VEMD2023SLX01 www.vishay.com Vishay Semiconductors Silicon PIN Photodiode FEATURES • Package type: surface mount • Package form: side view • Dimensions (L x W x H in mm): 2.3 x 2.55 x 2.3 • AEC-Q101 qualified • High radiant sensitivity • Daylight blocking filter matched with 830 nm to 950 nm IR emitters • Fast response times • Angle of half sensitivity: = ± 35° DESCRIPTION • Package matched with IR emitter series VSMB2943SLX01 VEMD2023SLX01 is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with dome lens and daylight blocking filter. Filter is matched with IR emitters operating at wavelength of 830 nm to 950 nm. The photo sensitive area of the chip is 0.23 mm2. • Floor life: 4 weeks, MSL 2a, acc. J-STD-020 • Lead (Pb)-free reflow soldering • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • High speed photo detector • Infrared remote control • Infrared data transmission • Photo interrupters • IR touch panels PRODUCT SUMMARY COMPONENT VEMD2023SLX01 Ira (μA) (deg) 0.5 (nm) 10 ± 35 750 to 1050 Note • Test conditions see table “Basic Characteristics” ORDERING INFORMATION ORDERING CODE PACKAGING REMARKS PACKAGE FORM VEMD2023SLX01 Tape and reel MOQ: 3000 pcs, 3000 pcs/reel Side view Note • MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Reverse voltage Power dissipation Tamb 25 °C Junction temperature Operating temperature range Storage temperature range Soldering temperature Thermal resistance junction/ambient Rev. 1.0, 04-Apr-13 SYMBOL VALUE VR 60 UNIT V PV 215 mW Tj 100 °C Tamb - 40 to + 100 °C °C Tstg - 40 to + 100 Acc. reflow solder profile fig. 7 Tsd 260 °C Acc. J-STD-051 RthJA 250 K/W Document Number: 83493 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMD2023SLX01 www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL IF = 50 mA VF IR = 100 μA, E = 0 V(BR) VR = 10 V, E = 0 Iro Forward voltage Breakdown voltage Reverse dark current Diode capacitance Open circuit voltage MIN. TYP. MAX. UNIT 1 V 32 V 1 10 nA VR = 0 V, f = 1 MHz, E = 0 CD 4 VR = 5 V, f = 1 MHz, E = 0 CD 1.3 pF Ee = 1 mW/cm2, = 950 nm Vo 350 mV mV/K pF Temperature coefficient of Vo Ee = 1 mW/cm2, = 950 nm TKVo - 2.6 Short circuit current Ee = 1 mW/cm2, = 950 nm Ik 10 μA Temperature coefficient of Ik Ee = 1 mW/cm2, = 950 nm TKIk 0.1 %/K Ee = 1 mW/cm2, = 950 nm, VR = 5 V Ira Reverse light current 7 Angle of half sensitivity 10 14 μA ± 35 deg Wavelength of peak sensitivity p 940 nm Range of spectral bandwidth 0.5 750 to 1050 nm Rise time VR = 10 V, RL = 1 k, = 820 nm tr 100 ns Fall time VR = 10 V, RL = 1 k, = 820 nm tf 100 ns BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 100 Ira - Reverse Light Current (µA) Iro - Reverse Dark Current (nA) 1000 100 10 VR = 10 V 1 20 94 8427 40 60 1 0.1 1 10 Ee - Irradiance (mW/cm2) Tamb - Ambient Temperature (°C) Fig. 1 - Reverse Dark Current vs. Ambient Temperature Fig. 3 - Reverse Light Current vs. Irradiance 8 1.4 CD - Diode Capacitance (pF) Ira, rel - Relative Reverse Light Current 10 0.1 0.01 100 80 VR = 5 V VR = 5 V λ = 950 nm 1.2 1.0 0.8 6 E=0 f = 1 MHz 4 2 0 0.6 0 94 8416 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 2 - Relative Reverse Light Current vs. Ambient Temperature Rev. 1.0, 04-Apr-13 0.1 94 8430 1 10 100 VR- Reverse Voltage (V) Fig. 4 - Diode Capacitance vs. Reverse Voltage Document Number: 83493 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMD2023SLX01 www.vishay.com Vishay Semiconductors 0° 10° 20° 30° 1.0 0.8 0.6 0.4 0.2 0 600 700 800 900 1000 1.0 0.9 50° 0.8 60° 1100 70° 80° 0.7 0.6 0.4 0.2 0 λ - Wavelength (nm) 21554 Fig. 5 - Relative Spectral Sensitivity vs. Wavelength REFLOW SOLDER PROFILE max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 max. 30 s 150 max. 100 s 100 max. ramp up 3 °C/s max. ramp down 6 °C/s 50 0 0 19841 50 100 150 200 250 Devices are packed in moisture barrier bags (MBB) to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant. FLOOR LIFE Floor life (time between soldering and removing from MBB) must not exceed the time indicated on MBB label: Floor life: 4 weeks Conditions: Tamb < 30 °C, RH < 60 % Moisture sensitivity level 2a, acc. to J-STD-020. 200 max. 120 s Fig. 6 - Relative Radiant Intensity vs. Angular Displacement DRYPACK 300 Temperature (°C) 40° ϕ - Angular Displacement Srel - Relative Radiant Sensitivity S (λ)rel - Relative Spectral Sensitivity 1.2 300 Time (s) DRYING In case of moisture absorption devices should be baked before soldering. Conditions see J-STD-020 or label. Devices taped on reel dry using recommended conditions 192 h at 40 °C (+ 5 °C), RH < 5 %. Fig. 7 - Lead (Pb)-free Reflow Solder Profile acc. J-STD-020D Rev. 1.0, 04-Apr-13 Document Number: 83493 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMD2023SLX01 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters: VEMD2023SL Rev. 1.0, 04-Apr-13 Document Number: 83493 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMD2023SLX01 www.vishay.com Vishay Semiconductors TAPING AND REEL DIMENSIONS in millimeters: VEMD2023SL Reel Unreel direction Ø 13 ±0 .5 Ø 330 ± 1 0.5 5± Ø 62 ± 0.5 2. Tape position coming out from reel 3000 pcs / reel technical drawings according to DIN specifications Label posted here 12.4 ± 1.5 Leader and tailer tape: Empty (160 mm min.) Parts mounted Direction of pulling out 1.75 ± 0.1 Empty (400 mm min.) Terminal position in tape Lead II Cathode Rev. 1.0, 04-Apr-13 5.5 ± 0.05 Emitter Drawing refers to following types: Reel dimensions and tape X 2:1 Ø1.55 ± 0.05 I Anode +0.3 12 -0.1 Lead I Device VSMB2943SLX01 VSMF2893SLX01 Cathode VSMB2948SL VEMD2023SLX01 VEMD2523SLX01 VEMT2023SLX01 Collector VEMT2523SLX01 Anode VSMY2853SL 4 ±0.1 2 ± 0.05 8 ± 0.1 II 2.85± 0.1 see table Drawing-No.: 9.800-5123.01-4 Issue: 2; 19.02.13 Document Number: 83493 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000