STB10NK60Z/-1- STP10NK60Z STP10NK60ZFP - STW10NK60Z N-channel 600V - 0.65Ω - 10A - I2/D2PAK - TO-220/FP - TO-247 Zener-protected SuperMESH™ Power MOSFET General features Type VDSS @TjMax RDS(on) ID Pw STB10NK60Z-1 650V <0.75Ω 10A 115W STB10NK60Z 650V <0.75Ω 10A 115W STP10NK60Z 650V <0.75Ω 10A 115W STP10NK60ZFP 650V <0.75Ω 10A 35W STW10NK60Z 650V <0.75Ω 10A 156W 3 12 TO-247 TO-262 3 1 TO-263 3 ■ Extremely high dv/dt capability ■ 100% Avalanche tested ■ Gate charge minimized ■ Very good manufacturing repeability 1 3 2 TO-220FP 1 2 TO-220 Internal schematic diagram Description The SuperMESH™ series is obtained through an extreme optimization of ST’s well established strip-based PowerMESH™ layout. In addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications. Applications ■ Switching application Order codes Part number Marking Package Packaging STB10NK60Z-1 B10NK60Z I²PAK Tube STB10NK60ZT4 B10NK60Z D²PAK Tape & reel STP10NK60ZFP P10NK60ZFP TO-220FP Tube STP10NK60Z P10NK60Z TO-220 Tube STW10NK60Z W10NK60Z TO-247 Tube September 2006 Rev 9 1/19 www.st.com 19 Contents STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1 Electrical characteristics (curves) ........................... 7 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2/19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Value Symbol Parameter Unit TO-220 TO-220FP D²/I²PAK VDS Drain-source voltage (VGS = 0) 600 VGS Gate-source voltage ± 30 ID Drain current (continuous) at TC = 25°C 10 10 TO-247 V V (1) 10 A (1) 5.7 A Drain current (continuous) at TC = 100°C 5.7 5.7 IDM (2) Drain current (pulsed) 36 36 (1) 36 A PTOT Total dissipation at TC = 25°C 115 35 156 W Derating factor 0.92 0.28 1.25 W/°C ID Vesd(G-S) G-S ESD (HBM C=100pF, R=1.5kΩ) dv/dt (3) Peak diode recovery voltage slope VISO Insulation withstand volatge (DC) Tj Tstg Operating junction temperature Storage temperature 4000 V 4.5 V/ns -- 2500 -- -55 to 150 V °C 1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD <10A, di/dt < 200A/µs, VDD =80% V(BR)DSS Table 2. Thermal data TO-220 I²PAK Rthj-case Thermal resistance junction-case Max Rthj-pcb Thermal resistance junction-pcb Max (when mounted on minimum footprint) Rthj-amb Thermal resistance junction-amb Max Tl Maximum lead temperature for soldering purpose D²PAK TO-220FP TO-247 1.09 3.6 0.8 60 Unit °C/W °C/W 62.5 50 300 °C/W °C 3/19 Electrical ratings Table 3. Symbol 4/19 STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z Avalanche characteristics Parameter Max value Unit 9 A IAR Avalanche current, repetitive or not-repetitive (pulse width limited by Tj max) EAS Single pulse avalanche energy (starting Tj=25°C, ID=IAR, VDD= 50V) 300 mJ EAR Repetitive avalanche energy (pulse width limited by Tj max) 3.5 mJ STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z 2 Electrical characteristics Electrical characteristics (Tcase =25°C unless otherwise specified) Table 4. Symbol V(BR)DSS On /off states Parameter Test conditions Drain-source breakdown ID = 250µA, VGS= 0 voltage Min. Typ. Max. Unit 600 V IDSS Zero gate voltage drain current (VGS = 0) VDS = Max rating, VDS = Max rating, Tj=125°C 1 50 µA µA IGSS Gate body leakage current (VDS = 0) VGS = ±15V, VDS = 0 ±10 µA VGS(th) Gate threshold voltage VDS= VGS, ID = 250 µA 3.75 4.5 V RDS(on) Static drain-source on resistance VGS= 10 V, ID= 4.5 A 0.65 0.75 Ω Typ. Max. Unit Table 5. Symbol Dynamic Parameter Test conditions gfs (1) Forward transconductance VDS =15V, ID = 4.5A Ciss Coss Crss Input capacitance Output capacitance Reverse transfer capacitance VDS =25V, f=1 MHz, VGS=0 Equivalent ouput capacitance Total gate charge Gate-source charge Gate-drain charge Coss eq(2) Qg Qgs Qgd 3 Min. 7.8 S 1370 156 37 pF pF pF VGS=0, VDS =0V to 480V 90 pF VDD=480V, ID = 8A VGS =10V (see Figure 19) 50 10 25 70 nC nC nC 1. Pulsed: pulse duration = 300µs, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% 5/19 Electrical characteristics STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z Table 6. Switching times Symbol Parameter Test conditions Min. Typ. Max Unit td(on) tr Turn-on delay time Rise time VDD=300 V, ID=4A, RG=4.7Ω, VGS=10V (see Figure 20) 20 20 ns ns td(off) tf Turn-off delay time Fall time VDD=300 V, ID=4A, RG=4.7Ω, VGS=10V (see Figure 20) 55 30 ns ns tr(Voff) tf tc Off-voltage rise time Fall time Cross-over time VDD=480 V, ID=8A, RG=4.7Ω, VGS=10V (see Figure 20) 18 18 36 ns ns ns Table 7. Source drain diode Symbol Parameter ISD ISDM(1) Source-drain current Source-drain current (pulsed) VSD(2) Forward on voltage ISD=10A, VGS=0 Reverse recovery time Reverse recovery charge Reverse recovery current ISD=8A, di/dt = 100A/µs, VDD=40 V, Tj=150°C trr Qrr IRRM Test conditions Min. Typ. 570 4.3 15 Max. Unit 10 36 A A 1.6 V ns µC A 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration = 300µs, duty cycle 1.5% Table 8. Symbol BVGSO(1) Gate-source zener diode Parameter Gate-source breakdown voltage Test conditions Igs=± 1mA (open drain) Min Typ Max Unit 30 1. The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device’s ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device’s integrity. These integrated Zener diodes thus avoid the usage of external components 6/19 V STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z Electrical characteristics 2.1 Electrical characteristics (curves) Figure 1. Safe operating area for TO-220 / I²PAK / D²PAK Figure 2. Thermal impedance for TO-220 / I²PAK / D²PAK Figure 3. Safe operating area for TO-247 Figure 4. Thermal impedance for TO-247 Figure 5. Safe operating area for TO-220FP Figure 6. Thermal impedance for TO-220FP 7/19 Electrical characteristics STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z Figure 7. Output characterisics Figure 8. Transfer characteristics Figure 9. Transconductance Figure 10. Static drain-source on resistance Figure 11. Gate charge vs gate-source voltage Figure 12. Capacitance variations 8/19 STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z Electrical characteristics Figure 13. Normalized gate threshold voltage vs temperature Figure 14. Normalized on resistance vs temperature Figure 15. Source-drain diode forward characteristics Figure 16. Maximum avalanche energy vs temperature Figure 17. Normalized BVDSS vs temperature 9/19 Test circuits 3 STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z Test circuits Figure 18. Switching times test circuit for resistive load Figure 19. Gate charge test circuit Figure 20. Test circuit for inductive load Figure 21. Unclamped Inductive load test switching and diode recovery times circuit Figure 22. Unclamped inductive waveform 10/19 Figure 23. Switching time waveform STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 11/19 Package mechanical data STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z TO-220 MECHANICAL DATA DIM. mm. MIN. inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 12/19 TYP 0.154 0.645 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z Package mechanical data TO-220FP MECHANICAL DATA mm. DIM. MIN. A 4.4 inch TYP MAX. MIN. TYP. 4.6 0.173 0.181 MAX. 0.106 B 2.5 2.7 0.098 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 9 9.3 0.354 0.366 Ø 3 3.2 0.118 0.126 B D A E L7 L3 L6 F2 H G G1 F F1 L7 L2 L5 1 2 3 L4 13/19 Package mechanical data STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z TO-247 MECHANICAL DATA DIM. mm. MIN. inch MAX. MIN. TYP. MAX. A 4.85 5.15 0.19 0.20 A1 2.20 2.60 0.086 0.102 b 1.0 1.40 0.039 0.055 b1 2.0 2.40 0.079 0.094 0.134 b2 3.0 3.40 0.118 c 0.40 0.80 0.015 0.03 D 19.85 20.15 0.781 0.793 E 15.45 15.75 0.608 e 5.45 0.620 0.214 L 14.20 14.80 0.560 L1 3.70 4.30 0.14 L2 18.50 0.582 0.17 0.728 øP 3.55 3.65 0.140 0.143 øR 4.50 5.50 0.177 0.216 S 14/19 TYP 5.50 0.216 STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z Package mechanical data TO-262 (I2PAK) MECHANICAL DATA mm. inch DIM. MAX. MIN. A 4.40 MIN. TYP 4.60 0.173 TYP. MAX. A1 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.034 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 c2 1.23 1.32 0.048 0.052 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0.393 0.410 0.181 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L2 1.27 1.40 0.050 0.055 15/19 Package mechanical data STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 10.4 0.393 D1 E 8 10 E1 0.315 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 R 0º 0.126 0.015 4º 3 V2 0.4 1 16/19 STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z 5 Package mechanical data Package mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 MAX. R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 * on sales type 17/19 Revision history 6 STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z Revision history Table 9. 18/19 Revision history Date Revision Changes 29-Sep-2005 6 Inserted ecopack indication 29-Oct-2005 7 New value inserted in Table 5 11-Apr-2006 8 New template 19-Sep-2006 9 Unit changed in Table 4 STB10NK60Z - STB10NK60Z-1 - STP10NK60Z/FP - STW10NK60Z Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 19/19