ALUMINUM ELECTROLYTIC CAPACITORS CD Chip Type, Low Impedance series Chip type, low impedance temperature range up to +105°C. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine using carrier tape. Adapted to the RoHS directive (2002/95/EC). CD UD Low Impedance Specifications Item Performance Characteristics Category Temperature Range – 55 ~ +105°C Rated Voltage Range 6.3 ~ 100V Rated Capacitance Range 1 ~ 3300µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C 6.3 0.26 Rated voltage (V) tan δ (MAX.) tan δ 10 0.19 16 0.16 25 0.14 35 0.12 50 0.10 63 0.08 80 0.08 100 0.07 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature 10 16 25 35 50 63 80 100 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 4 4 4 3 3 3 3 3 3 Z—25°C / Z+20°C Impecance ratio Z—40°C / Z+20°C ZT / Z20 (MAX.) Z—55°C / Z+20°C After 5000 hours' (2000 hours for L 10 mm: 50V 10mm: 63V or more) application of or less, and for L Endurance 6.3 rated voltage at 105°C, capacitors meet the characteristics requirements listed at right. Capacitance Change Within ± 30% of initial value for capacitors tan δ 200% or less initial specified value 300% or less initial specified value for 63V or more Leakage current Initial specified value or less After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Shelf Life The capacitors shall be kept on the hot plate maintained at 250°C for 30 seconds. After removing from the hot plate and restored Resistance to soldering heat at room temperature, they meet the characteristics requirements listed at right. Capacitance Change Within ± 10% of initial value tan δ Initial specified value or less Leakage current Initial specified value or less Black print on the case top. Marking Chip Type Type numbering system (Example : 16V 100µF) (φ4 ~ φ8 × 6.2) Positive Capacitance Lot No. L ± 0.3 2 3 4 5 6 7 8 9 Package code Size Package φ4 ~ 10 Taping φ12.5 ~ 18 Taping φ12.5 ~ 18 Tray Capacitance tolerance (±20%) 1: Size φ8 × 6.2 only Rated Capacitance (100µF) Positive E L ± 0.5 Negative H 0.3 MAX. Pressure relief vent Capacitance E B ± 0.2 φ D ± 0.5 nichicon 330 µF CD 50V H0515 Lot No. (mm) φD×L A B C E L H Dimension table in next page. φD×L A B C E L H 8 × 10 10 × 10 4 × 5.8 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 6.2 2.9 3.2 3.3 1.8 2.1 2.4 2.4 8.3 10.3 8.3 4.3 5.3 6.6 6.6 8.3 10.3 8.3 4.3 5.3 6.6 6.6 3.1 4.5 2.3 1.0 1.3 2.2 2.2 10 10 6.2 5.8 5.8 5.8 7.7 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.8 ~ 1.1 0.8 ~ 1.1 12.5 × 13.5 16 × 16.5 18 × 16.5 4.8 5.4 6.4 13.6 17.1 19.1 13.6 17.1 19.1 4.0 6.3 6.3 13.5 16.5 16.5 1.0 ~ 1.4 1.0 ~ 1.4 1.0 ~ 1.4 Voltage L ± 1.0 Series A ± 0.2 A ± 0.2 C ± 0.2 0.5 MAX. Plastic platform Voltage φD Code 4 ~ 6.3 CL 8 (6.2L) CL 8 (10L) • 10 NL 12.5~18 NQ Type Positive (φ12.5 ~ φ18) Trade mark Rated voltage (16V) Series name A ± 0.2 A ± 0.2 Pressure relief vent Capacitance Lot No. C ± 0.2 B±0.2 A2 220E CD Trade mark φD ± 0.5 Series 0.5 MAX. Plastic platform 0.3 MAX. Code GS MS ZD Size code Configuration Negative H (φ8 × 10, φ10 × 10) Voltage ( E : 25V ) 10 11 12 13 14 A ± 0.2 A ± 0.2 C ± 0.2 B ± 0.2 A2 47 j CD φD ± 0.5 Series 1 Trade mark E Voltage ( j : 6.3V ) 1 UCD 1 C 1 0 1 M C L 1 GS 0.5 MAX. Plastic platform 0.3 MAX. H Negative V 6.3 10 16 25 35 50 63 80 100 Code j A C E V H J K 2A CAT.8100V-3 ALUMINUM ELECTROLYTIC CAPACITORS CD series Dimensions Cap. (µF) V 6.3 10 16 25 35 50 Code 0J 1A 1C 1E 1V 1H 1 010 4 × 5.8 2.70 60 2.2 2R2 4 × 5.8 2.70 60 3.3 3R3 4 × 5.8 2.70 60 4.7 4R7 60 10 15 22 27 33 47 100 150 220 270 330 470 4 × 5.8 1.35 4 × 5.8 1.35 90 90 5 × 5.8 0.70 4 × 5.8 1.35 90 5 × 5.8 0.70 160 160 4 × 5.8 1.35 90 5 × 5.8 0.70 160 4 × 5.8 1.35 90 5 × 5.8 0.70 160 6.3 × 5.8 0.36 240 4 × 5.8 1.35 4 × 5.8 1.35 90 4 × 5.8 1.35 90 5 × 5.8 0.70 160 5 × 5.8 0.70 160 90 6.3 × 5.8 0.36 5 × 5.8 0.70 160 6.3 × 5.8 0.36 240 240 4 × 5.8 1.35 5 × 5.8 0.70 160 5 × 5.8 0.70 160 6.3 × 5.8 0.36 240 5 × 5.8 0.70 160 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 90 240 4 × 5.8 1.35 90 4 × 5.8 2.70 4 × 5.8 1.35 90 5 × 5.8 1.50 90 5 × 5.8 0.70 160 6.3 × 5.8 0.86 170 5 × 5.8 0.70 160 6.3 × 5.8 0.86 170 6.3 × 5.8 195 240 6.3 × 7.7 0.66 0.36 8 × 6.2 0.63 200 6.3 × 7.7 0.66 195 8 × 6.2 0.63 200 8 × 10 0.32 350 6.3 × 5.8 0.36 240 56 560 5 × 5.8 0.70 160 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 240 68 680 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 240 6.3 × 7.7 0.32 290 5 × 5.8 0.70 160 6.3 × 7.7 0.32 290 6.3 × 7.7 0.32 290 6.3 × 5.8 0.36 240 8 × 6.2 0.26 300 8 × 10 0.16 600 6.3 × 5.8 0.36 240 8 × 10 0.16 600 8 × 10 0.16 600 10 × 10 0.16 700 8 × 10 0.16 600 8 × 10 0.16 600 10 × 10 0.16 700 850 12.5 × 13.5 0.12 900 0.12 900 100 150 220 330 101 151 221 331 6.3 × 5.8 0.36 6.3 × 7.7 0.32 290 8 × 6.2 0.26 300 240 6.3 × 5.8 0.36 6.3 × 5.8 0.36 6.3 × 7.7 0.32 8 × 6.2 6.3 × 5.8 0.36 240 6.3 × 7.7 0.32 290 290 6.3 × 7.7 0.32 290 0.26 300 8 × 6.2 0.26 300 8 × 10 0.16 600 8 × 10 0.16 600 8 × 10 0.16 600 10 × 10 0.08 8 × 10 0.16 600 8 × 10 0.16 600 10 × 10 0.08 850 12.5 × 13.5 0.08 1100 16 × 16.5 0.073 1610 10 × 10 0.08 850 12.5 × 13.5 0.08 1100 16 × 16.5 0.073 1610 12.5 × 13.5 0.08 1100 240 12.5 × 13.5 390 391 470 471 8 × 10 0.16 600 680 681 8 × 10 0.16 600 10 × 10 0.08 850 1000 102 8 × 10 0.16 600 10 × 10 0.08 850 1500 152 10 × 10 0.08 850 2200 222 12.5 × 13.5 0.08 1100 3300 332 Cap. (µF) 80 1K 100 220 5 × 5.8 3.00 50 6.3 × 5.8 1.50 6.3 × 7.7 1.20 120 8 × 6.2 1.20 120 80 1100 16 × 16.5 0.035 1800 Case size Rated Impedance φD × L ripple 100 2A 5 × 5.8 5.00 25 6.3 × 5.8 3.00 40 6.3 × 7.7 2.40 60 8 × 6.2 2.40 60 8 × 10 1.30 130 8 × 10 1.30 130 33 330 8 × 10 0.65 250 8 × 10 1.30 130 10 × 10 0.70 200 47 470 8 × 10 0.65 250 10 × 10 0.70 200 12.5 × 13.5 0.32 500 68 680 10 × 10 0.35 400 12.5 × 13.5 0.32 500 12.5 × 13.5 0.32 500 100 101 10 × 10 0.35 400 12.5 × 13.5 0.32 500 16 × 16.5 0.17 793 150 151 12.5 × 13.5 0.16 800 12.5 × 13.5 0.32 500 16 × 16.5 0.17 793 220 221 12.5 × 13.5 0.16 800 18 × 16.5 0.15 917 330 331 0.15 917 470 471 16 × 16.5 0.082 1410 680 681 18 × 16.5 0.08 16 × 16.5 0.035 1800 (mm) 1J 4R7 0.08 1100 63 4.7 22 0.08 V 3R3 10 12.5 × 13.5 12.5 × 13.5 Code 3.3 240 16 × 16.5 0.17 793 18 × 16.5 18 × 16.5 0.15 917 Case size Rated Impedance φD × L ripple (mm) 1690 Max. Impedance (Ω) at 20°C 100kHz, Rated Ripple (mArms) at 105°C 100kHz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz~ Coefficient 0.35 0.50 0.64 0.83 1.00 Taping specifications are given in page 24. Recommended land size, soldering by refrow are given in page 25, 26. Please refer to page 3 for the minimum order quantity. CAT.8100V-3