phone +48 68 47 90 900 www.relpol.com.pl RMB962 2 miniature relays Supplying mode: energizing only in pulse mode. Min. pulse duration 10 ms; max. pulse duration 5 s. Terminals raster: type A 1 C/O - raster A (3,2 mm) 1 NO - raster A (5,0 mm) 1 C/O - raster A (3,2 mm) 1 NO - raster A (5,0 mm) Mounting openings raster ❶ (solder side view) 1 C/O - raster A (3,2 mm) Two coils circuit 1 NO - raster A (5,0 mm) Mounting Relays RMB962 (raster A (3,2 / 5,0 mm)) are designed for direct PCB mounting. www.relpol.com.pl Export Sales Department Phone +48 68 47 90 832 • Marketing Department Phone +48 68 47 90 900 RMB962 miniature relays 3 Ordering codes Cover protection category Type Type of raster Contact material Number and type of contacts Connection mode Coil code Coil type 2 - bistable, two coils Type of raster ❶ see Table 1 page 2 A - 3,2 / 5,0 mm raster Contact material 10 - AgCdO 12 - AgCdO/Au 3,5 µm 30 - AgSnO2 Number and type of contacts 11 - 1 C/O 21 - 1 NO Cover protection category 3 - in cover, IP 67 waterproof version ❶ Relays with other rasters available - contact Relpol S.A. Connection mode 5 - for PCB Examples of ordering codes: RMB962A-3011-35-1012 bistable relay RMB962 with two coils, contact material AgSnO2, with one changeover contact - raster type A (3,2 mm), in cover IP 67, for PCB, voltage version 12 V DC RMB962A-3021-35-1012 bistable relay RMB962 with two coils, contact material AgSnO2, with one normally open contact - raster type A (5,0 mm), in cover IP 67, for PCB, voltage version 12 V DC Export Sales Department Phone +48 68 47 90 832 • Marketing Department Phone +48 68 47 90 900 www.relpol.com.pl