ALUMINUM ELECTROLYTIC CAPACITORS PB Miniature Sized, High Ripple Current High Reliability series High ripple current load life of 5000 / 7000 hours at +105°C. Suited for ballast application. Adapted to the RoHS directive (2002/95/EC). CA PB Long Life Smaller PT Specifications Item Performance Characteristics Category Temperature Range – 40 ~ +105°C (10 ~ 50V), – 25 ~ +105°C (160 ~ 450V) Rated Voltage Range 10 ~ 450V Rated Capacitance Range 0.47 ~ 3300µF Capacitance Tolerance ± 20% at 120Hz, 20°C Rated Voltage (V) Leakage Current 10 ~ 50V 160 ~ 450V After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. ——— After 2 minutes' application of rated voltage, leakage current is not more than 0.06CV+10 (µA) . Measurement frequency : 120Hz, Temperature : 20°C tan δ Rated voltage (V) tan δ (MAX.) 10 0.30 16 0.25 25 0.22 35 0.18 50 0.15 160 0.15 200 0.15 250 0.15 350 0.20 400 0.24 450 0.24 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C 10 3 16 2 After an application of D.C. bias voltage plus the rated ripple current for 5000 hours (φ10 · φ12.5 (10 ~ 50V) : 7000 hours) at 105°C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed at right. Endurance 25 2 35 2 50 2 Capacitance change tan δ Leakage current 160 3 200 3 250 3 350 4 400 6 450 6 Within ± 30% of initial value (10 ~ 50V) Within ± 20% of initial value (160 ~ 450V) 300% or less of initial specified value (10 ~ 50V) 200% or less of initial specified value (160 ~ 450V) Initial specified value or less Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Type numbering system (Example : 160V 22µF) Radial Lead Type Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 d UPB 2 C 2 2 0 M PD f P ± 0.5 D+ MAX f Pressure relief vent (f6.3up) L + MAX 15MIN 4MIN D 5 6.3 8 10 12.5 P 2.0 2.5 3.5 5.0 5.0 fd 0.5 0.5 0.6 0.6 0.6 0.5 0.5 0.5 0.5 0.5 f (mm) 16 18 22 25 7.5 7.5 10.0 12.5 0.8 0.8 1.0 1.0 0.5 0.5 1.0 1.0 (fD 18) 1.5 (fD 22) 2.0 Size code Configuration Capacitance tolerance (±20%) Rated Capacitance (22µF) Rated voltage (160V) Series name Type Configuration Pb-free leadwire fD Pb-free PET sleeve 5 DD 6.3 ED 8 á 10 PD 12.5 ~ 18 HD 22 á 25 RD • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS PB series Dimensions 10 1A V Cap.(µF) Code R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 222 332 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 5 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 16 12.5 × 20 12.5 × 25 16 1C 6.3 × 11 8 × 11.5 8 × 11.5 10 × 12.5 10 × 20 12.5 × 25 70 100 150 180 350 550 810 25 1E 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 12.5 × 20 85 130 195 270 430 710 35 1V 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 55 95 195 255 325 500 50 1H 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 16 10 × 20 12.5 × 20 5 10 15 20 25 30 40 55 65 100 235 295 370 Case size φ D × L(mm) Rated ripple 50 60 100 200 280 350 570 Rated Ripple (mArms) at 105°C 120Hz 160 2C V Cap.(µF) Code 100 22 220 10 × 20 33 330 10 × 20 47 470 12.5 × 20 56 560 680 82 820 250 2E 350 2V 250 500 250 500 300 600 250 500 300 600 300 600 10 × 20 12.5 × 20 12.5 × 20 300 600 300 600 350 700 12.5 × 20 12.5 × 20 12.5 × 25 16 × 25 125 250 175 350 250 500 325 650 18 × 25 400 800 18 × 31.5 500 1000 575 1150 650 1300 750 1500 12.5 × 20 16 × 20 12.5 × 25 16 × 25 550 1100 12.5 × 25 375 750 16 × 25 550 1100 120 121 150 151 180 181 220 221 18 × 31.5 270 271 18 × 31.5 330 331 18 × 31.5 390 391 18 × 35.5 470 471 18 × 40 560 561 22 × 40 680 681 22 × 50 25 × 40 820 821 25 × 50 16 × 25 500 1000 18 × 25 600 1200 18 × 35.5 18 × 25 650 1300 650 1300 18 × 25 18 × 31.5 18 × 35.5 850 1700 950 1900 1050 2100 1150 2300 1350 2700 1500 3000 850 1700 950 1900 1050 2100 1150 2300 18 × 40 22 × 40 18 × 40 22 × 40 18 × 40 22 × 40 16 × 25 18 × 25 18 × 31.5 22 × 50 25 × 40 Cap.(µF) Frequency 0.47 ~ 100 0022 ~ 4700 1000 ~ 3300 010 ~ 820 18 × 40 22 × 40 125 250 200 400 300 600 375 750 12.5 × 20 16 × 25 18 × 25 18 × 31.5 22 × 50 25 × 40 450 900 500 1000 550 1100 600 1200 18 × 40 22 × 40 22 × 50 25 × 40 25 × 50 22 × 50 25 × 40 25 × 50 25 × 50 25 × 50 22 × 50 25 × 40 750 1500 850 1700 950 1900 1050 2100 150 300 275 550 350 700 425 850 475 950 500 1000 550 1100 700 1400 800 1600 800 1600 900 1800 950 1900 1050 2100 1150 2300 1400 2800 1350 2700 1500 3000 25 × 50 Case Size Rated φ D × L(mm) ripple Frequency coefficient of rated ripple current 160 ~ 450 12.5 × 25 18 × 35.5 101 10 ~ 50 10 × 20 18 × 35.5 375 750 100 V 450 2W 400 2G 10 × 20 10 68 200 2D 50Hz 0.75 0.85 0.95 0.60 120Hz 1.00 1.00 1.00 1.00 300Hz 1.20 1.10 1.03 1.20 1kHz 1.40 1.20 1.05 1.60 10k ~ 50kHz 100kHz 1.55 1.65 1.25 1.30 1.10 1.15 1.80 2.00 : Rated ripple (mArms) at 105°C 120Hz : Rated ripple (mArms) at 105°C 100kHz : In this case, 6 will be put at 12th digit of type numbering system. Wider range of rating. CAT.8100V