EMERSON-NETWORKPOWER SSL40C

SSL40C Series
S i n g l e O u t p u t E x t e r n a l Pow e r S u p p l y
EXTERNAL AC/DC POWER SUPPLIES
•
•
•
•
•
•
•
40 W External AC/DC Power Supplies
1
4.65 x 2.40 x 1.08 inch enclosure
40 W continuous external power supply
Molded UL94V-0 plastic enclosure
Overvoltage and short circuit protection
EN55022, FCC conducted and radiated emissions level B
UL, CSA, VDE and CE safety approvals
Available RoHS compliant
The SSL40C series is a 40 W universal input ac-dc external Class II power supply in a
4.65 x 2.40 x 1.08 inch plastic enclosure. The SSL40C represents the next generation of
low cost external power supplies, suitable for a host of worldwide low power external
power applications. The SSL40C provides up to 40 W under natural convection cooling.
Standard features include universal ac input, overvoltage and short circuit protection
and meets EN55022 level B for conducted emissions. The SSL40C has several output
voltages available ranging from 12 V to 48 V. The series has full international safety
approvals and carries the CE mark to provide pre-approved SELV outputs.
2 YEAR WARRANTY
SPECIFICATIONS
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
OUTPUT SPECIFICATIONS
Total regulation
GENERAL SPECIFICATIONS
Main output
Line, load and
temperature coefficient
±5.0%
Overshoot/undershoot
Less than 10 ms
Transient response
Main output,
70% to 100%
full load step
±5.0% of nominal
voltage
Auto-recovery
140% nominal
Overvoltage protection
(See Note 5)
Short circuit protection
10%
Continuous
with auto-recovery
Minimum output current
0A
INPUT SPECIFICATIONS
Input voltage range
90-264 Vac
90 Vac
264 Vac
EN55022, FCC
EN55022, FCC
International Safety Standard Approvals
geprüfte
Sicherhelt
10 ms
Efficiency
115 Vac @ full load
80% typ.
Isolation voltage
Input/output
3000 Vac
Switching frequency
Fixed
72 kHz, typ.
Approvals and
standards (See Note 4)
EN60950, IEC950, UL1950
CSA C22.2 No. 950
Case material
General Electric Lexan, black
Flammability rating
UL94V-0
Weight
MTBF
Thermal performance
47-63 Hz
1.0 Arms max.
0.6 Arms max.
200 g (7 oz)
MIL-HDBK-217F
@ 25 °C
>150,000 hours
Operating, full load
0 °C to +40 °C
Non-operating
–10 °C to +85 °C
0 °C to +40 °C ambient,
Full load
convection cooled
Relative humidity
EMC CHARACTERISTICS
Radiated emissions
Conducted emissions
115 Vac @ full load
ENVIRONMENTAL SPECIFICATIONS
Universal input
Input frequency range
Input current
Hold-up time
Level B
Level B
Altitude
5% to 95% RH
Operating
Non-operating
Vibration (See Note 6)
5-500 Hz
Shock
per MIL-STD-810E
10,000 feet max.
30,000 feet max.
2.4 G (approx.)
516.4 Part IV
VDE0805/EN60950/IEC950 File No. 133084G
UL1950 File No. E136005
CSA C22.2 No. 950 File No. LR41062
File Name: ssl40c.pdf Rev (03): 07 Nov 2005
SSL40C Series
S i n g l e O u t p u t E x t e r n a l Pow e r S u p p l y
EXTERNAL AC/DC POWER SUPPLIES
40 W External AC/DC Power Supplies
2
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
OUTPUT CURRENTS
TOTAL
OVP
OUTPUT
VOLTAGE
MIN
MAX
+12 V
0A
3.00 A
3.6 A
120 mV
11.4-12.6 V
+15 V
0A
2.66 A
3.0 A
150 mV
+18 V
0A
2.22 A
2.6 A
180 mV
+24 V
0A
1.66 A
1.9 A
+48 V
0A
0.83 A
1.0 A
RIPPLE
PEAK
MODEL
(2)
(1)
REGULATION
(3)
(7,8)
(MAX)
NUMBER
16.8 V
SSL40C-7612J
14.25-15.75 V
21 V
SSL40C-7615J
17.1-18.9 V
25.2 V
SSL40C-7618J
240 mV
22.8-25.2 V
33.6 V
SSL40C-7624J
300 mV
45.6-50.4 V
64 V
SSL40C-7617J
Notes
2
3
4
5
Peak output current lasting less than 3 seconds and non repetitive. During
peak loading output voltage may exceed total regulation limits.
20 MHz bandwidth, peak to peak, measured using 0.1 µF ceramic capacitor
in parallel with a 10 µF tantalum capacitor at the point of output load.
Total regulation is defined as the static output regulation at 25 °C, including
initial tolerance, line voltage within stated limits, load currents within stated
limits, and output voltages adjusted to their factory settings.
To help maintain the power supply safety approvals, the IEC320/C7 input
connector cable must be rated minimum 3 A and approved by an
applicable safety agency for the intended country of use. National and
international variations on mains plugs, adapters and customer preference
to lead length prevents Artesyn from supplying an IEC320/C7 (or
compatible) input connector cable. The IEC320/C7 input (or compatible)
connector cable can be sourced locally, e.g. Newark, Qual Electronics,
Radio Shack, etc. or other non affiliated distributors.
This feature protects output circuitry from output overvoltage caused by
internal PSU failure.
6
7
8
Three orthogonal axes random vibration, 10 minute test for each axis.
The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.
TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool at
http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
SINGLE OUTPUT PIN CONNECTIONS 2.5 MM JACK PLUG
Inner
VA
Outer
Return
SWITCHCRAFT Power
Jack, P/N 712A or equiv.
INPUT CONNECTOR
IEC 320
Two pins
4.646 ±0.02 [118.0 ±0.5]
C8 type
Rated at 2.5 A, 250 Vac
1.083 +0.024
-0.000
27.5 +0.6
-0.0
Cable Length
36.00 ±0.79
[914.0 ±20]
2.402 ±0.02
[61.0 ±0.5]
1
0.098
[2.50]
2.5 mm Phone Jack
All Dimensions in inches [mm]
Datasheet © Artesyn Technologies® 2005
The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent
accompany the sale of any such product(s) or information contained herein.
www.artesyn.com
File Name: ssl40c.pdf Rev (03): 07 Nov 2005