STB141NF55 - STB141NF55-1 STP141NF55 N-channel 55V - 0.0065Ω - 80A - D2PAK - I2PAK - TO-220 STripFET™ II Power MOSFET Features Type VDSS RDS(on) ID (1) STB141NF55 55V <0.008Ω 80A STB141NF55-1 55V <0.008Ω 80A STP141NF55 55V <0.008Ω 80A 3 1. Current limited by package 1 2 TO-220 Description This Power MOSFET is the latest development of STMicroelectronics unique “Single Feature Size” strip-based process. The resulting transistor shows extremely high packing density for low onresistance, rugged avalance characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. Figure 1. 3 3 12 1 D²PAK I²PAK Internal schematic diagram Applications ■ Motor control ■ High current, switching application ■ Automotive environment Table 1. Device summary Order code Marking Package Packaging STB141NF55 B141NF55 D²PAK Tape & reel STB141NF55-1 B141NF55 I²PAK Tube STP141NF55 P141NF55 TO-220 Tube August 2007 Rev 1 1/15 www.st.com Contents STB141NF55 - STB141NF55-1 - STP141NF55 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2/15 ................................................ 8 STB141NF55 - STB141NF55-1 - STP141NF55 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Symbol Parameter Value Unit VDS Drain-source voltage (VGS = 0) 55 V VGS Gate- source voltage ±20 V Drain current (continuous) at TC = 25°C 80 A Drain current (continuous) at TC = 100°C 80 A Drain current (pulsed) 320 A Total dissipation at TC = 25°C 300 W Derating factor 2 W/°C Peak diode recovery voltage slope 10 V/ns Single pulse avalance energy 1.3 J –55 to 175 °C ID (1) ID (1) IDM (2) PTOT dv/dt (3) EAS (4) Tstg Tj Storage temperature Operating junction temperature 1. Current limited by package 2. Pulse width limited by safe operating area 3. ISD < 80A, di/dt < 300A/µs, VDD=80%V(BR)DSS 4. Starting Tj = 25°C, ID = 40A, VDD = 30V Table 2. Thermal data Value Symbol Parameter Unit TO-220 - I²PAK Rthj-case Thermal resistance junction-case max Rthj-amb Thermal resistance junction-ambient max Rthj-pcb (1) Thermal resistance junction-pcb max Tl Maximum lead temperature for soldering purpose (for 10 sec, 1.6mm from case) D²PAK 0.5 °C/W 62.5 -- °C/W -- 35 °C/W 300 °C 1. When mounted on 1 inch², FR4 board, 2 oz Cu 3/15 Electrical characteristics 2 STB141NF55 - STB141NF55-1 - STP141NF55 Electrical characteristics (TCASE = 25°C unless otherwise specified) Table 3. On/off states Symbol Parameter V(BR)DSS Drain-source breakdown voltage ID = 250 µA, VGS = 0 IDSS Zero gate voltage drain current (VGS = 0) VDS = Max rating VDS = Max rating, TC = 125 °C IGSS Gate-body leakage current (VDS = 0) VGS = ±20V VGS(th) Gate threshold voltage VDS = VGS, ID = 250µA RDS(on) Static drain-source on resistance VGS = 10 V, ID = 40 A Table 4. Test conditions Typ. Max. Unit 55 2 V 3 1 10 µA µA ±100 nA 4 V 0.0065 0.008 Ω Dynamic Symbol Parameter Test conditions gfs (1) Forward transconductance VDS = 15V, ID= 40 A 100 S Ciss Coss Crss Input capacitance Output capacitance Reverse transfer capacitance VDS = 25V, f = 1 MHz VGS = 0 5300 1000 290 pF pF pF Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge VDD = 44V, ID= 80A VGS =10V (see Figure 14) 142 27 55 nC nC nC 1. Pulsed: pulse duration = 300µs, duty cycle 1.5% 4/15 Min. Min. Typ. Max. Unit STB141NF55 - STB141NF55-1 - STP141NF55 Table 5. Symbol Electrical characteristics Switching times Parameter Test conditions Min. Typ. Max. Unit td(on) tr Turn-on delay time Rise time VDD = 27.5 V, ID = 40A RG = 4.7Ω , VGS = 10V (see Figure 13) 30 150 ns ns td(off) tf Turn-off-delay time Fall time VDD = 27.5V, ID = 40A, RG = 4.7Ω, VGS = 10V (see Figure 13) 125 45 ns ns Table 6. Source drain diode Symbol Parameter ISD ISDM (1) Source-drain current Source-drain current (pulsed) VSD (2) Forward on voltage ISD = 80A, VGS = 0 Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 80A, di/dt = 100 A/µs, VDD = 20V, Tj = 150°C (see Figure 15) trr Qrr IRRM Test conditions Min. Typ. 90 275 6.5 Max. Unit 80 320 A A 1.5 V ns nC A 1. Pulse width limited safe operating area 2. Pulsed: pulse duration = 300µs, duty cycle 1.5% 5/15 Electrical characteristics STB141NF55 - STB141NF55-1 - STP141NF55 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characteristics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance 6/15 STB141NF55 - STB141NF55-1 - STP141NF55 Electrical characteristics Figure 7. Gate charge vs gate-source voltage Figure 8. Figure 9. Normalized gate threshold voltage vs temperature Figure 11. Source-drain diode forward characteristics Capacitance variations Figure 10. Normalized on resistance vs temperature Figure 12. Normalized BVDSS vs temperature 7/15 Test circuit 3 STB141NF55 - STB141NF55-1 - STP141NF55 Test circuit Figure 13. Switching times test circuit for resistive load Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test switching and diode recovery times circuit Figure 17. Unclamped inductive waveform 8/15 Figure 18. Switching time waveform STB141NF55 - STB141NF55-1 - STP141NF55 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/15 Package mechanical data STB141NF55 - STB141NF55-1 - STP141NF55 TO-220 mechanical data mm inch Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 θP Q 10/15 Typ 4.40 0.61 1.14 0.49 15.25 Max Min 4.60 0.88 1.70 0.70 15.75 0.173 0.024 0.044 0.019 0.6 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 Max 0.181 0.034 0.066 0.027 0.62 0.050 16.40 28.90 3.75 2.65 Typ 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 3.85 2.95 0.147 0.104 0.151 0.116 STB141NF55 - STB141NF55-1 - STP141NF55 Package mechanical data TO-262 (I2PAK) MECHANICAL DATA mm. inch DIM. MAX. MIN. A 4.40 MIN. TYP 4.60 0.173 TYP. MAX. A1 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.034 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 0.181 c2 1.23 1.32 0.048 0.052 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0.393 0.410 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L2 1.27 1.40 0.050 0.055 11/15 Package mechanical data STB141NF55 - STB141NF55-1 - STP141NF55 D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. inch DIM. MAX. MIN. A MIN. 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 D1 E TYP 8 10 E1 TYP. MAX. 0.315 10.4 0.393 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 0.126 R 0º 0.015 4º 3 V2 0.4 1 12/15 STB141NF55 - STB141NF55-1 - STP141NF55 5 Packaging mechanical data Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 MAX. R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 * on sales type 13/15 Revision history 6 STB141NF55 - STB141NF55-1 - STP141NF55 Revision history Table 7. 14/15 Document revision history Date Revision 01-Aug-2007 1 Changes Initial release. STB141NF55 - STB141NF55-1 - STP141NF55 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 15/15