STB45NF06 STP45NF06 N-channel 60 V, 0.023 Ω, 38 A TO-220, D2PAK STripFETTM II Power MOSFET Features Type VDSS RDS(on) ID STP45NF06 60 V <0.028 Ω 38 A STB45NF06 60 V <0.028 Ω 38 A ■ Exceptional dv/dt capability ■ Standard threshold drive ■ 100% avalanche tested 3 3 1 TO-220 1 2 D2PAK Applications ■ Switching application Description Figure 1. Internal schematic diagram These devices are an N-channel Power MOSFET realized with the latest development of STMicroelectronis unique "single feature size" strip-based process. The resulting transistors show extremely high packing density for low onresistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. Table 1. Device summary Order code Marking Package Packaging STP45NF06 P45NF06 TO-220 Tube B45NF06 D2PAK Tape and reel STB45NF06 July 2010 Doc ID 7433 Rev 5 1/15 www.st.com 15 Contents STB45NF06, STP45NF06 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2/15 .............................................. 8 Doc ID 7433 Rev 5 STB45NF06, STP45NF06 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter VDS Drain-source voltage (VGS = 0) VGS Gate-source voltage Value Unit 60 V ± 20 V ID Drain current (continuous) at TC = 25°C 38 A ID Drain current (continuous) at TC = 100°C 26 A IDM(1) Drain current (pulsed) 152 A PTOT Total dissipation at TC = 25°C 80 W 0.53 W/°C 8 V/ns -55 to 175 °C Derating factor dv/dt(2) TJ Tstg Peak diode recovery voltage slope Operating junction temperature Storage temperature 1. Pulse width limited by safe operating area. 2. ISD ≤38A, di/dt ≤300A/µs, VDD ≤V(BR)DSS, Tj ≤TJMAX. Table 3. Thermal data Value Symbol Rthj-case Rthj-a Rthj-pcb(1) Tl Parameter D2PAK Unit TO-220 Thermal resistance junction-case max 1.87 Thermal resistance junction-ambient max 62.5 °C/W 300 °C Thermal resistance junction - pcb max Maximum lead temperature for soldering purpose 35 1. When mounted on 1 inch2 FR-4 2 oz Cu board. Table 4. Avalanche characteristics Symbol Parameter Value Unit IAR Avalanche current, repetitive or not-repetitive (pulse width limited by Tj max) 19 A EAS Single pulse avalanche energy (starting Tj=25°C, Id=Iar, Vdd=40 V) 260 mJ Doc ID 7433 Rev 5 3/15 Electrical characteristics 2 STB45NF06, STP45NF06 Electrical characteristics (TCASE=25°C unless otherwise specified). Table 5. Symbol V(BR)DSS On/off states Parameter Test conditions Drain-source breakdown voltage ID = 250µA, VGS= 0 Zero gate voltage drain current (VGS = 0) IGSS Gate body leakage current (VDS = 0) VGS = ±20V VGS(th) Gate threshold voltage VDS= VGS, ID = 250µA RDS(on) Static drain-source on resistance VGS= 10V, ID= 19A Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd Typ. Max. 60 VDS = Max rating @125°C 2 Unit V VDS = Max rating, IDSS Table 6. Min. 3 1 10 µA µA ±100 nA 4 V 0.023 0.028 Ω Dynamic Parameter Test conditions Min. Typ. Max. Unit Forward transconductance VDS > ID(on) x RDS(on)max, ID =19 A - 18 S Input capacitance Output capacitance Reverse transfer capacitance VDS =25V , f=1 MHz, VGS=0 - 920 225 80 pF pF pF Total gate charge Gate-source charge Gate-drain charge VDD = 48 V, ID = 34 A VGS = 10V 58 - 32 6.5 14.5 nC nC nC Typ. Max. Unit 1. Pulsed: pulse duration=300µs, duty cycle 1.5% Table 7. Symbol td(on) tr td(off) tf 4/15 Switching times Parameter Turn-on delay time rise time Turn-off delay time fall time Test conditions VDD=30 V, ID=17 A, RG=4.7 Ω, VGS= 10 V (see Figure 13) VDD=30V, ID=17 A, RG=4.7 Ω, VGS=10 V (see Figure 13) Doc ID 7433 Rev 5 Min. 12 50 ns ns 30 10 ns ns STB45NF06, STP45NF06 Table 8. Symbol Electrical characteristics Source drain diode Max. Unit Source-drain current 38 A ISDM(1) Source-drain current (pulsed) 152 A VSD(2) Forward on voltage 1.5 V ISD trr Qrr IRRM Parameter Test conditions Min. Typ. ISD = 38 A, VGS=0 Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 34 A, di/dt = 100A/µs, VDD = 10 V, Tj = 150°C (see Figure 15) 65 150 5 ns nC A 1. Pulsed: pulse duration=300µs, duty cycle 1.5% 2. Pulse width limited by safe operating area. Doc ID 7433 Rev 5 5/15 Electrical characteristics STB45NF06, STP45NF06 2.1 Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Thermal impedance Figure 4. Output characteristics Figure 5. Transfer characteristics Figure 6. Normalized breakdown voltage vs. temperature Figure 7. Static drain-source on resistance 6/15 Doc ID 7433 Rev 5 STB45NF06, STP45NF06 Figure 8. Electrical characteristics Gate charge vs. gate-source voltage Figure 9. Figure 10. Normalized gate threshold voltage vs. temperature Capacitance variations Figure 11. Normalized on resistance vs. temperature Figure 12. Source-drain diode forward characteristics Doc ID 7433 Rev 5 7/15 Test circuits 3 STB45NF06, STP45NF06 Test circuits Figure 13. Switching times test circuit for resistive load Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped Inductive load test switching and diode recovery times circuit Figure 17. Unclamped inductive waveform 8/15 Figure 18. Switching time waveform Doc ID 7433 Rev 5 STB45NF06, STP45NF06 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. Doc ID 7433 Rev 5 9/15 Package mechanical data STB45NF06, STP45NF06 TO-220 MECHANICAL DATA DIM. mm. MIN. inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 10/15 TYP 0.154 0.645 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 Doc ID 7433 Rev 5 STB45NF06, STP45NF06 Package mechanical data D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 10.4 0.393 D1 E 8 10 E1 0.315 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 R 0º 0.126 0.015 4º 3 V2 0.4 1 Doc ID 7433 Rev 5 11/15 Packaging mechanical data 5 STB45NF06, STP45NF06 Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 MAX. B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 * on sales type 12/15 Doc ID 7433 Rev 5 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 STB45NF06, STP45NF06 Packaging mechanical data D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. inch DIM. MAX. MIN. A MIN. 4.4 TYP 4.6 0.173 TYP. 0.181 MAX. A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 D1 E 8 10 10.4 0.393 4.88 5.28 0.192 0.208 E1 G 0.368 0.315 8.5 0.334 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 0.126 R 0.4 0º 0.015 4º 3 V2 1 Doc ID 7433 Rev 5 13/15 Revision history 6 STB45NF06, STP45NF06 Revision history Table 9. 14/15 Revision history Date Revision Changes 09-Sep-2004 1 Preliminary version. 04-Feb-2005 2 Complete version. 17-Aug-2006 3 New template. No content change. 13-Nov-2006 4 Inserted new value. 05-Jul-2010 5 Updated Section 2.1: Electrical characteristics (curves). Doc ID 7433 Rev 5 STB45NF06, STP45NF06 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 7433 Rev 5 15/15