STMICROELECTRONICS STL128DNFP

STL128DN
High voltage fast-switching NPN power transistor
Features
TAB
■
High voltage capability
■
Low spread of dynamic parameters
■
Very high switching speed
■
Large RBSOA
■
Integrated antiparallel collector-emitter diode
■
2
1
TO-220
2
TO-220FP
TAB
Applications
■
3
3
1
Electronic ballast for fluorescent lighting
3
1
Flyback and forward single transistor low
power converters
TO-252 (DPAK)
Description
Figure 1.
Internal schematic diagram
The device is manufactured using high voltage
multi epitaxial planar technology for high switching
speeds and medium voltage capability. It uses a
cellular emitter structure with planar edge
termination to enhance switching speeds while
maintaining the wide RBSOA. The device is
designed for use in lighting applications and low
cost switch-mode power supplies.
Table 1.
Device summary
Order codes
Marking
Packages
Packaging
STL128DN
L128DN
TO-220
Tube
STL128DNFP
L128DNFP
TO-220FP
Tube
STLD128DNT4
LD128DN
DPAK
Tape and reel
October 2009
Doc ID 13984 Rev 3
1/14
www.st.com
14
Content
STL128DN
Content
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2/14
Doc ID 13984 Rev 3
STL128DN
1
Electrical ratings
Electrical ratings
Table 2.
Absolute maximum ratings
Symbol
Parameter
Value
Unit
VCES
Collector-emitter voltage (VBE = 0)
700
V
VCEO
Collector-emitter voltage (IB = 0)
400
V
VEBO
Base-emitter voltage (IC = 0, IB = 2 A, tP < 10 µs)
V(BR)EBO
V
Collector current
4
A
Collector peak current (tP < 5 ms)
8
A
Base current
2
A
Base peak current (tP < 5 ms)
4
A
Total dissipation at Tc = 25 °C for TO-220
60
W
Total dissipation at Tc = 25 °C for TO-220FP
28
W
Total dissipation at Tc = 25 °C for DPAK
20
W
-65 to 150
°C
150
°C
IC
ICM
IB
IBM
PTOT
Tstg
TJ
Table 3.
Storage temperature
Max. operating junction temperature
Thermal data
Symbol
Parameter
TO-220
TO-220FP
DPAK
Unit
RthJC
Thermal resistance junction-case max
2.08
4.46
6.25
°C/W
Doc ID 13984 Rev 3
3/14
Electrical characteristics
2
STL128DN
Electrical characteristics
Tcase = 25 °C unless otherwise specified
Table 4.
Symbol
Electrical characteristics
Parameter
Test conditions
ICES
Collector cut-off
current (VBE = 0)
VCE = 700 V
VCE = 700 V
ICEO
Collector cut-off
current (IB = 0)
VCE = 400 V
Emitter-base
breakdown voltage
(IC = 0)
IE = 10 mA
9
IC = 10 mA
400
V(BR)EBO
Collector-emitter
VCEO(sus)(1) sustaining voltage
(IB = 0)
Tc = 125 °C
Typ.
Max.
Unit
100
500
µA
µA
250
µA
18
V
V
VCE(sat)(1)
Collector-emitter
saturation voltage
IC = 1 A
IC = 2 A
IB = 0.2 A
IB = 0.4 A
0.5
1
V
V
VBE(sat)(1)
Base-emitter
saturation voltage
IC = 1 A
IC = 2 A
IB = 0.2 A
IB = 0.4 A
1.2
1.3
V
V
DC current gain
IC = 10 mA
IC = 2 A
VCE = 5 V
VCE = 5 V
VF
Diode forward voltage
IF = 1 A
2.5
V
ts
tf
Resistive load
Storage time
Fall time
IB1 = - IB2 = 0.2 A
IC = 1 A
VCC = 125 V
tp = 20 µs
4.5
0.4
µs
µs
hFE(1)
1. Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 %.
4/14
Min.
Doc ID 13984 Rev 3
10
8
24
STL128DN
Electrical characteristics
2.1
Electrical characteristics (curves)
Figure 2.
Safe operating area for TO-220
Figure 3.
Safe operating area for TO-220FP
Figure 4.
Safe operating area for DPAK
Figure 5.
Derating curve
Figure 6.
DC current gain (VCE = 1 V)
Figure 7.
DC current gain (VCE = 5 V)
Doc ID 13984 Rev 3
5/14
Electrical characteristics
Figure 8.
STL128DN
Collector-emitter saturation voltage Figure 9.
Figure 10. Freewheel diode forward voltage
Figure 11. Resistive load switching time
Figure 12. Reverse biased safe operating area
6/14
Base-emitter saturation voltage
Doc ID 13984 Rev 3
STL128DN
3
Test circuit
Test circuit
Figure 13. Resistive load switching test circuit
1. Fast electronic switch
2. Non-inductive resistor
Doc ID 13984 Rev 3
7/14
Package mechanical data
4
STL128DN
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
8/14
Doc ID 13984 Rev 3
STL128DN
Package mechanical data
TO-220 type A mechanical data
mm
Dim
Min
A
b
b1
c
D
D1
E
e
e1
F
H1
J1
L
L1
L20
L30
∅P
Q
Typ
4.40
0.61
1.14
0.48
15.25
Max
4.60
0.88
1.70
0.70
15.75
1.27
10
2.40
4.95
1.23
6.20
2.40
13
3.50
10.40
2.70
5.15
1.32
6.60
2.72
14
3.93
16.40
28.90
3.75
2.65
3.85
2.95
0015988_Rev_S
Doc ID 13984 Rev 3
9/14
Package mechanical data
STL128DN
TO-220 type E mechanical data
mm
Dim
Min
A
b
b1
c
D
E
e
e1
F
H1
J1
L
L1
L20
øP
Q
10/14
Typ
4.47
0.70
1.17
0.31
14.60
9.96
4.98
1.17
6.10
2.52
12.70
3.20
15.21
3.73
2.59
Doc ID 13984 Rev 3
Max
4.67
0.91
1.37
0.53
15.70
10.36
2.54
5.08
5.18
1.37
6.80
2.82
13.80
3.96
16.77
3.94
2.89
STL128DN
Package mechanical data
TO-220FP mechanical data
mm
Dim.
Min.
Typ.
Max.
A
4.4
4.6
B
2.5
2.7
D
2.5
2.75
E
0.45
0.7
F
0.75
1
F1
1.15
1.70
F2
1.15
1.5
G
4.95
5.2
G1
2.4
2.7
H
10
10.4
L2
16
L3
28.6
30.6
L4
9.8
10.6
L5
2.9
3.6
L6
15.9
16.4
L7
9
9.3
Dia
3
3.2
L7
E
A
B
D
Dia
L5
L6
F1
F2
F
G
H
G1
L4
L2
L3
7012510_Rev_J
Doc ID 13984 Rev 3
11/14
Package mechanical data
STL128DN
TO-252 (DPAK) mechanical data
DIM.
mm.
min.
ty p
ma x .
A
2.20
2.40
A1
0.90
1.10
A2
0.03
0.23
b
0.64
0.90
b4
5.20
5.40
c
0.45
0.60
c2
0.48
0.60
D
6.00
6.20
D1
E
5.10
6.40
6.60
E1
4. 70
e
2.28
e1
4.40
4.60
H
9.35
10.10
L
1
L1
2.80
L2
L4
0.80
0.60
1
R
V2
0.20
8o
0o
0068772_G
12/14
Doc ID 13984 Rev 3
STL128DN
5
Revision history
Revision history
Table 5.
Document revision history
Date
Revision
Changes
04-Oct-2007
1
First release
14-Feb-2008
2
Updated TO-220, type E, mechanical data
01-Oct-2009
3
Updated: collector and base current values Table 2 on page 3,
VCE(sat) maximum values Table 4 on page 4.
Doc ID 13984 Rev 3
13/14
STL128DN
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2009 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
14/14
Doc ID 13984 Rev 3