Wireless Components Dual LNA PMB 2362 Version 1.1 Specification January 2000 preliminary CONFIDENTIAL Revision History: Current Version: January 2000 Previous Version:Data Sheet Page (in previous Version) Page (in current Version) Subjects (major changes since last revision) ABM®, AOP®, ARCOFI®, ARCOFI®-BA, ARCOFI®-SP, DigiTape®, EPIC®-1, EPIC®-S, ELIC®, FALC®54, FALC®56, FALC®-E1, FALC®-LH, IDEC®, IOM®, IOM®-1, IOM®-2, IPAT®-2, ISAC®-P, ISAC®-S, ISAC®-S TE, ISAC®-P TE, ITAC®, IWE®, MUSAC®-A, OCTAT®-P, QUAT®-S, SICAT®, SICOFI®, SICOFI®2, SICOFI®-4, SICOFI®-4µC, SLICOFI® are registered trademarks of Infineon Technologies AG. ACE™, ASM™, ASP™, POTSWIRE™, QuadFALC™, SCOUT™ are trademarks of Infineon Technologies AG. Edition 03.99 Published by Infineon Technologies AG i. Gr., SC, Balanstraße 73, 81541 München © Infineon Technologies AG i. Gr. 26.01.00. All Rights Reserved. Attention please! As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies AG is an approved CECC manufacturer. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components1 of the Infineon Technologies AG, may only be used in life-support devices or systems2 with the express written approval of the Infineon Technologies AG. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that lifesupport device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. PMB 2362 preliminary Product Info Confidential Product Info General Description Features Application Ordering Information Wireless Components Package The PMB2362 is a dual band LNA circuit with excellent performance and minimum component count for GSM900 and GSM1800. ■ Worldclass B6HF technology, fT = 25GHz ■ Lowest external component count ■ Extreme small outline P-TSSOP-10-2 package with heat sink for grounding ■ Both LNAs with prematched input, only 2 external matching components required ■ GSM900 LNA output matched to 50 Ohm ■ Both LNAs with switchable gain, 20dB gain step ■ LNA1: 17dB gain, 1.5dB noise figure @ 0.95GHz ■ LNA2: 19dB gain, 2.0dB noise figure @ 1.85GHz ■ Dual band wireless frontends GSM900/1800 P TSSOP 10 ■ Supply voltage range from 2.7V to 3.6V ■ Power down function ■ Temperature range -40° to 85°C ■ Excellent combination with Infineon GSM single chip SMARTi PMB 6250 Type Ordering Code Package PMB 2362 V1.1 T2362-XV11-P1-7600 P-TSSOP-10-2 Product Info Specification, January 2000 1 Table of Contents 1 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 2 2.1 2.2 2.3 2.4 Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Package Outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 3 3.1 3.2 3.3 3.4 Functional Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Pin Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Pin Definition and Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Functional Block Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Circuit Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 4 4.1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 5 5.1 5.2 5.3 5.4 5.5 5.6 Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Absolute Maximum Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Operating Ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 AC/DC Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Test Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 S-Parameters / Noise Parameters / Diagramms . . . . . . . . . . . . . . . 5-10 2 Product Description Contents of this Chapter 2.1 General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 2.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 2.3 Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 2.4 Package Outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 PMB 2362 preliminary Product Description Confidential 2.1 General Description The PMB2362 is a dual band LNA circuit with excellent performance and minimum component count for GSM900 and GSM1800. 2.2 Features ■ Worldclass B6HF technology, fT = 25GHz ■ Lowest external component count ■ Extreme small outline P-TSSOP-10-2 package with heat sink for grounding ■ Both LNAs with prematched input, only 2 external matching components required ■ GSM900 LNA output matched to 50 Ohm ■ Both LNAs with switchable gain, 20dB gain step ■ LNA1: 17dB gain, 1.5dB noise figure @ 0.95GHz ■ LNA2: 19dB gain, 2.0dB noise figure @ 1.85GHz ■ Supply voltage range from 2.7V to 3.6V ■ Power down function ■ Temperature range -40° to 85°C 2.3 Application Wireless Components ■ Dual band wireless frontends GSM900/1800 ■ Excellent combination with Infineon GSM single chip SMARTi PMB6250 2-2 Specification, January 2000 PMB 2362 preliminary Product Description Confidential 2.4 Package Outlines P-TSSOP-10 (with Heat Sink): Wireless Components 2-3 Specification, January 2000 3 Functional Description Contents of this Chapter 3.1 Pin Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 3.2 Pin Definition and Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 3.3 Functional Block Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 3.4 Circuit Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 PMB 2362 preliminary Functional Description Confidential 3.1 Pin Configuration PD 1 10 GC Al1 2 9 AO1 GND 3 8 VCC Al2 4 7 AO2 BSW 5 6 VCCLNA PMB 2362 Heat Sink Connection for IC Grounding Pin_config.wmf Figure 3-1 Pin Configuration 3.2 Pin Definition and Function Table 3-1 Pin Definition and Function Pin No. Symbol Equivalent I/O-Schematic 1 PD Power down total circuit 2 AI1 LNA1 GSM900 signal base input 3 GND Internal not connected, external GND connection recommended 4 AI2 LNA2 GSM1800 signal base input 5 BSW Band switch, LNA1/LNA2 6 VCCLNA RF shunt open collector output LNA1/2 7 AO2 LNA2 amplifier output, open collector 8 VCC Supply voltage total circuit 9 AO1 LNA1 amplifier output, matched 10 GC LNA1/2 gain control Ground total circuit Heat Sink Wireless Components Function 3-2 Specification, January 2000 PMB 2362 preliminary Functional Description Confidential 3.3 Functional Block Diagram 1 10 PD GC 2 9 Al1 AO1 LNA1 8 BIAS 3 GND VCC 4 Al2 7 AO2 LNA2 5 6 BSW VCCLNA Heat Sink Connection for IC Grounding Funct_block.wmf Figure 3-2 Wireless Components Functional Block Diagram 3-3 Specification, January 2000 PMB 2362 preliminary Functional Description Confidential 3.4 Circuit Description 1. General Description The PMB2362 is a dual band LNA circuit designed for dual band wireless frontends with excellent performance. 2. LNA1 The LNA1 is designed for input frequencies between 0.9 and 1.0GHz. Entering the IC at the base input pin AI1 the RF input signal is amplified in the LNA1 stage. The gain of this LNA stage is controlled by the DC level at pin GC and can be adjusted in a 20 dB step. The LNA output is internal matched and at pin AO1 the amplified and matched signal is available for further use. 3. LNA2 The LNA2 is designed for input frequencies between 1.8 and 1.9GHz. Entering the IC at the base input pin AI2 the RF input signal is amplified in the LNA2 stage. The gain of this LNA stage is also controlled by the DC level at pin GC and can be adjusted in a fixed gain step. The open collector LNA output at pin AO2 has to be connected to VCC and external matching elements. 4. COMMON VCC is the supply voltage for both LNAs. The grounding is done with the heat sink at the bottom side of the package. An internal bias driver generates supply voltage and temperature compensated reference voltages. The PD pin allows the circuit to be switched in a low power consuming (sleeping) mode. All pins with the exception of GND are ESD protected. Wireless Components 3-4 Specification, January 2000 4 Applications Contents of this Chapter 4.1 Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 PMB 2362 preliminary Applications Confidential 4.1 Circuits PD 1 Al1 2 GND 3 Al2 4 10 GC 9 AO1 8 VCC 7 AO2 1 2 BSW 5 6 VCCLNA Appl_circuit.wmf Figure 4-1 Application Circuit LNA 1:925 MHz - 960 MHz LNA 2:1805 MHz - 1880 MHz Refer to PMB2362 Application Note Wireless Components 4-2 Specification, January 2000 5 Reference Contents of this Chapter 5.1 Absolute Maximum Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 5.2 Operating Ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 5.3 AC/DC Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 5.4 Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 5.5 Test Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 5.6 S-Parameters / Noise Parameters / Diagramms . . . . . . . . . . . . . . . 5-10 PMB 2362 preliminary Reference Confidential 5.1 Absolute Maximum Range The maximum ratings may not be exceeded under any circumstances, not even momentarily and individually, as permanent damage to the IC will result. Table 5-1 Absolute Maximum Range, Ambient temperature TAMB= -40°C ... + 85°C Symbol Parameter Limit Values min Unit Remarks max Supply Voltage VVCC -0.3 5.0 V Input Voltage VPD -0.3 VS +0.3, 5.0max. V Input Voltage VBSW -0.3 VS +0.3, 5.0max. V Input Voltage VGC -0.3 VS +0.3, 5.0max. V VPD>0.5V Input Voltage VGC -0.3 3.8 V VPD=0V Input Voltage (AC Peak, Freq.>1MHz) VAI1/2 VS -5.5, -2.0min. V VPD=0V IAI1/2<nA Open Collector Output Voltage VAO2/VCCLNA VS -5.5, -0.3min Input Current VS +2.0, 5.0max. V IAI1/2 6.0 mA Junction Temperature Tj 125 °C Storage Temperature TS 125 °C Thermal Resistance RthJA 100 K/W Junction to Ambient Thermal Resistance RthJL 12 K/W * Junction to Lead ESD integrity VESD +1000 V ** -40 -1000 DC and AC * Wireless Components * Heat Sink Temperature Fixed At 25 ° Celsius ** According to MIL STD 883D, method 3015.7 and ESD Assn. Standard S5.1 - 1993. 5-2 Specification, January 2000 PMB 2362 preliminary Reference Confidential 5.2 Operating Ratings Within the operational range the IC operates as described in the circuit description. The AC/DC characteristic limits are not guaranteed. Supply voltage VS = 2.7V...3.6V, Ambient temperature Tamb = -40°C...85°C Table 5-2 Operating Ratings Parameter Symbol Limit Values min Unit Test Conditions L Item max AI1 Input Frequency LNA1 fAI1 0.9 1.0 GHz AI2 Input Frequency LNA2 fAI2 1.8 1.9 GHz Total Circuit On VPD 1.5 VS V Total Circuit Off VPD 0 0.5 V Gain Control Low Gain VGC 1.5 VS V Gain Control High Gain VGC 0 0.5 V Bandswitch LNA1 On VBSW 0 0.5 V Bandswitch LNA2 On VBSW 1.5 VS V ■ This value is guaranteed by design Power levels refer to 50 Ohms impedance Wireless Components 5-3 Specification, January 2000 PMB 2362 preliminary Reference Confidential 5.3 AC/DC Characteristics AC/DC characteristics involve the spread of values guaranteed within the specified supply voltage and ambient temperature range. Typical characteristics are the median of the production. Supply voltage VVCC = 2.7V...3.6V, Ambient temperature Tamb = +25°C Table 5-3 AC/DC Characteristics Symbol Limit Values Unit min typ max Test Conditions L Item Supply Current Supply current, 0.95GHz I6,8,9 6.6 9.5 13 mA VPD high, VBSW low 1.1 Supply current, 1.85GHz I6,7,8 5.5 8.5 11.5 mA VPD high,VBSW high 1.2 Supply current, sleep I8 <5 <20 µA VPD low 1.3 LNA1, Signal Input AI1, high gain Input impedance vs. freq. S11 Max. input level, 1db comp. PAI1 Input intercept, third order IICPAI1 Noise figure FAI1 Table 1 Diagramm1 ■ 2.1** -20.5 -18.5 dBm f=0.95GHz ■ 2.2 -12 -10 dBm f=0.95GHz ■ 2.3* dB f=0.95GHz ■ 2.4* Diagramm1 ■ 2.5 1.5 2.2 LNA1, Signal Input AI1, low gain Input impedance vs. freq. S11 Max. input level, 1db comp. PAI1 Input intercept, third order IICPAI1 Noise figure FAI1 Table 1 -20.5 -18.5 dBm f=0.95GHz ■ 2.6 -12 -10 dBm f=0.95GHz ■ 2.7* dB f=0.95GHz ■ 2.8* 8.0 10.0 LNA1, Signal Output AO1, high gain Output impedance VSWR Output impedance vs. freq. S22 Power gain S21 1.5 f=0.95GHz Diagramm1 2.10** f=0.95GHz ■ 2.11* 1.5 f=0.95GHz ■ 2.12 Table 1 Diagramm1 ■ 13 f=0.95GHz ■ 2.14* Table 1 16 2.9 ■ 17 dB LNA1, Signal Output AO1, low gain Output impedance VSWR Output impedance vs. freq. S22 Power Gain S21 -4 -3 dB ■ This value is guaranteed by design. ** S21 low/high gain; S11, S22 @f = 950 MHz measured in production Wireless Components 5-4 Specification, January 2000 PMB 2362 preliminary Reference Confidential Table 5-3 AC/DC Characteristics (continued) Symbol Limit Values min typ Unit Test Conditions L Item Diagramm2 ■ 3.1** max LNA2, Signal Input AI2, high gain Input impedance vs. freq. S11 Max. input level, 1db comp. PAI2 -19 -17 dBm f=1.85GHz ■ 3.2 Input intercept, third order IICPAI2 -9.5 -7.5 dBm f=1.85GHz ■ 3.3* Noise figure FAI2 dB f=1.85GHz ■ 3.4* Diagramm ■ 3.5 Table 2 2.0 2.7 LNA2, Signal Input AI2, low gain Table 2 Input impedance vs. freq. S11 Max. input level, 1db comp. PAI2 -19 -17 dBm f=1.85GHz ■ 3.6 Input intercept, third order IICPAI2 -9.5 -7.5 dBm f=1.85GHz ■ 3.7* Noise figure FAI2 dB f=1.85GHz ■ 3.8* Diagramm ■ 3.9** f=1.85GHz ■ 3.10* Diagramm ■ 3.11 f=1.85GHz ■ 3.12* 11 13 LNA2, Signal Output AO2, Open Collector, high gain Output impedance vs. freq. S22 Power gain S21 Table 2 17 19 dB LNA2, Signal Output AO2, Open Collector, low gain Output impedance vs. freq. S22 Power gain S21 Table 2 -3 -3 dB ■ This value is guaranteed by design. * Measured with Application Circuit (Matched In- and Output) ** S21 low/high gain; S11, S22 @f=1.85GHz measured in production Remark: IICP3 Measured with 800kHz differential tone Wireless Components 5-5 Specification, January 2000 PMB 2362 preliminary Reference Confidential 5.4 Diagrams High Gain 0.95GHz Low Gain 0.95GHz Figure 5-1 Wireless Components Diagramm1: S11 / S22 LNA1 5-6 Specification, January 2000 PMB 2362 preliminary Reference Confidential 1.85GHz High Gain 1.85GHz Low Gain Figure 5-2 Wireless Components Diagramm2: S11 / S22 LNA2 5-7 Specification, January 2000 PMB 2362 preliminary Reference Confidential 5.5 Test Circuits 1. S-Parameter Test Circuit PD 1 Al1 2 GND 3 Al2 4 BSW 5 10 GC 9 AO1 8 VCC 7 AO2 1 2 6 VCCLNA Test_circuit_1_2.wmf Figure 5-3 S-Parameter Test Circuit Test Circuit 1: 925 MHz - 960 MHz Test Circuit 2: 1805 MHz - 1880 MHz Component values for blocking capacitors 10p @ VCC, 27p else Blocking capacitors at Pin: 1, 5, 6, 8 and 10 DC Biasing LNA2 via Network Analyzer Wireless Components 5-8 Specification, January 2000 PMB 2362 preliminary Reference Confidential 2. S-Parameter Measurement Conditions Pin x Port 1 Network analyzer ZL=50 W DUT Port 2 Pin y Test_circuit_3.wmf Figure 5-4 S-Parameter Measurement of LNA1/2 : S11, S12, S21, S22 The S-Parameters are tested at the indicated frequency on Duroid 5880 Teflon Boards. Via the NWA the capacitive coupling is done. The output levels at port1 and 2 for pin x and y are -30dbm. S11 and S22 have to be considered as design hints and are measured with Infineon testboards All S-Parameters are measured Table 5-4 Test Wireless Components Test frequency [MHz] Pin X Pin Y Amp. S11, S12, S21, S22 30 - 3000 Al 1/2 AO 1/2 Amp. S11, S12, S21, S22 900 - 1000 Al 1 AO 1 Amp. S11, S12, S21, S22 1800 - 1900 Al 2 AO 2 5-9 Specification, January 2000 PMB 2362 preliminary Reference Confidential 5.6 S-Parameters / Noise Parameters / Diagramms 1. Table 1: S-Parameter LNA1 S-Parameters are available on 3.5” disk or by E-mail High Gain Frequency [GHz] 0.81 0.84 0.87 0.9 0.93 0.96 0.99 1.02 1.05 1.08 1.11 S11 MAG 0.57468 0.57036 0.55963 0.54796 0.52863 0.5219 0.51085 0.49465 0.48186 0.46918 0.45961 ANG -89.9 -94.4 -98.7 -103.2 -106.7 -109.5 -113.3 -116.4 -118.7 -120.9 -122.8 S21 MAG 6.91583 7.13553 7.29022 7.39837 7.45604 7.40121 7.32031 7.25988 7.21209 7.21321 7.2465 ANG 131.3 126.7 121.9 116.7 112 107 102.8 98.8 95.2 91.4 87.4 S12 MAG 0.003029 0.003754 0.005167 0.006071 0.006278 0.007097 0.007674 0.007487 0.007213 0.007444 0.007427 ANG 108.8 109.1 91.5 78.7 88.5 82.7 71.5 66.2 65 55.4 61.9 S22 MAG 0.19661 0.16465 0.13922 0.12151 0.11372 0.12553 0.13011 0.13604 0.14442 0.15835 0.17981 ANG -161 -160.3 -155.6 -146.3 -134.4 -125.5 -122.2 -116.5 -110.5 -104.7 -100.4 S11 MAG 0.5257 0.51998 0.51502 0.51035 0.50507 0.50343 0.50052 0.49629 0.49323 0.48924 0.48684 ANG -92 -94.9 -97.9 -100.7 -103.5 -106.5 -109.4 -112.1 -114.9 -117.4 -120 S21 MAG 0.67474 0.69912 0.70104 0.70771 0.71506 0.71056 0.70932 0.70358 0.69611 0.69115 0.68395 ANG 133.8 130.1 124.8 121.5 117.2 113 109 104.8 100.9 96.8 92.7 S12 MAG 0.00148 0.00291 0.002866 0.00296 0.003721 0.004777 0.005215 0.005844 0.005821 0.006178 0.006651 ANG 129.6 152.6 142.9 127.3 129.3 127 115.4 112.1 107.1 102.7 97.5 S22 MAG 0.19295 0.15726 0.12124 0.08884 0.06165 0.05343 0.06368 0.08836 0.11838 0.1497 0.18416 ANG -166.1 -170.7 -171.1 -165.8 -152.2 -123.2 -96.2 -83 -78 -77.3 -78.6 Low Gain Frequency [GHz] 0.81 0.84 0.87 0.9 0.93 0.96 0.99 1.02 1.05 1.08 1.11 Noise Parameters @ 920MHz: Fmin = 1.33dB Wireless Components Rn = 6.17 5 - 10 Γopt: Mag: 0.132 Ang: 132.9 Specification, January 2000 PMB 2362 preliminary Reference Confidential 2. Table 2: S-Parameter LNA2 S-Parameters are available on 3.5” disk or by E-mail High Gain Frequency [GHz] 1.71 1.74 1.77 1.8 1.83 1.86 1.89 1.92 1.95 1.98 2.01 S11 MAG 0.49242 0.49159 0.49287 0.49257 0.49122 0.4897 0.49049 0.49163 0.48904 0.48789 0.48725 ANG -152.6 -154.5 -156.5 -158.1 -160 -161.9 -163.8 -165.6 -167.1 -169 -171.3 S21 MAG 6.88619 6.78958 6.67339 6.54866 6.44234 6.35383 6.22605 6.11839 6.01005 5.90915 5.81244 ANG 44 42.2 40.3 38.5 36.8 34.8 33 31.3 29.5 27.7 25.9 S12 MAG 0.009319 0.010126 0.010619 0.010952 0.011616 0.012092 0.011617 0.013675 0.013032 0.013869 0.01401 ANG 106.7 112.5 107.5 103.6 109.8 100.5 104.6 102.4 101.7 99.9 99.3 S22 MAG 0.97152 0.97075 0.96835 0.96761 0.97078 0.97236 0.97083 0.96812 0.96681 0.96768 0.96638 ANG -52.6 -53.6 -54.9 -55.9 -57.1 -58.1 -59.5 -60.6 -61.6 -62.7 -63.9 S11 MAG 0.49151 0.49043 0.49071 0.48723 0.4821 0.48296 0.48488 0.48525 0.48228 0.47885 0.47693 ANG -156.7 -158.9 -161 -162.9 -164.6 -166.4 -168.5 -170.6 -172.4 -174.6 -177 S21 MAG 0.61223 0.59784 0.58151 0.56316 0.5627 0.5553 0.53698 0.52048 0.50395 0.48973 0.47446 ANG 43.4 41.5 39.8 38.4 37.7 34.4 32.1 30.1 28 26.3 24.4 S12 MAG 0.005883 0.006472 0.006974 0.007237 0.008687 0.008648 0.009628 0.008635 0.009701 0.009804 0.009466 ANG 137.2 130.3 127.6 127.7 123.6 126.1 121.2 119.8 116.5 117.5 111.3 S22 MAG 0.95592 0.95576 0.95311 0.95262 0.95109 0.94994 0.94908 0.94747 0.94531 0.94528 0.94391 ANG -49.2 -50.2 -51.3 -52.2 -53.2 -54.2 -55.2 -56.1 -57 -57.9 -58.8 Low Gain Frequency [GHz] 1.71 1.74 1.77 1.8 1.83 1.86 1.89 1.92 1.95 1.98 2.01 Noise Parameters @ 1.82GHz: Fmin = 1.86dB Wireless Components Rn = 6.76 5 - 11 Γopt: Mag: 0.197 Ang: -164.4 Specification, January 2000